new file mode 100644
@@ -0,0 +1,26 @@
+* Universal Flash Storage (UFS) DesignWare Host Controller
+
+DWC_UFS nodes are defined to describe on-chip UFS host controllers and MPHY.
+Each UFS controller instance should have its own node.
+
+Required properties:
+- compatible : compatible list must contain the PHY type & version:
+ "snps, g210-tc-6.00-20bit"
+ "snps, g210-tc-6.00-40bit"
+ complemented with the Controller IP version:
+ "snps, dwc-ufshcd-1.40a"
+ complemented with the JEDEC version:
+ "jedec,ufs-1.1"
+ "jedec,ufs-2.0"
+
+- reg : <registers mapping>
+- interrupts : <interrupt mapping for UFS host controller IRQ>
+
+Example for a setup using a 1.40a DWC Controller with a 6.00 G210 40-bit TC:
+ dwc_ufs@d0000000 {
+ compatible = "snps, g210-tc-6.00-40bit",
+ "snps, dwc-ufshcd-1.40a",
+ "jedec,ufs-2.0";
+ reg = < 0xd0000000 0x10000 >;
+ interrupts = < 24 >;
+ };
@@ -90,3 +90,12 @@ config SCSI_UFS_DWC
config SCSI_UFS_DWC_TC
bool
select SCSI_UFS_DWC
+
+config SCSI_UFS_DWC_TC_PLATFORM
+ tristate "DesignWare platform support using a G210 Test Chip"
+ depends on SCSI_UFSHCD_PLATFORM
+ select SCSI_UFS_DWC_TC
+ ---help---
+ Synopsys Test Chip is a PHY for prototyping purposes.
+
+ If unsure, say N."
@@ -1,6 +1,7 @@
# UFSHCD makefile
obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o
obj-$(CONFIG_SCSI_UFS_DWC_TC) += tc-dwc-g210.o
+obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o
obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
new file mode 100644
@@ -0,0 +1,109 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+
+#include "ufshcd-pltfrm.h"
+#include "ufshcd-dwc.h"
+#include "tc-dwc-g210.h"
+
+/**
+ * struct ufs_hba_dwc_vops - UFS DWC specific variant operations
+ */
+static struct ufs_hba_variant_ops tc_dwc_g210_pltfm_hba_vops = {
+ .name = "tc-dwc-g210-pltfm",
+ .link_startup_notify = ufshcd_dwc_link_startup_notify,
+};
+
+/**
+ * tc_dwc_g210_pltfm_probe()
+ * @pdev: pointer to platform device structure
+ *
+ */
+static int tc_dwc_g210_pltfm_probe(struct platform_device *pdev)
+{
+ int err;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+
+ /* Check Test Chip type and set the specific setup routine */
+ if (of_device_is_compatible(np, "snps, g210-tc-6.00-20bit")) {
+ tc_dwc_g210_pltfm_hba_vops.custom_phy_initialization =
+ tc_dwc_g210_config_20_bit;
+ } else if (of_device_is_compatible(np, "snps, g210-tc-6.00-40bit")) {
+ tc_dwc_g210_pltfm_hba_vops.custom_phy_initialization =
+ tc_dwc_g210_config_40_bit;
+ }
+
+ /* Perform generic probe */
+ err = ufshcd_pltfrm_init(pdev, &tc_dwc_g210_pltfm_hba_vops);
+ if (err)
+ dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
+
+ return err;
+}
+
+/**
+ * tc_dwc_g210_pltfm_remove()
+ * @pdev: pointer to platform device structure
+ *
+ */
+static int tc_dwc_g210_pltfm_remove(struct platform_device *pdev)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(&(pdev)->dev);
+ ufshcd_remove(hba);
+
+ return 0;
+}
+
+static const struct of_device_id tc_dwc_g210_pltfm_match[] = {
+ {
+ .compatible = "snps, g210-tc-6.00-20bit"
+ },
+ {
+ .compatible = "snps, g210-tc-6.00-40bit"
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tc_dwc_g210_pltfm_match);
+
+static const struct dev_pm_ops tc_dwc_g210_pltfm_pm_ops = {
+ .suspend = ufshcd_pltfrm_suspend,
+ .resume = ufshcd_pltfrm_resume,
+ .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+ .runtime_resume = ufshcd_pltfrm_runtime_resume,
+ .runtime_idle = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver tc_dwc_g210_pltfm_driver = {
+ .probe = tc_dwc_g210_pltfm_probe,
+ .remove = tc_dwc_g210_pltfm_remove,
+ .shutdown = ufshcd_pltfrm_shutdown,
+ .driver = {
+ .name = "tc-dwc-g210-pltfm",
+ .pm = &tc_dwc_g210_pltfm_pm_ops,
+ .of_match_table = of_match_ptr(tc_dwc_g210_pltfm_match),
+ },
+};
+
+module_platform_driver(tc_dwc_g210_pltfm_driver);
+
+MODULE_ALIAS("platform:tc-dwc-g210-pltfm");
+MODULE_DESCRIPTION("Synopsys Test Chip G210 platform glue driver");
+MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
+MODULE_LICENSE("Dual BSD/GPL");
This patch adds a glue platform driver for the Synopsys G210 Test Chip. Signed-off-by: Joao Pinto <jpinto@synopsys.com> --- Changes v0->v10: - This patch only appeared in v10 .../devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt | 26 +++++ drivers/scsi/ufs/Kconfig | 9 ++ drivers/scsi/ufs/Makefile | 1 + drivers/scsi/ufs/tc-dwc-g210-pltfrm.c | 109 +++++++++++++++++++++ 4 files changed, 145 insertions(+) create mode 100644 Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c