| Message ID | 7b884263c9db9a9666086a345ede85bb56d9dfc7.1683872601.git.quic_nguyenb@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ufs: core: mcq: Add ufshcd_abort() and error handler support in MCQ mode | expand |
On 5/11/23 23:28, Bao D. Nguyen wrote: > @@ -6378,18 +6407,36 @@ static bool ufshcd_abort_all(struct ufs_hba *hba) > bool needs_reset = false; > int tag, ret; > > - /* Clear pending transfer requests */ > - for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) { > - ret = ufshcd_try_to_abort_task(hba, tag); > - dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, > - hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, > - ret ? "failed" : "succeeded"); > - if (ret) { > - needs_reset = true; > - goto out; > + if (is_mcq_enabled(hba)) { > + struct ufshcd_lrb *lrbp; > + int tag; > + > + for (tag = 0; tag < hba->nutrs; tag++) { > + lrbp = &hba->lrb[tag]; > + if (!ufshcd_cmd_inflight(lrbp->cmd)) > + continue; > + ret = ufshcd_try_to_abort_task(hba, tag); > + dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, > + hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, > + ret ? "failed" : "succeeded"); > + if (ret) { > + needs_reset = true; > + goto out; > + } > + } > + } else { > + /* Clear pending transfer requests */ > + for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) { > + ret = ufshcd_try_to_abort_task(hba, tag); > + dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, > + hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, > + ret ? "failed" : "succeeded"); > + if (ret) { > + needs_reset = true; > + goto out; > + } > } > } Please move the ufshcd_cmd_inflight() check into ufshcd_try_to_abort_task() such that the same code path can be used for MCQ and legacy mode. Thanks, Bart.
On 5/19/2023 4:03 PM, Bart Van Assche wrote: > On 5/11/23 23:28, Bao D. Nguyen wrote: >> @@ -6378,18 +6407,36 @@ static bool ufshcd_abort_all(struct ufs_hba *hba) >> bool needs_reset = false; >> int tag, ret; >> - /* Clear pending transfer requests */ >> - for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) { >> - ret = ufshcd_try_to_abort_task(hba, tag); >> - dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, >> - hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, >> - ret ? "failed" : "succeeded"); >> - if (ret) { >> - needs_reset = true; >> - goto out; >> + if (is_mcq_enabled(hba)) { >> + struct ufshcd_lrb *lrbp; >> + int tag; >> + >> + for (tag = 0; tag < hba->nutrs; tag++) { >> + lrbp = &hba->lrb[tag]; >> + if (!ufshcd_cmd_inflight(lrbp->cmd)) >> + continue; >> + ret = ufshcd_try_to_abort_task(hba, tag); >> + dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, >> + hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, >> + ret ? "failed" : "succeeded"); >> + if (ret) { >> + needs_reset = true; >> + goto out; >> + } >> + } >> + } else { >> + /* Clear pending transfer requests */ >> + for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) { >> + ret = ufshcd_try_to_abort_task(hba, tag); >> + dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, >> + hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, >> + ret ? "failed" : "succeeded"); >> + if (ret) { >> + needs_reset = true; >> + goto out; >> + } >> } >> } > > Please move the ufshcd_cmd_inflight() check into ufshcd_try_to_abort_task() > such that the same code path can be used for MCQ and legacy mode. Thank you, Bart. I will make the change. Thanks Bao > > Thanks, > > Bart.
