@@ -1369,7 +1369,7 @@ el3_resume(struct device *pdev)
#endif /* CONFIG_PM */
module_param(debug,int, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param(max_interrupt_work, int, 0);
MODULE_PARM_DESC(debug, "debug level (0-6)");
MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
@@ -813,8 +813,8 @@ module_param(global_enable_wol, int, 0);
module_param_array(enable_wol, int, NULL, 0);
module_param(rx_copybreak, int, 0);
module_param(max_interrupt_work, int, 0);
-module_param(compaq_ioaddr, int, 0);
-module_param(compaq_irq, int, 0);
+module_param_hw(compaq_ioaddr, int, ioport, 0);
+module_param_hw(compaq_irq, int, irq, 0);
module_param(compaq_device_id, int, 0);
module_param(watchdog, int, 0);
module_param(global_use_mmio, int, 0);
@@ -74,8 +74,8 @@ static int bad[MAX_NE_CARDS];
static u32 ne_msg_enable;
#ifdef MODULE
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param_array(bad, int, NULL, 0);
module_param_named(msg_enable, ne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH));
MODULE_PARM_DESC(io, "I/O base address(es),required");
@@ -562,8 +562,8 @@ static struct net_device *dev_ultra[MAX_ULTRA_CARDS];
static int io[MAX_ULTRA_CARDS];
static int irq[MAX_ULTRA_CARDS];
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param_named(msg_enable, ultra_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH));
MODULE_PARM_DESC(io, "I/O base address(es)");
MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
@@ -504,10 +504,10 @@ static int irq[MAX_WD_CARDS];
static int mem[MAX_WD_CARDS];
static int mem_end[MAX_WD_CARDS]; /* for non std. mem size */
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(mem, int, NULL, 0);
-module_param_array(mem_end, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
+module_param_hw_array(mem, int, iomem, NULL, 0);
+module_param_hw_array(mem_end, int, iomem, NULL, 0);
module_param_named(msg_enable, wd_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH));
MODULE_PARM_DESC(io, "I/O base address(es)");
MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)");
@@ -318,9 +318,9 @@ static int io[MAX_CARDS];
static int dma[MAX_CARDS];
static int irq[MAX_CARDS];
-module_param_array(io, int, NULL, 0);
-module_param_array(dma, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(dma, int, dma, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param(lance_debug, int, 0);
MODULE_PARM_DESC(io, "LANCE/PCnet I/O base address(es),required");
MODULE_PARM_DESC(dma, "LANCE/PCnet ISA DMA channel (ignored for some devices)");
@@ -1228,9 +1228,9 @@ static void set_multicast_list(struct net_device *dev)
#ifdef MODULE
static struct net_device *dev_ni65;
-module_param(irq, int, 0);
-module_param(io, int, 0);
-module_param(dma, int, 0);
+module_param_hw(irq, int, irq, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(dma, int, dma, 0);
MODULE_PARM_DESC(irq, "ni6510 IRQ number (ignored for some cards)");
MODULE_PARM_DESC(io, "ni6510 I/O base address");
MODULE_PARM_DESC(dma, "ni6510 ISA DMA channel (ignored for some cards)");
@@ -1705,12 +1705,12 @@ static int use_dma; /* These generate unused var warnings if ALLOW_DMA = 0 */
static int dma;
static int dmasize = 16; /* or 64 */
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
module_param(debug, int, 0);
module_param_string(media, media, sizeof(media), 0);
module_param(duplex, int, 0);
-module_param(dma , int, 0);
+module_param_hw(dma , int, dma, 0);
module_param(dmasize , int, 0);
module_param(use_dma , int, 0);
MODULE_PARM_DESC(io, "cs89x0 I/O base address");
@@ -1015,7 +1015,7 @@ static int compact_infoblock(struct net_device *dev, u_char count, u_char *p
static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED */
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
module_param(de4x5_debug, int, 0);
module_param(dec_only, int, 0);
module_param(args, charp, 0);
@@ -2968,7 +2968,7 @@ MODULE_DESCRIPTION("HP CASCADE Architecture Driver for 100VG-AnyLan Network Adap
#define HP100_DEVICES 5
/* Parameters set by insmod */
static int hp100_port[HP100_DEVICES] = { 0, [1 ... (HP100_DEVICES-1)] = -1 };
-module_param_array(hp100_port, int, NULL, 0);
+module_param_hw_array(hp100_port, int, ioport, NULL, 0);
/* List of devices */
static struct net_device *hp100_devlist[HP100_DEVICES];
@@ -151,8 +151,8 @@ MODULE_LICENSE("GPL");
module_param(max_interrupt_work, int, 0);
module_param(debug, int, 0);
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param_array(xcvr, int, NULL, 0);
MODULE_PARM_DESC(max_interrupt_work, "ATP maximum events handled per interrupt");
MODULE_PARM_DESC(debug, "ATP debug level (0-7)");
@@ -1502,8 +1502,8 @@ static void smc_set_multicast_list(struct net_device *dev)
static struct net_device *devSMC9194;
MODULE_LICENSE("GPL");
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
module_param(ifport, int, 0);
MODULE_PARM_DESC(io, "SMC 99194 I/O base address");
MODULE_PARM_DESC(irq, "SMC 99194 IRQ number");
When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in drivers/net/ethernet/. Suggested-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> cc: Jaroslav Kysela <perex@perex.cz> cc: netdev@vger.kernel.org cc: linux-parisc@vger.kernel.org --- drivers/net/ethernet/3com/3c509.c | 2 +- drivers/net/ethernet/3com/3c59x.c | 4 ++-- drivers/net/ethernet/8390/ne.c | 4 ++-- drivers/net/ethernet/8390/smc-ultra.c | 4 ++-- drivers/net/ethernet/8390/wd.c | 8 ++++---- drivers/net/ethernet/amd/lance.c | 6 +++--- drivers/net/ethernet/amd/ni65.c | 6 +++--- drivers/net/ethernet/cirrus/cs89x0.c | 6 +++--- drivers/net/ethernet/dec/tulip/de4x5.c | 2 +- drivers/net/ethernet/hp/hp100.c | 2 +- drivers/net/ethernet/realtek/atp.c | 4 ++-- drivers/net/ethernet/smsc/smc9194.c | 4 ++-- 12 files changed, 26 insertions(+), 26 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-security-module" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html