diff mbox series

[05/10] lpfc: Add handling for LS_RJT reason explanation authentication required

Message ID 20241212233309.71356-6-justintee8345@gmail.com (mailing list archive)
State New
Headers show
Series Update lpfc to revision 14.4.0.7 | expand

Commit Message

Justin Tee Dec. 12, 2024, 11:33 p.m. UTC
When a LS_RJT is received with reason explanation authentication required,
current driver logic is to retry the PLOGI up to 48 times.  In the worse
case scenario, 48 retries can take longer than dev_loss_tmo and if there is
an RSCN received indicating an authentication requirement change, the
driver may miss processing it.  Fix by adding logic to specifically handle
reason explanation authentication required and set the max retry count to 8
times.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
---
 drivers/scsi/lpfc/lpfc_els.c | 26 ++++++++++++++++++++++++++
 drivers/scsi/lpfc/lpfc_hw.h  |  1 +
 2 files changed, 27 insertions(+)
diff mbox series

Patch

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 842b67e37f10..32e5e99ebbd4 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -4570,6 +4570,7 @@  lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	int link_reset = 0, rc;
 	u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
 	u32 ulp_word4 = get_job_word4(phba, rspiocb);
+	u8 rsn_code_exp = 0;
 
 
 	/* Note: cmd_dmabuf may be 0 for internal driver abort
@@ -4785,11 +4786,22 @@  lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			break;
 
 		case LSRJT_LOGICAL_BSY:
+			rsn_code_exp = stat.un.b.lsRjtRsnCodeExp;
 			if ((cmd == ELS_CMD_PLOGI) ||
 			    (cmd == ELS_CMD_PRLI) ||
 			    (cmd == ELS_CMD_NVMEPRLI)) {
 				delay = 1000;
 				maxretry = 48;
+
+				/* An authentication LS_RJT reason code
+				 * explanation means some error in the
+				 * security settings end-to-end.  Reduce
+				 * the retry count to allow lpfc to clear
+				 * RSCN mode and not race with dev_loss.
+				 */
+				if (cmd == ELS_CMD_PLOGI &&
+				    rsn_code_exp == LSEXP_AUTH_REQ)
+					maxretry = 8;
 			} else if (cmd == ELS_CMD_FDISC) {
 				/* FDISC retry policy */
 				maxretry = 48;
@@ -4818,6 +4830,20 @@  lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 					      "0820 FLOGI (x%x). "
 					      "BBCredit Not Supported\n",
 					      stat.un.lsRjtError);
+			} else if (cmd == ELS_CMD_PLOGI) {
+				rsn_code_exp = stat.un.b.lsRjtRsnCodeExp;
+
+				/* An authentication LS_RJT reason code
+				 * explanation means some error in the
+				 * security settings end-to-end.  Reduce
+				 * the retry count to allow lpfc to clear
+				 * RSCN mode and not race with dev_loss.
+				 */
+				if (rsn_code_exp == LSEXP_AUTH_REQ) {
+					delay = 1000;
+					retry = 1;
+					maxretry = 8;
+				}
 			}
 			break;
 
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index d5c15742f7f2..71d3e60f4b20 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -724,6 +724,7 @@  struct ls_rjt {	/* Structure is in Big Endian format */
 #define LSEXP_OUT_OF_RESOURCE   0x29
 #define LSEXP_CANT_GIVE_DATA    0x2A
 #define LSEXP_REQ_UNSUPPORTED   0x2C
+#define LSEXP_AUTH_REQ          0x48
 #define LSEXP_NO_RSRC_ASSIGN    0x52
 			uint8_t vendorUnique;	/* FC Word 0, bit  0: 7 */
 		} b;