| Message ID | 20250314033040.3190642-1-chiang.brian@inventec.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v5] hwmon: (pmbus/tps53679) Add support for TPS53685 | expand |
On 3/13/25 20:30, Chiang Brian wrote: > The TPS53685 is a fully AMD SVI3 compliant step down > controller with trans-inductor voltage regulator > (TLVR) topology support, dual channels, built-in > non-volatile memory (NVM), PMBus interface, and > full compatible with TI NexFET smart power > stages. > Add support for it to the tps53679 driver. > > Signed-off-by: Chiang Brian <chiang.brian@inventec.com> > --- > v4 -> V5: > 1. document the compatible of tps53685 into dt-bindings > 2. add the buffer length as argument for %*ph > 3. Add Changelog > v3 -> V4: > 1. Add length comparison into the comparison of "id",or it may be true when > the substring of "id" matches device id. > 2. Restore `return 0;` in `tps53679_identify_chip()` > V2 -> V3: > 1. Remove the length comparsion in the comparison of "id". > V1 -> V2: > 1. Modify subject and description to meet requirements > 2. Add "tps53685" into enum chips with numeric order > 3. Modify the content of marco "TPS53681_DEVICE_ID" from 0x81 to "\x81" > Add marco "TPS53685_DEVICE_ID" with content "TIShP" > 4. Modify the type of "id" from u16 to char* in `tps53679_identify_chip()` > 5. Modify the comparison of "id". It will be true if the string "id" matches > device ID and compare with type char*, > 6. Add the length comparsion into the comparison of "id". > 7. Modify "len" as return code in `tps53679_identify_chip()` > 8. Output device error log with %*ph, instead of 0x%x\n" > 9. Use existing tps53679_identify_multiphase() with argument > "TPS53685_DEVICE_ID" in tps53685_identify() rather than creating one > tps53685_identify_multiphase() > > boot-log: This is completely useless noise. > > drivers/hwmon/pmbus/tps53679.c | 29 +++++++++++++++++++++++------ > 1 file changed, 23 insertions(+), 6 deletions(-) > > diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c > index 63524dff5e75..091d5eacbee0 100644 > --- a/drivers/hwmon/pmbus/tps53679.c > +++ b/drivers/hwmon/pmbus/tps53679.c > @@ -16,7 +16,7 @@ > #include "pmbus.h" > > enum chips { > - tps53647, tps53667, tps53676, tps53679, tps53681, tps53688 > + tps53647, tps53667, tps53676, tps53679, tps53681, tps53685, tps53688 > }; > > #define TPS53647_PAGE_NUM 1 > @@ -31,7 +31,8 @@ enum chips { > #define TPS53679_PROT_VR13_5MV 0x07 /* VR13.0 mode, 5-mV DAC */ > #define TPS53679_PAGE_NUM 2 > > -#define TPS53681_DEVICE_ID 0x81 > +#define TPS53681_DEVICE_ID "\x81" > +#define TPS53685_DEVICE_ID "TIShP" > > #define TPS53681_PMBUS_REVISION 0x33 > > @@ -86,7 +87,7 @@ static int tps53679_identify_phases(struct i2c_client *client, > } > > static int tps53679_identify_chip(struct i2c_client *client, > - u8 revision, u16 id) > + u8 revision, char *id) > { > u8 buf[I2C_SMBUS_BLOCK_MAX]; > int ret; > @@ -102,8 +103,8 @@ static int tps53679_identify_chip(struct i2c_client *client, > ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf); > if (ret < 0) > return ret; > - if (ret != 1 || buf[0] != id) { > - dev_err(&client->dev, "Unexpected device ID 0x%x\n", buf[0]); > + if (ret != strlen(id) || strncmp(id, buf, ret)) { > + dev_err(&client->dev, "Unexpected device ID: %*ph\n", ret, buf); > return -ENODEV; > } > return 0; > @@ -138,6 +139,14 @@ static int tps53679_identify(struct i2c_client *client, > return tps53679_identify_mode(client, info); > } > > +static int tps53685_identify(struct i2c_client *client, > + struct pmbus_driver_info *info) > +{ > + info->format[PSC_VOLTAGE_OUT] = linear; > + return tps53679_identify_chip(client, TPS53681_PMBUS_REVISION, > + TPS53685_DEVICE_ID); > +} > + > static int tps53681_identify(struct i2c_client *client, > struct pmbus_driver_info *info) > { > @@ -215,7 +224,9 @@ static struct pmbus_driver_info tps53679_info = { > PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | > PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | > PMBUS_HAVE_POUT, > - .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | > + .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | > + PMBUS_HAVE_STATUS_INPUT | > + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | This changes the attributes supported for the other chips supported by this driver. If those chips indeed support the additional attributes, the change should be submitted as separate patch. Otherwise, please explain how the change is supposed to work for those chips (and why you don't add the additional flags after determining that the chip is a tps53685 and after copying the data structure). Guenter
diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c index 63524dff5e75..091d5eacbee0 100644 --- a/drivers/hwmon/pmbus/tps53679.c +++ b/drivers/hwmon/pmbus/tps53679.c @@ -16,7 +16,7 @@ #include "pmbus.h" enum chips { - tps53647, tps53667, tps53676, tps53679, tps53681, tps53688 + tps53647, tps53667, tps53676, tps53679, tps53681, tps53685, tps53688 }; #define TPS53647_PAGE_NUM 1 @@ -31,7 +31,8 @@ enum chips { #define TPS53679_PROT_VR13_5MV 0x07 /* VR13.0 mode, 5-mV DAC */ #define TPS53679_PAGE_NUM 2 -#define TPS53681_DEVICE_ID 0x81 +#define TPS53681_DEVICE_ID "\x81" +#define TPS53685_DEVICE_ID "TIShP" #define TPS53681_PMBUS_REVISION 0x33 @@ -86,7 +87,7 @@ static int tps53679_identify_phases(struct i2c_client *client, } static int tps53679_identify_chip(struct i2c_client *client, - u8 revision, u16 id) + u8 revision, char *id) { u8 buf[I2C_SMBUS_BLOCK_MAX]; int ret; @@ -102,8 +103,8 @@ static int tps53679_identify_chip(struct i2c_client *client, ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf); if (ret < 0) return ret; - if (ret != 1 || buf[0] != id) { - dev_err(&client->dev, "Unexpected device ID 0x%x\n", buf[0]); + if (ret != strlen(id) || strncmp(id, buf, ret)) { + dev_err(&client->dev, "Unexpected device ID: %*ph\n", ret, buf); return -ENODEV; } return 0; @@ -138,6 +139,14 @@ static int tps53679_identify(struct i2c_client *client, return tps53679_identify_mode(client, info); } +static int tps53685_identify(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + info->format[PSC_VOLTAGE_OUT] = linear; + return tps53679_identify_chip(client, TPS53681_PMBUS_REVISION, + TPS53685_DEVICE_ID); +} + static int tps53681_identify(struct i2c_client *client, struct pmbus_driver_info *info) { @@ -215,7 +224,9 @@ static struct pmbus_driver_info tps53679_info = { PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT, - .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | + PMBUS_HAVE_STATUS_INPUT | + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT, @@ -263,6 +274,10 @@ static int tps53679_probe(struct i2c_client *client) info->identify = tps53681_identify; info->read_word_data = tps53681_read_word_data; break; + case tps53685: + info->pages = TPS53679_PAGE_NUM; + info->identify = tps53685_identify; + break; default: return -ENODEV; } @@ -277,6 +292,7 @@ static const struct i2c_device_id tps53679_id[] = { {"tps53676", tps53676}, {"tps53679", tps53679}, {"tps53681", tps53681}, + {"tps53685", tps53685}, {"tps53688", tps53688}, {} }; @@ -289,6 +305,7 @@ static const struct of_device_id __maybe_unused tps53679_of_match[] = { {.compatible = "ti,tps53676", .data = (void *)tps53676}, {.compatible = "ti,tps53679", .data = (void *)tps53679}, {.compatible = "ti,tps53681", .data = (void *)tps53681}, + {.compatible = "ti,tps53685", .data = (void *)tps53685}, {.compatible = "ti,tps53688", .data = (void *)tps53688}, {} };
The TPS53685 is a fully AMD SVI3 compliant step down controller with trans-inductor voltage regulator (TLVR) topology support, dual channels, built-in non-volatile memory (NVM), PMBus interface, and full compatible with TI NexFET smart power stages. Add support for it to the tps53679 driver. Signed-off-by: Chiang Brian <chiang.brian@inventec.com> --- v4 -> V5: 1. document the compatible of tps53685 into dt-bindings 2. add the buffer length as argument for %*ph 3. Add Changelog v3 -> V4: 1. Add length comparison into the comparison of "id",or it may be true when the substring of "id" matches device id. 2. Restore `return 0;` in `tps53679_identify_chip()` V2 -> V3: 1. Remove the length comparsion in the comparison of "id". V1 -> V2: 1. Modify subject and description to meet requirements 2. Add "tps53685" into enum chips with numeric order 3. Modify the content of marco "TPS53681_DEVICE_ID" from 0x81 to "\x81" Add marco "TPS53685_DEVICE_ID" with content "TIShP" 4. Modify the type of "id" from u16 to char* in `tps53679_identify_chip()` 5. Modify the comparison of "id". It will be true if the string "id" matches device ID and compare with type char*, 6. Add the length comparsion into the comparison of "id". 