Message ID | 20240905220214.738506-6-bvanassche@acm.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Simplify the UFS driver initialization code | expand |
On 9/5/2024 3:01 PM, Bart Van Assche wrote: > Move the ufshcd_device_init() call to the ufshcd_probe_hba() callers and > remove the 'init_dev_params' argument of ufshcd_probe_hba(). This change > refactors the code without modifying the behavior of the UFSHCI driver. > This change prepares for moving one ufshcd_device_init() call into > ufshcd_init(). > > Signed-off-by: Bart Van Assche <bvanassche@acm.org> > --- > drivers/ufs/core/ufshcd.c | 25 +++++++++++++------------ > 1 file changed, 13 insertions(+), 12 deletions(-) > > diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c > index e2137bcf3de7..6e3cffcdf9a6 100644 > --- a/drivers/ufs/core/ufshcd.c > +++ b/drivers/ufs/core/ufshcd.c > @@ -298,7 +298,8 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba); > static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd); > static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag); > static void ufshcd_hba_exit(struct ufs_hba *hba); > -static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params); > +static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params); > +static int ufshcd_probe_hba(struct ufs_hba *hba); > static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on); > static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba); > static int ufshcd_host_reset_and_restore(struct ufs_hba *hba); > @@ -7693,8 +7694,11 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) > err = ufshcd_hba_enable(hba); > > /* Establish the link again and restore the device */ > - if (!err) > - err = ufshcd_probe_hba(hba, false); In the original code, if ufshcd_probe_hba()->ufshcd_device_init() fails, the hba->ufshcd_state is updated to UFSHCD_STATE_ERROR; > + if (!err) { > + err = ufshcd_device_init(hba, /*init_dev_params=*/false); Calling ufshcd_device_init() here changes the behavior of the code slightly. If the ufshcd_device_init() fails, it exits without updating the hba->ufshcd_state to UFSHCD_STATE_ERROR. > + if (!err) > + err = ufshcd_probe_hba(hba); > + } > > if (err) > dev_err(hba->dev, "%s: Host init failed %d\n", __func__, err); > @@ -8830,21 +8834,16 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params) > /** > * ufshcd_probe_hba - probe hba to detect device and initialize it > * @hba: per-adapter instance > - * @init_dev_params: whether or not to call ufshcd_device_params_init(). > * > * Execute link-startup and verify device initialization > * > * Return: 0 upon success; < 0 upon failure. > */ > -static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) > +static int ufshcd_probe_hba(struct ufs_hba *hba) > { > ktime_t start = ktime_get(); > unsigned long flags; > - int ret; > - > - ret = ufshcd_device_init(hba, init_dev_params); > - if (ret) > - goto out; > + int ret = 0; > > if (!hba->pm_op_in_progress && > (hba->quirks & UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH)) { > @@ -8862,7 +8861,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) > } > > /* Reinit the device */ > - ret = ufshcd_device_init(hba, init_dev_params); > + ret = ufshcd_device_init(hba, /*init_dev_params=*/false); Originally, the ufshcd_async_scan()->ufshcd_probe_hba() has the init_dev_params = true. However the init_dev_params is updated to false here for the ufshcd_async_scan()->ufshcd_probe_hba() path. > if (ret) > goto out; > } > @@ -8910,7 +8909,9 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie) > > down(&hba->host_sem); > /* Initialize hba, detect and initialize UFS device */ > - ret = ufshcd_probe_hba(hba, true); > + ret = ufshcd_device_init(hba, /*init_dev_params=*/true); Same issue as mentioned earlier. If ufshcd_device_init() fails here, the hba->ufshcd_state is not updated to UFSHCD_STATE_ERROR. Compared to the original ufshcd_probe_hba()->ufshcd_device_init() failure would update hba->ufshcd_state. Thanks, Bao > + if (ret == 0) > + ret = ufshcd_probe_hba(hba); > up(&hba->host_sem); > if (ret) > goto out; >
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index e2137bcf3de7..6e3cffcdf9a6 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -298,7 +298,8 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba); static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd); static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag); static void ufshcd_hba_exit(struct ufs_hba *hba); -static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params); +static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params); +static int ufshcd_probe_hba(struct ufs_hba *hba); static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on); static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba); static int ufshcd_host_reset_and_restore(struct ufs_hba *hba); @@ -7693,8 +7694,11 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) err = ufshcd_hba_enable(hba); /* Establish the link again and restore the device */ - if (!err) - err = ufshcd_probe_hba(hba, false); + if (!err) { + err = ufshcd_device_init(hba, /*init_dev_params=*/false); + if (!err) + err = ufshcd_probe_hba(hba); + } if (err) dev_err(hba->dev, "%s: Host init failed %d\n", __func__, err); @@ -8830,21 +8834,16 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params) /** * ufshcd_probe_hba - probe hba to detect device and initialize it * @hba: per-adapter instance - * @init_dev_params: whether or not to call ufshcd_device_params_init(). * * Execute link-startup and verify device initialization * * Return: 0 upon success; < 0 upon failure. */ -static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) +static int ufshcd_probe_hba(struct ufs_hba *hba) { ktime_t start = ktime_get(); unsigned long flags; - int ret; - - ret = ufshcd_device_init(hba, init_dev_params); - if (ret) - goto out; + int ret = 0; if (!hba->pm_op_in_progress && (hba->quirks & UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH)) { @@ -8862,7 +8861,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) } /* Reinit the device */ - ret = ufshcd_device_init(hba, init_dev_params); + ret = ufshcd_device_init(hba, /*init_dev_params=*/false); if (ret) goto out; } @@ -8910,7 +8909,9 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie) down(&hba->host_sem); /* Initialize hba, detect and initialize UFS device */ - ret = ufshcd_probe_hba(hba, true); + ret = ufshcd_device_init(hba, /*init_dev_params=*/true); + if (ret == 0) + ret = ufshcd_probe_hba(hba); up(&hba->host_sem); if (ret) goto out;
Move the ufshcd_device_init() call to the ufshcd_probe_hba() callers and remove the 'init_dev_params' argument of ufshcd_probe_hba(). This change refactors the code without modifying the behavior of the UFSHCI driver. This change prepares for moving one ufshcd_device_init() call into ufshcd_init(). Signed-off-by: Bart Van Assche <bvanassche@acm.org> --- drivers/ufs/core/ufshcd.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-)