Hi Bao, Bao D. Nguyen <quic_nguyenb@quicinc.com> 於 2023年5月12日 週五 下午2:34寫道： > > Add support for error handling for MCQ mode. > > Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> > --- > drivers/ufs/core/ufshcd.c | 85 +++++++++++++++++++++++++++++++++++++++++------ > 1 file changed, 74 insertions(+), 11 deletions(-) > > diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c > index ec07e49..9345118 100644 > --- a/drivers/ufs/core/ufshcd.c > +++ b/drivers/ufs/core/ufshcd.c > @@ -3148,6 +3148,16 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, > err = -ETIMEDOUT; > dev_dbg(hba->dev, "%s: dev_cmd request timedout, tag %d\n", > __func__, lrbp->task_tag); > + > + /* MCQ mode */ > + if (is_mcq_enabled(hba)) { > + err = ufshcd_clear_cmd(hba, lrbp->task_tag); > + if (!err) > + hba->dev_cmd.complete = NULL; How about always clearing hba->dev_cmd.complete? If ufshcd_clear_cmd() fails (for example, times out), "complete" should be cleared, similar to the "pending" case in the SDB path. > + return err; > + } > + > + /* SDB mode */ > if (ufshcd_clear_cmd(hba, lrbp->task_tag) == 0) { > /* successfully cleared the command, retry if needed */ > err = -EAGAIN; > @@ -5581,6 +5591,10 @@ static int ufshcd_poll(struct Scsi_Host *shost, unsigned int queue_num) > */ > static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba) > { > + struct ufshcd_lrb *lrbp; > + u32 hwq_num, utag; > + int tag; > + > /* Resetting interrupt aggregation counters first and reading the > * DOOR_BELL afterward allows us to handle all the completed requests. > * In order to prevent other interrupts starvation the DB is read once > @@ -5599,7 +5613,22 @@ static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba) > * Ignore the ufshcd_poll() return value and return IRQ_HANDLED since we > * do not want polling to trigger spurious interrupt complaints. > */ > - ufshcd_poll(hba->host, UFSHCD_POLL_FROM_INTERRUPT_CONTEXT); > + if (!is_mcq_enabled(hba)) { > + ufshcd_poll(hba->host, UFSHCD_POLL_FROM_INTERRUPT_CONTEXT); > + goto out; > + } > + > + /* MCQ mode */ > + for (tag = 0; tag < hba->nutrs; tag++) { > + lrbp = &hba->lrb[tag]; > + if (ufshcd_cmd_inflight(lrbp->cmd)) { > + utag = blk_mq_unique_tag(scsi_cmd_to_rq(lrbp->cmd)); > + hwq_num = blk_mq_unique_tag_to_hwq(utag); > + ufshcd_poll(hba->host, hwq_num); > + } > + } In SDB mode, the DOOR_BELL is reset by ufshcd_hba_stop(). All bits that were previously set in DOOR_BELL are also set in "completed_reqs" in ufshcd_poll(). This allows ufshcd_poll() to handle all outstanding requests properly. However, in MCQ mode, the CQ tail registers cannot provide the same information after they are reset. Hence, they cannot be properly referenced by ufshcd_poll(). Thanks, Stanley Chu
On Mon, May 22, 2023 at 2:48 PM Stanley Chu <chu.stanley@gmail.com> wrote: > > Hi Bao, > > Bao D. Nguyen <quic_nguyenb@quicinc.com> 於 2023年5月12日 週五 下午2:34寫道： > > > > Add support for error handling for MCQ mode. > > > > Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> > > --- > > drivers/ufs/core/ufshcd.c | 85 +++++++++++++++++++++++++++++++++++++++++------ > > 1 file changed, 74 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c > > index ec07e49..9345118 100644 > > --- a/drivers/ufs/core/ufshcd.c > > +++ b/drivers/ufs/core/ufshcd.c > > @@ -3148,6 +3148,16 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, > > err = -ETIMEDOUT; > > dev_dbg(hba->dev, "%s: dev_cmd request timedout, tag %d\n", > > __func__, lrbp->task_tag); > > + > > + /* MCQ mode */ > > + if (is_mcq_enabled(hba)) { > > + err = ufshcd_clear_cmd(hba, lrbp->task_tag); > > + if (!err) > > + hba->dev_cmd.complete = NULL; > > How about always clearing hba->dev_cmd.complete? If ufshcd_clear_cmd() > fails (for example, times out), "complete" should be cleared, similar > to the "pending" case in the SDB path. > > > + return err; > > + } > > + > > + /* SDB mode */ > > if (ufshcd_clear_cmd(hba, lrbp->task_tag) == 0) { > > /* successfully cleared the command, retry if needed */ > > err = -EAGAIN; > > @@ -5581,6 +5591,10 @@ static int