@@ -4811,20 +4811,14 @@ EXPORT_SYMBOL_GPL(ufshcd_make_hba_operational);
*/
void ufshcd_hba_stop(struct ufs_hba *hba)
{
- unsigned long flags;
int err;
- /*
- * Obtain the host lock to prevent that the controller is disabled
- * while the UFS interrupt handler is active on another CPU.
- */
- spin_lock_irqsave(hba->host->host_lock, flags);
+ ufshcd_disable_irq(hba);
ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE);
- spin_unlock_irqrestore(hba->host->host_lock, flags);
-
err = ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE,
CONTROLLER_ENABLE, CONTROLLER_DISABLE,
10, 1);
+ ufshcd_enable_irq(hba);
if (err)
dev_err(hba->dev, "%s: Controller disable failed\n", __func__);
}
This change is motivated by Bart's suggestion in [1], which enables to further reduce the scsi host lock usage in the ufs driver. The reason why it make sense, because although the legacy interrupt is disabled by some but not all ufshcd_hba_stop() callers, it is safe to nest disable_irq() calls as it checks the irq depth. [1] https://lore.kernel.org/linux-scsi/c58e4fce-0a74-4469-ad16-f1edbd670728@acm.org/ Suggested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Avri Altman <avri.altman@wdc.com> --- Changes compared to v1: - ensure that interrupts are only re-enabled after the controller has been fully disabled (Bart) --- drivers/ufs/core/ufshcd.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-)