7. Modify "len" as return code in `tps53679_identify_chip()` 8. Output device error log with %*ph, instead of 0x%x\n" 9. Use existing tps53679_identify_multiphase() with argument "TPS53685_DEVICE_ID" in tps53685_identify() rather than creating one tps53685_identify_multiphase() boot-log: [ 0.000000] Linux version 6.14.0-rc6+ (steven@TAO-BU2-S1-Laptop-Steven-2) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Mar 13 23:01:55 CST 2025 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.14.0-rc6+ root=UUID=9a4e0ebf-a137-44d9-acf0-a4b11d960b86 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c70fafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c70fb000-0x00000000c7c7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c7c7f000-0x00000000c7e7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c7e7f000-0x00000000c7efefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c7eff000-0x00000000c7efffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7f00000-0x00000000cc7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004317fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] e820: update [mem 0xa64ec018-0xa64fc057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a64ec017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a64ec018-0x00000000a64fc057] usable [ 0.000000] reserve setup_data: [mem 0x00000000a64fc058-0x00000000c70fafff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c70fb000-0x00000000c7c7efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c7c7f000-0x00000000c7e7efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000c7e7f000-0x00000000c7efefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000c7eff000-0x00000000c7efffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c7f00000-0x00000000cc7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004317fffff] usable [ 0.000000] efi: EFI v2.4 by HP [ 0.000000] efi: ACPI=0xc7efe000 ACPI 2.0=0xc7efe014 SMBIOS=0xc78db000 ESRT=0xc6fdf660 MOKvar=0xc78c1000 INITRD=0xaaa17898 [ 0.000000] efi: Not removing mem44: MMIO range=[0xf80fa000-0xf80fafff] (4KB) from e820 map [ 0.000000] efi: Not removing mem45: MMIO range=[0xf80fd000-0xf80fdfff] (4KB) from e820 map [ 0.000000] efi: Not removing mem46: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: HP HP EliteBook 840 G3/8079, BIOS N75 Ver. 01.24 01/30/2018 [ 0.000000] DMI: Memory slots populated: 2/2 [ 0.000000] tsc: Detected 2600.000 MHz processor [ 0.000000] tsc: Detected 2599.992 MHz TSC [ 0.000829] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000831] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000839] last_pfn = 0x431800 max_arch_pfn = 0x400000000 [ 0.000843] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs [ 0.000845] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001231] last_pfn = 0xc7f00 max_arch_pfn = 0x400000000 [ 0.008714] esrt: ESRT header is not in the memory map. [ 0.008721] Using GB pages for direct mapping [ 0.009116] Secure boot disabled [ 0.009117] RAMDISK: [mem 0x7417e000-0x95a18fff] [ 0.009171] ACPI: Early table checksum verification disabled [ 0.009174] ACPI: RSDP 0x00000000C7EFE014 000024 (v02 HPQOEM) [ 0.009178] ACPI: XSDT 0x00000000C7EBC188 0000D4 (v01 HPQOEM SLIC-BPC 00000000 01000013) [ 0.009184] ACPI: FACP 0x00000000C7EEE000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.009190] ACPI: DSDT 0x00000000C7EC4000 02654A (v02 HPQOEM 8079 00000000 INTL 20121018) [ 0.009193] ACPI: FACS 0x00000000C7E68000 000040 [ 0.009196] ACPI: SSDT 0x00000000C7EFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018) [ 0.009199] ACPI: TCPA 0x00000000C7EFA000 000032 (v02 HPQOEM EDK2 00000002 01000013) [ 0.009202] ACPI: SSDT 0x00000000C7EF9000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018) [ 0.009206] ACPI: UEFI 0x00000000C7E7A000 000042 (v01 HPQOEM EDK2 00000002 01000013) [ 0.009209] ACPI: SSDT 0x00000000C7EF3000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018) [ 0.009212] ACPI: SSDT 0x00000000C7EF2000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018) [ 0.009215] ACPI: MSDM 0x00000000C7EF1000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.009218] ACPI: SLIC 0x00000000C7EF0000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP 00000001) [ 0.009221] ACPI: WSMT 0x00000000C7EEF000 000028 (v01 HPQOEM 8079 00000001 HP 00000001) [ 0.009225] ACPI: HPET 0x00000000C7EED000 000038 (v01 HPQOEM 8079 00000001 HP 00000001) [ 0.009228] ACPI: APIC 0x00000000C7EEC000 0000BC (v01 HPQOEM 8079 00000001 HP 00000001) [ 0.009231] ACPI: MCFG 0x00000000C7EEB000 00003C (v01 HPQOEM 8079 00000001 HP 00000001) [ 0.009234] ACPI: SSDT 0x00000000C7EC3000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018) [ 0.009237] ACPI: SSDT 