ufshcd_poll(struct Scsi_Host *shost, unsigned int queue_num) > > */ > > static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba) > > { > > + struct ufshcd_lrb *lrbp; > > + u32 hwq_num, utag; > > + int tag; > > + > > /* Resetting interrupt aggregation counters first and reading the > > * DOOR_BELL afterward allows us to handle all the completed requests. > > * In order to prevent other interrupts starvation the DB is read once > > @@ -5599,7 +5613,22 @@ static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba) > > * Ignore the ufshcd_poll() return value and return IRQ_HANDLED since we > > * do not want polling to trigger spurious interrupt complaints. > > */ > > - ufshcd_poll(hba->host, UFSHCD_POLL_FROM_INTERRUPT_CONTEXT); > > + if (!is_mcq_enabled(hba)) { > > + ufshcd_poll(hba->host, UFSHCD_POLL_FROM_INTERRUPT_CONTEXT); > > + goto out; > > + } > > + > > + /* MCQ mode */ > > + for (tag = 0; tag < hba->nutrs; tag++) { > > + lrbp = &hba->lrb[tag]; > > + if (ufshcd_cmd_inflight(lrbp->cmd)) { > > + utag = blk_mq_unique_tag(scsi_cmd_to_rq(lrbp->cmd)); > > + hwq_num = blk_mq_unique_tag_to_hwq(utag); > > + ufshcd_poll(hba->host, hwq_num); > > + } > > + } > > In SDB mode, the DOOR_BELL is reset by ufshcd_hba_stop(). All bits > that were previously set in DOOR_BELL are also set in "completed_reqs" > in ufshcd_poll(). This allows ufshcd_poll() to handle all outstanding > requests properly. > > However, in MCQ mode, the CQ tail registers cannot provide the same > information after they are reset. Hence, they cannot be properly > referenced by ufshcd_poll(). A fixed version sample is as follows and has been tested on our end. struct scsi_cmnd *cmd; for (tag = 0; tag < hba->nutrs; tag++) { lrbp = &hba->lrb[tag]; cmd = lrbp->cmd; if (ufshcd_cmd_inflight(cmd)) { set_host_byte(cmd, DID_ERROR); ufshcd_release_scsi_cmd(hba, lrbp); scsi_done(cmd); } } Thanks, Stanley Chu
On 5/19/2023 4:03 PM, Bart Van Assche wrote: > On 5/11/23 23:28, Bao D. Nguyen wrote: >> @@ -6378,18 +6407,36 @@ static bool ufshcd_abort_all(struct ufs_hba *hba) >> bool needs_reset = false; >> int tag, ret; >> - /* Clear pending transfer requests */ >> - for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) { >> - ret = ufshcd_try_to_abort_task(hba, tag); >> - dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, >> - hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, >> - ret ? "failed" : "succeeded"); >> - if (ret) { >> - needs_reset = true; >> - goto out; >> + if (is_mcq_enabled(hba)) { >> + struct ufshcd_lrb *lrbp; >> + int tag; >> + >> + for (tag = 0; tag < hba->nutrs; tag++) { >> + lrbp = &hba->lrb[tag]; >> + if (!ufshcd_cmd_inflight(lrbp->cmd)) >> + continue; >> + ret = ufshcd_try_to_abort_task(hba, tag); >> + dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, >> + hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, >> + ret ? "failed" : "succeeded"); >> + if (ret) { >> + needs_reset = true; >> + goto out; >> + } >> + } >> + } else { >> + /* Clear pending transfer requests */ >> + for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) { >> + ret = ufshcd_try_to_abort_task(hba, tag); >> + dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, >> + hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, >> + ret ? "failed" : "succeeded"); >> + if (ret) { >> + needs_reset = true; >> + goto out; >> + } >> } >> } > > Please move the ufshcd_cmd_inflight() check into ufshcd_try_to_abort_task() > such that the same code path can be used for MCQ and legacy mode. Hi Bart, Because the ufshcd_try_to_abort_task() is shared by sdb and mcq modes, I feel a bit uncomfortable using the new function ufshcd_cmd_inflight() in ufshcd_try_to_abort_task(). In this patch series, I am trying to avoid changing the sdb error handling logic as much as possible; only add error handling support for mcq mode. If you feel there is a very good benefit in making the change, I would give it a try. Otherwise, I would prefer not touching sdb error handling code that has been working well. Please let me know. Thanks, Bao > > Thanks, > > Bart.
