diff mbox series

[2/6] scsi: message: fusion: struct _CONFIG_PAGE_SAS_IO_UNIT_0: Replace 1-element array with flexible array

Message ID 20240711172821.123936-2-kees@kernel.org (mailing list archive)
State Accepted
Headers show
Series scsi: message: fusion: Replace 1-element arrays with flexible arrays | expand

Commit Message

Kees Cook July 11, 2024, 5:28 p.m. UTC
Replace the deprecated[1] use of a 1-element array in
struct _CONFIG_PAGE_SAS_IO_UNIT_0 with a modern flexible array.

Additionally add __counted_by annotation since PhyData is only ever
accessed via a loops bounded by NumPhys:

lsi/mpi_cnfg.h:    MPI_SAS_IO_UNIT0_PHY_DATA       PhyData[] __counted_by(NumPhys);    /* 10h */
mptsas.c:       port_info->num_phys = buffer->NumPhys;
mptsas.c:       for (i = 0; i < port_info->num_phys; i++) {
mptsas.c:               mptsas_print_phy_data(ioc, &buffer->PhyData[i]);
mptsas.c:               port_info->phy_info[i].phy_id = i;
mptsas.c:               port_info->phy_info[i].port_id =
mptsas.c:                   buffer->PhyData[i].Port;
mptsas.c:               port_info->phy_info[i].negotiated_link_rate =
mptsas.c:                   buffer->PhyData[i].NegotiatedLinkRate;

No binary differences are present after this conversion.

Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
---
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
---
 drivers/message/fusion/lsi/mpi_cnfg.h | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

Comments

Gustavo A. R. Silva July 11, 2024, 6:14 p.m. UTC | #1
On 11/07/24 11:28, Kees Cook wrote:
> Replace the deprecated[1] use of a 1-element array in
> struct _CONFIG_PAGE_SAS_IO_UNIT_0 with a modern flexible array.
> 
> Additionally add __counted_by annotation since PhyData is only ever
> accessed via a loops bounded by NumPhys:
> 
> lsi/mpi_cnfg.h:    MPI_SAS_IO_UNIT0_PHY_DATA       PhyData[] __counted_by(NumPhys);    /* 10h */
> mptsas.c:       port_info->num_phys = buffer->NumPhys;
> mptsas.c:       for (i = 0; i < port_info->num_phys; i++) {
> mptsas.c:               mptsas_print_phy_data(ioc, &buffer->PhyData[i]);
> mptsas.c:               port_info->phy_info[i].phy_id = i;
> mptsas.c:               port_info->phy_info[i].port_id =
> mptsas.c:                   buffer->PhyData[i].Port;
> mptsas.c:               port_info->phy_info[i].negotiated_link_rate =
> mptsas.c:                   buffer->PhyData[i].NegotiatedLinkRate;
> 
> No binary differences are present after this conversion.
> 
> Link: https://github.com/KSPP/linux/issues/79 [1]
> Signed-off-by: Kees Cook <kees@kernel.org>

Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>

Thanks!
diff mbox series

Patch

diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index f59a741ef21c..c7997e32e82e 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -2547,14 +2547,6 @@  typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA
 } MPI_SAS_IO_UNIT0_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT0_PHY_DATA,
   SasIOUnit0PhyData, MPI_POINTER pSasIOUnit0PhyData;
 
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI_SAS_IOUNIT0_PHY_MAX
-#define MPI_SAS_IOUNIT0_PHY_MAX         (1)
-#endif
-
 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
 {
     CONFIG_EXTENDED_PAGE_HEADER     Header;                             /* 00h */
@@ -2563,7 +2555,7 @@  typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
     U8                              NumPhys;                            /* 0Ch */
     U8                              Reserved2;                          /* 0Dh */
     U16                             Reserved3;                          /* 0Eh */
-    MPI_SAS_IO_UNIT0_PHY_DATA       PhyData[MPI_SAS_IOUNIT0_PHY_MAX];   /* 10h */
+    MPI_SAS_IO_UNIT0_PHY_DATA       PhyData[] __counted_by(NumPhys);    /* 10h */
 } CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0,
   SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t;