0x00000000C7EC2000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018) [ 0.009240] ACPI: SSDT 0x00000000C7EC1000 0003DC (v02 HPQOEM SDS_RTD3 00001000 INTL 20121018) [ 0.009243] ACPI: SSDT 0x00000000C7EC0000 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20121018) [ 0.009246] ACPI: NHLT 0x00000000C7EBF000 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.009250] ACPI: ASF! 0x00000000C7EBE000 0000A5 (v32 HPQOEM UYA 00000001 TFSM 000F4240) [ 0.009253] ACPI: FPDT 0x00000000C7EBD000 000044 (v01 HPQOEM EDK2 00000002 01000013) [ 0.009256] ACPI: BGRT 0x00000000C7EFD000 000038 (v01 HPQOEM EDK2 00000002 01000013) [ 0.009259] ACPI: SSDT 0x00000000C7EFB000 000260 (v02 HP PwrCtlEv 00000001 INTL 20121018) [ 0.009261] ACPI: Reserving FACP table memory at [mem 0xc7eee000-0xc7eee0f3] [ 0.009263] ACPI: Reserving DSDT table memory at [mem 0xc7ec4000-0xc7eea549] [ 0.009264] ACPI: Reserving FACS table memory at [mem 0xc7e68000-0xc7e6803f] [ 0.009265] ACPI: Reserving SSDT table memory at [mem 0xc7efc000-0xc7efc107] [ 0.009265] ACPI: Reserving TCPA table memory at [mem 0xc7efa000-0xc7efa031] [ 0.009266] ACPI: Reserving SSDT table memory at [mem 0xc7ef9000-0xc7ef93b7] [ 0.009267] ACPI: Reserving UEFI table memory at [mem 0xc7e7a000-0xc7e7a041] [ 0.009268] ACPI: Reserving SSDT table memory at [mem 0xc7ef3000-0xc7ef81f9] [ 0.009268] ACPI: Reserving SSDT table memory at [mem 0xc7ef2000-0xc7ef25b0] [ 0.009269] ACPI: Reserving MSDM table memory at [mem 0xc7ef1000-0xc7ef1054] [ 0.009270] ACPI: Reserving SLIC table memory at [mem 0xc7ef0000-0xc7ef0175] [ 0.009271] ACPI: Reserving WSMT table memory at [mem 0xc7eef000-0xc7eef027] [ 0.009271] ACPI: Reserving HPET table memory at [mem 0xc7eed000-0xc7eed037] [ 0.009272] ACPI: Reserving APIC table memory at [mem 0xc7eec000-0xc7eec0bb] [ 0.009273] ACPI: Reserving MCFG table memory at [mem 0xc7eeb000-0xc7eeb03b] [ 0.009274] ACPI: Reserving SSDT table memory at [mem 0xc7ec3000-0xc7ec3199] [ 0.009274] ACPI: Reserving SSDT table memory at [mem 0xc7ec2000-0xc7ec2728] [ 0.009275] ACPI: Reserving SSDT table memory at [mem 0xc7ec1000-0xc7ec13db] [ 0.009276] ACPI: Reserving SSDT table memory at [mem 0xc7ec0000-0xc7ec0e72] [ 0.009276] ACPI: Reserving NHLT table memory at [mem 0xc7ebf000-0xc7ebf02c] [ 0.009277] ACPI: Reserving ASF! table memory at [mem 0xc7ebe000-0xc7ebe0a4] [ 0.009278] ACPI: Reserving FPDT table memory at [mem 0xc7ebd000-0xc7ebd043] [ 0.009279] ACPI: Reserving BGRT table memory at [mem 0xc7efd000-0xc7efd037] [ 0.009280] ACPI: Reserving SSDT table memory at [mem 0xc7efb000-0xc7efb25f] [ 0.009461] No NUMA configuration found [ 0.009462] Faking a node at [mem 0x0000000000000000-0x00000004317fffff] [ 0.009472] NODE_DATA(0) allocated [mem 0x4317d5680-0x4317fffff] [ 0.009638] Zone ranges: [ 0.009639] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009640] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.009642] Normal [mem 0x0000000100000000-0x00000004317fffff] [ 0.009643] Device empty [ 0.009644] Movable zone start for each node [ 0.009646] Early memory node ranges [ 0.009646] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.009648] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.009649] node 0: [mem 0x000000000009f000-0x000000000009ffff] [ 0.009649] node 0: [mem 0x0000000000100000-0x00000000c70fafff] [ 0.009651] node 0: [mem 0x00000000c7eff000-0x00000000c7efffff] [ 0.009651] node 0: [mem 0x0000000100000000-0x00000004317fffff] [ 0.009653] Initmem setup node 0 [mem 0x0000000000001000-0x00000004317fffff] [ 0.009658] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009660] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009661] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009684] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.015727] On node 0, zone DMA32: 3588 pages in unavailable ranges [ 0.040516] On node 0, zone Normal: 256 pages in unavailable ranges [ 0.040788] On node 0, zone Normal: 26624 pages in unavailable ranges [ 0.040798] Reserving Intel graphics memory at [mem 0xca800000-0xcc7fffff] [ 0.040972] ACPI: PM-Timer IO Port: 0x1808 [ 0.040981] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.040982] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.040983] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.040984] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.040984] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.040985] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.040986] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.040987] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.041013] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.041016] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.041017] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.041022] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.041023] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.041029] e820: update [mem 0xb8890000-0xb8897fff] usable ==> reserved [ 0.041040] TSC deadline timer available [ 0.041045] CPU topo: Max. logical packages: 1 [ 0.041046] CPU topo: Max. logical dies: 1 [ 0.041046] CPU topo: Max. dies per package: 1 [ 0.041052] CPU topo: Max. threads per core: 2 [ 0.041052] CPU topo: Num. cores per package: 2 [ 0.041053] CPU topo: Num. threads per package: 4 [ 0.041053] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.041068] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.041070] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.041072] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.041073] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.041075] PM: hibernation: Registered nosave memory: [mem 0xa64ec000-0xa64ecfff] [ 0.041076] PM: hibernation: Registered nosave memory: [mem 0xa64fc000-0xa64fcfff] [ 0.041078] PM: hibernation: Registered nosave memory: [mem 0xb8890000-0xb8897fff] [ 0.041079] PM: hibernation: Registered nosave memory: [mem 0xc70fb000-0xc7c7efff] [ 0.041080] PM: hibernation: Registered nosave memory: [mem 0xc7c7f000-0xc7e7efff] [ 0.041081] PM: hibernation: Registered nosave memory: [mem 0xc7e7f000-0xc7efefff] [ 0.041082] PM: hibernation: Registered nosave memory: [mem 0xc7f00000-0xcc7fffff] [ 0.041083] PM: hibernation: Registered nosave memory: [mem 0xcc800000-0xf80f9fff] [ 0.041083] PM: hibernation: Registered nosave memory: [mem 0xf80fa000-0xf80fafff] [ 0.041084] PM: hibernation: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff] [ 0.041085] PM: hibernation: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff] [ 0.041085] PM: hibernation: Registered nosave memory: [mem 0xf80fe000-0xfdffffff] [ 0.041086] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.041087] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xffffffff] [ 0.041088] [mem 0xcc800000-0xf80f9fff] available for PCI devices [ 0.041089] Booting paravirtualized kernel on bare hardware [ 0.041092] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.041101] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.041491] percpu: Embedded 88 pages/cpu s237568 r8192 d114688 u524288 [ 0.041498] pcpu-alloc: s237568 r8192 d114688 u524288 alloc=1*2097152 [ 0.041500] pcpu-alloc: [0] 0 1 2 3 [ 0.041519] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.14.0-rc6+ root=UUID=9a4e0ebf-a137-44d9-acf0-a4b11d960b86 ro quiet splash [ 0.041592] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.14.0-rc6+", will be passed to user space. [ 0.041619] random: crng init done [ 0.041620] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes [ 0.043545] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.044535] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.044609] Fallback order for Node 0: 0 [ 0.044611] Built 1 zonelists, mobility grouping on. Total pages: 4163737 [ 0.044613] Policy zone: Normal [ 0.044619] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.044623] software IO TLB: area num 4. [ 0.105019] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.105042] Kernel/User page tables isolation: enabled [ 0.105073] ftrace: allocating 56697 entries in 222 pages [ 0.131978] ftrace: allocated 222 pages with 6 groups [ 0.132870] Dynamic Preempt: voluntary [ 0.132931] rcu: Preemptible hierarchical RCU implementation. [ 0.132932] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.132933] Trampoline variant of Tasks RCU enabled. [ 0.132934] Rude variant of Tasks RCU enabled. [ 0.132934] Tracing variant of Tasks RCU enabled. [ 0.132935] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.132936] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.132943] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.132945] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.132947] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.136783] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.137009] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.137196] Console: colour dummy device 80x25 [ 0.137199] printk: legacy console [tty0] enabled [ 0.137254] ACPI: Core revision 20240827 [ 