On 5/21/2023 11:56 PM, Stanley Chu wrote: > On Mon, May 22, 2023 at 2:48 PM Stanley Chu <chu.stanley@gmail.com> wrote: >> >> Hi Bao, >> >> Bao D. Nguyen <quic_nguyenb@quicinc.com> 於 2023年5月12日 週五 下午2:34寫道： >>> >>> Add support for error handling for MCQ mode. >>> >>> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> >>> --- >>> drivers/ufs/core/ufshcd.c | 85 +++++++++++++++++++++++++++++++++++++++++------ >>> 1 file changed, 74 insertions(+), 11 deletions(-) >>> >>> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c >>> index ec07e49..9345118 100644 >>> --- a/drivers/ufs/core/ufshcd.c >>> +++ b/drivers/ufs/core/ufshcd.c >>> @@ -3148,6 +3148,16 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, >>> err = -ETIMEDOUT; >>> dev_dbg(hba->dev, "%s: dev_cmd request timedout, tag %d\n", >>> __func__, lrbp->task_tag); >>> + >>> + /* MCQ mode */ >>> + if (is_mcq_enabled(hba)) { >>> + err = ufshcd_clear_cmd(hba, lrbp->task_tag); >>> + if (!err) >>> + hba->dev_cmd.complete = NULL; >> >> How about always clearing hba->dev_cmd.complete? If ufshcd_clear_cmd() >> fails (for example, times out), "complete" should be cleared, similar >> to the "pending" case in the SDB path. >> >>> + return err; >>> + } >>> + >>> + /* SDB mode */ >>> if (ufshcd_clear_cmd(hba, lrbp->task_tag) == 0) { >>> /* successfully cleared the command, retry if needed */ >>> err = -EAGAIN; >>> @@ -5581,6 +5591,10 @@ static int ufshcd_poll(struct Scsi_Host *shost, unsigned int queue_num) >>> */ >>> static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba) >>> { >>> + struct ufshcd_lrb *lrbp; >>> + u32 hwq_num, utag; >>> + int tag; >>> + >>> /* Resetting interrupt aggregation counters first and reading the >>> * DOOR_BELL afterward allows us to handle all the completed requests. >>> * In order to prevent other interrupts starvation the DB is read once >>> @@ -5599,7 +5613,22 @@ static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba) >>> * Ignore the ufshcd_poll() return value and return IRQ_HANDLED since we >>> * do not want polling to trigger spurious interrupt complaints. >>> */ >>> - ufshcd_poll(hba->host, UFSHCD_POLL_FROM_INTERRUPT_CONTEXT); >>> + if (!is_mcq_enabled(hba)) { >>> + ufshcd_poll(hba->host, UFSHCD_POLL_FROM_INTERRUPT_CONTEXT); >>> + goto out; >>> + } >>> + >>> + /* MCQ mode */ >>> + for (tag = 0; tag < hba->nutrs; tag++) { >>> + lrbp = &hba->lrb[tag]; >>> + if (ufshcd_cmd_inflight(lrbp->cmd)) { >>> + utag = blk_mq_unique_tag(scsi_cmd_to_rq(lrbp->cmd)); >>> + hwq_num = blk_mq_unique_tag_to_hwq(utag); >>> + ufshcd_poll(hba->host, hwq_num); >>> + } >>> + } >> >> In SDB mode, the DOOR_BELL is reset by ufshcd_hba_stop(). All bits >> that were previously set in DOOR_BELL are also set in "completed_reqs" >> in ufshcd_poll(). This allows ufshcd_poll() to handle all outstanding >> requests properly. >> >> However, in MCQ mode, the CQ tail registers cannot provide the same >> information after they are reset. Hence, they cannot be properly >> referenced by ufshcd_poll(). > > A fixed version sample is as follows and has been tested on our end. Thank you Stanley. I will make the change. > > struct scsi_cmnd *cmd; > > for (tag = 0; tag < hba->nutrs; tag++) { > lrbp = &hba->lrb[tag]; > cmd = lrbp->cmd; > if (ufshcd_cmd_inflight(cmd)) { > set_host_byte(cmd, DID_ERROR); > ufshcd_release_scsi_cmd(hba, lrbp); > scsi_done(cmd); > } > } > > Thanks, > Stanley Chu
