diff mbox series

[1/3] scsi: ufs-qcom: Add support for dumping HW and SW hibern8 count

Message ID 20241025055054.23170-2-quic_mapa@quicinc.com (mailing list archive)
State New, archived
Headers show
Series scsi: ufs-qcom: Enable Dumping of Hibern8, MCQ, and Testbus Registers | expand

Commit Message

Manish Pandey Oct. 25, 2024, 5:50 a.m. UTC
This patch adds functionality to dump both hardware and software
hibern8 enter counts. This enhancement will aid in monitoring and
debugging hibern8 state transitions by providing detailed count
information.

Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
---
 drivers/ufs/host/ufs-qcom.c | 9 +++++++++
 drivers/ufs/host/ufs-qcom.h | 9 +++++++++
 2 files changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index a5a0646bb80a..4752311b1f76 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -1487,6 +1487,15 @@  static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
 
 	host = ufshcd_get_variant(hba);
 
+	dev_err(hba->dev, "HW_H8_ENTER_CNT=%d\n", ufshcd_readl(hba, REG_UFS_HW_H8_ENTER_CNT));
+	dev_err(hba->dev, "HW_H8_EXIT_CNT=%d\n", ufshcd_readl(hba, REG_UFS_HW_H8_EXIT_CNT));
+
+	dev_err(hba->dev, "SW_H8_ENTER_CNT=%d\n", ufshcd_readl(hba, REG_UFS_SW_H8_ENTER_CNT));
+	dev_err(hba->dev, "SW_H8_EXIT_CNT=%d\n", ufshcd_readl(hba, REG_UFS_SW_H8_EXIT_CNT));
+
+	dev_err(hba->dev, "SW_AFTER_HW_H8_ENTER_CNT=%d\n",
+			ufshcd_readl(hba, REG_UFS_SW_AFTER_HW_H8_ENTER_CNT));
+
 	ufshcd_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16 * 4,
 			 "HCI Vendor Specific Registers ");
 
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index b9de170983c9..84e42fa123d2 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -72,6 +72,15 @@  enum {
 	UFS_UFS_DBG_RD_EDTL_RAM			= 0x1900,
 };
 
+/* Vendor-specific Hibern8 count registers for the QCOM UFS host controller. */
+enum {
+	REG_UFS_HW_H8_ENTER_CNT			= 0x2700,
+	REG_UFS_SW_H8_ENTER_CNT			= 0x2704,
+	REG_UFS_SW_AFTER_HW_H8_ENTER_CNT	= 0x2708,
+	REG_UFS_HW_H8_EXIT_CNT			= 0x270C,
+	REG_UFS_SW_H8_EXIT_CNT			= 0x2710,
+};
+
 enum {
 	UFS_MEM_CQIS_VS		= 0x8,
 };