0.137427] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.137464] APIC: Switch to symmetric I/O mode setup [ 0.138665] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.142723] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns [ 0.142729] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.98 BogoMIPS (lpj=2599992) [ 0.142751] x86/cpu: VMX (outside TXT) disabled by BIOS [ 0.142753] x86/cpu: SGX disabled or unsupported by BIOS. [ 0.142758] CPU0: Thermal monitoring enabled (TM1) [ 0.142802] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.142804] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4 [ 0.142808] process: using mwait in idle threads [ 0.142811] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.142814] Spectre V2 : Mitigation: IBRS [ 0.142816] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.142817] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.142818] RETBleed: Mitigation: IBRS [ 0.142820] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.142822] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.142824] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.142831] MDS: Mitigation: Clear CPU buffers [ 0.142833] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.142836] SRBDS: Mitigation: Microcode [ 0.142838] GDS: Vulnerable: No microcode [ 0.142843] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.142845] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.142847] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.142848] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.142850] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.142852] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.142854] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.142856] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.142857] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.143727] Freeing SMP alternatives memory: 48K [ 0.143727] pid_max: default: 32768 minimum: 301 [ 0.143727] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,ima,evm [ 0.143727] landlock: Up and running. [ 0.143727] Yama: becoming mindful. [ 0.143727] AppArmor: AppArmor initialized [ 0.143727] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.143727] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.143727] smpboot: CPU0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.143727] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.143727] ... version: 4 [ 0.143727] ... bit width: 48 [ 0.143727] ... generic registers: 4 [ 0.143727] ... value mask: 0000ffffffffffff [ 0.143727] ... max period: 00007fffffffffff [ 0.143727] ... fixed-purpose events: 3 [ 0.143727] ... event mask: 000000070000000f [ 0.143727] signal: max sigframe size: 2032 [ 0.143727] Estimated ratio of average max frequency by base frequency (times 1024): 1181 [ 0.144711] rcu: Hierarchical SRCU implementation. [ 0.144713] rcu: Max phase no-delay instances is 400. [ 0.144760] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.145293] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.145349] smp: Bringing up secondary CPUs ... [ 0.145463] smpboot: x86: Booting SMP configuration: [ 0.145464] .... node #0, CPUs: #1 #2 #3 [ 0.147922] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.147922] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.147922] smp: Brought up 1 node, 4 CPUs [ 0.147922] smpboot: Total of 4 processors activated (20799.93 BogoMIPS) [ 0.148815] Memory: 15693560K/16654948K available (21146K kernel code, 4607K rwdata, 8468K rodata, 5116K init, 4420K bss, 952032K reserved, 0K cma-reserved) [ 0.149275] devtmpfs: initialized [ 0.149275] x86/mm: Memory block size: 128MB [ 0.151126] ACPI: PM: Registering ACPI NVS region [mem 0xc7c7f000-0xc7e7efff] (2097152 bytes) [ 0.151126] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.151126] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.151126] pinctrl core: initialized pinctrl subsystem [ 0.151126] PM: RTC time: 00:19:48, date: 2025-03-14 [ 0.152116] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.152416] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.152574] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.152745] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.152781] audit: initializing netlink subsys (disabled) [ 0.152796] audit: type=2000 audit(1741911588.010:1): state=initialized audit_enabled=0 res=1 [ 0.152927] thermal_sys: Registered thermal governor 'fair_share' [ 0.152929] thermal_sys: Registered