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index ec07e49..9345118 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -3148,6 +3148,16 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, err = -ETIMEDOUT; dev_dbg(hba->dev, "%s: dev_cmd request timedout, tag %d\n", __func__, lrbp->task_tag); + + /* MCQ mode */ + if (is_mcq_enabled(hba)) { + err = ufshcd_clear_cmd(hba, lrbp->task_tag); + if (!err) + hba->dev_cmd.complete = NULL; + return err; + } + + /* SDB mode */ if (ufshcd_clear_cmd(hba, lrbp->task_tag) == 0) { /* successfully cleared the command, retry if needed */ err = -EAGAIN; @@ -5581,6 +5591,10 @@ static int ufshcd_poll(struct Scsi_Host *shost, unsigned int queue_num) */ static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba) { + struct ufshcd_lrb *lrbp; + u32 hwq_num, utag; + int tag; + /* Resetting interrupt aggregation counters first and reading the * DOOR_BELL afterward allows us to handle all the completed requests. * In order to prevent other interrupts starvation the DB is read once @@ -5599,7 +5613,22 @@ static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba) * Ignore the ufshcd_poll() return value and return IRQ_HANDLED since we * do not want polling to trigger spurious interrupt complaints. */ - ufshcd_poll(hba->host, UFSHCD_POLL_FROM_INTERRUPT_CONTEXT); + if (!is_mcq_enabled(hba)) { + ufshcd_poll(hba->host, UFSHCD_POLL_FROM_INTERRUPT_CONTEXT); + goto out; + } + + /* MCQ mode */ + for (tag = 0; tag < hba->nutrs; tag++) { + lrbp = &hba->lrb[tag]; + if (ufshcd_cmd_inflight(lrbp->cmd)) { + utag = blk_mq_unique_tag(scsi_cmd_to_rq(lrbp->cmd)); + hwq_num = blk_mq_unique_tag_to_hwq(utag); + ufshcd_poll(hba->host, hwq_num); + } + } + +out: return IRQ_HANDLED; } @@ -6378,18 +6407,36 @@ static bool ufshcd_abort_all(struct ufs_hba *hba) bool needs_reset = false; int tag, ret; - /* Clear pending transfer requests */ - for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) { - ret = ufshcd_try_to_abort_task(hba, tag); - dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, - hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, - ret ? "failed" : "succeeded"); - if (ret) { - needs_reset = true; - goto out; + if (is_mcq_enabled(hba)) { + struct ufshcd_lrb *lrbp; + int tag; + + for (tag = 0; tag < hba->nutrs; tag++) { + lrbp = &hba->lrb[tag]; + if (!ufshcd_cmd_inflight(lrbp->cmd)) + continue; + ret = ufshcd_try_to_abort_task(hba, tag); + dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, + hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, + ret ? "failed" : "succeeded"); + if (ret) { + needs_reset = true; + goto out; + } + } + } else { + /* Clear pending transfer requests */ + for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) { + ret = ufshcd_try_to_abort_task(hba, tag); + dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, + hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, + ret ? "failed" : "succeeded"); + if (ret) { + needs_reset = true; + goto out; + } } } - /* Clear pending task management requests */ for_each_set_bit(tag, &hba->outstanding_tasks, hba->nutmrs) { if (ufshcd_clear_tm_cmd(hba, tag)) { @@ -7321,6 +7368,8 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) unsigned long flags, pending_reqs = 0, not_cleared = 0; struct Scsi_Host *host; struct ufs_hba *hba; + struct ufs_hw_queue *hwq; + struct ufshcd_lrb *lrbp; u32 pos, not_cleared_mask = 0; int err; u8 resp = 0xF, lun; @@ -7336,6 +7385,20 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) goto out; } + if (is_mcq_enabled(hba)) { + for (pos = 0; pos < hba->nutrs; pos++) { + lrbp = &hba->lrb[pos]; + if (ufshcd_cmd_inflight(lrbp->cmd) && + lrbp->lun == lun) { + ufshcd_clear_cmd(hba, pos); + hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(lrbp->cmd)); + ufshcd_mcq_poll_cqe_lock(hba, hwq); + } + } + err = 0; + goto out; + } + /* clear the commands that were pending for corresponding LUN */ spin_lock_irqsave(&hba->outstanding_lock, flags); for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs)
Add support for error handling for MCQ mode. Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> --- drivers/ufs/core/ufshcd.c | 85 +++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 74 insertions(+), 11 deletions(-)