thermal governor 'bang_bang' [ 0.152931] thermal_sys: Registered thermal governor 'step_wise' [ 0.152932] thermal_sys: Registered thermal governor 'user_space' [ 0.152933] thermal_sys: Registered thermal governor 'power_allocator' [ 0.152943] EISA bus registered [ 0.152949] cpuidle: using governor ladder [ 0.152949] cpuidle: using governor menu [ 0.152949] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.152949] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.152949] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.152949] PCI: Using configuration type 1 for base access [ 0.153046] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.153773] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.153773] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.153773] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.153773] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.153901] ACPI: Added _OSI(Module Device) [ 0.153901] ACPI: Added _OSI(Processor Device) [ 0.153903] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.153905] ACPI: Added _OSI(Processor Aggregator Device) [ 0.199289] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.201646] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.209877] ACPI: Dynamic OEM Table Load: [ 0.209877] ACPI: SSDT 0xFFFF8BD5C1315800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018) [ 0.210727] ACPI: Dynamic OEM Table Load: [ 0.210727] ACPI: SSDT 0xFFFF8BD5C1ADB800 000660 (v02 PmRef Cpu0Ist 00003000 INTL 20121018) [ 0.213276] ACPI: Dynamic OEM Table Load: [ 0.213283] ACPI: SSDT 0xFFFF8BD5C0AD9240 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20121018) [ 0.214709] ACPI: Dynamic OEM Table Load: [ 0.214715] ACPI: SSDT 0xFFFF8BD5C12D3A00 000130 (v02 PmRef HwpLvt 00003000 INTL 20121018) [ 0.216711] ACPI: Dynamic OEM Table Load: [ 0.216721] ACPI: SSDT 0xFFFF8BD5C1AD9800 0005AA (v02 PmRef ApIst 00003000 INTL 20121018) [ 0.218681] ACPI: Dynamic OEM Table Load: [ 0.218688] ACPI: SSDT 0xFFFF8BD5C12D3E00 000119 (v02 PmRef ApHwp 00003000 INTL 20121018) [ 0.220207] ACPI: Dynamic OEM Table Load: [ 0.220213] ACPI: SSDT 0xFFFF8BD5C12D3000 000119 (v02 PmRef ApCst 00003000 INTL 20121018) [ 0.224540] ACPI: EC: EC started [ 0.224541] ACPI: EC: interrupt blocked [ 3.064032] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.064035] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 3.064037] ACPI: Interpreter enabled [ 3.064086] ACPI: PM: (supports S0 S3 S4 S5) [ 3.064087] ACPI: Using IOAPIC for interrupt routing [ 3.066160] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.066162] PCI: Using E820 reservations for host bridge windows [ 3.066903] ACPI: Enabled 8 GPEs in block 00 to 7F [ 3.068707] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource [ 3.069195] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource [ 3.069676] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource [ 3.076929] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource [ 3.077217] ACPI: \_SB_.PCI0.RP02.PXP_: New power resource [ 3.193312] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource [ 3.193751] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource [ 3.194179] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource [ 3.194600] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource [ 3.195064] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource [ 3.195486] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource [ 3.195946] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource [ 3.196370] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource [ 3.196793] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource [ 3.197215] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource [ 3.197637] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource [ 3.198054] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource [ 3.198461] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource [ 3.198874] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource [ 3.199285] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource [ 3.199694] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource [ 3.200112] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource [ 3.200518] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource [ 3.200927] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource [ 3.216322] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 3.216330] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 3.219482] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 3.219485] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 3.222159] PCI host bridge to bus 0000:00 [ 3.222164] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 3.222167] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 3.222169] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 3.222171] pci_bus 0000:00: root bus resource [mem 0xcc800000-0xf7ffffff window] [ 3.222173] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 3.222175] pci_bus 0000:00: root bus resource [bus 00-3e] [ 3.222197] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 conventional PCI endpoint [ 3.222302] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint [ 3.222321] pci 0000:00:02.0: BAR 0 [mem 0xe0000000-0xe0ffffff 64bit] [ 3.222324] pci 0000:00:02.0: BAR 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 3.222327] pci 0000:00:02.0: BAR 4 [io 0x3000-0x303f] [ 3.222342] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 3.222630] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint [ 3.222667] pci 0000:00:14.0: BAR 0 [mem 0xe1220000-0xe122ffff 64bit] [ 3.222705] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 3.223375] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint [ 3.223408] pci 0000:00:14.2: BAR 0 [mem 0xe124a000-0xe124afff 64bit] [ 3.223553] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint [ 3.223727] pci 0000:00:15.0: BAR 0 [mem 0xe124b000-0xe124bfff 64bit] [ 3.224228] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint [ 3.224261] pci 0000:00:16.0: BAR 0 [mem 0xe124c000-0xe124cfff 64bit] [ 3.224295] pci 0000:00:16.0: PME# supported from D3hot [ 3.224589] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 conventional PCI endpoint [ 3.224622] pci 0000:00:17.0: BAR 0 [mem 0xe1248000-0xe1249fff] [ 3.224625] pci 0000:00:17.0: BAR 1 [mem 0xe124f000-0xe124f0ff] [ 3.224627] pci 0000:00:17.0: BAR 2 [io 0x3080-0x3087] [ 3.224630] pci 0000:00:17.0: BAR 3 [io 0x3088-0x308b] [ 3.224632] pci 0000:00:17.0: BAR 4 [io 0x3040-0x305f] [ 3.224635] pci 0000:00:17.0: BAR 5 [mem 0xe124d000-0xe124d7ff] [ 3.224670] pci 0000:00:17.0: PME# supported from D3hot [ 3.225024] pci 0000:00:1c.0: [8086:9d11] type 01 class 0x060400 PCIe Root Port [ 3.225043] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 3.225049] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff] [ 3.225108] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 3.225863] pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400 PCIe Root Port [ 3.225882] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 3.225887] pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff] [ 3.225944] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 3.226685] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 conventional PCI endpoint [ 3.227037] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint [ 3.227075] pci 0000:00:1f.2: BAR 0 [mem 0xe1240000-0xe1243fff] [ 3.227371] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380 conventional PCI endpoint [ 3.227417] pci 0000:00:1f.3: BAR 0 [mem 0xe1244000-0xe1247fff 64bit] [ 3.227424] pci 0000:00:1f.3: BAR 4 [mem 0xe1230000-0xe123ffff 64bit] [ 3.227466] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 3.227975] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint [ 3.228100] pci 0000:00:1f.4: BAR 0 [mem 0xe124e000-0xe124e0ff 64bit] [ 3.228111] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] [ 3.228429] pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000 conventional PCI endpoint [ 3.228475] pci 0000:00:1f.6: BAR 0 [mem 0xe1200000-0xe121ffff] [ 3.228526] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 3.228882] pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000 PCIe Endpoint [ 3.228937] pci 0000:01:00.0: BAR 0 [mem 0xe1000000-0xe1000fff] [ 3.229043] pci 0000:01:00.0: supports D1 D2 [ 3.229045] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 3.229593] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 3.229702] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000 PCIe Endpoint [ 3.229804] pci 0000:02:00.0: BAR 0 [mem 0xe1100000-0xe1101fff 64bit] [ 3.229971] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 3.230597] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 3.233887] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 3.233962] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 3.234035] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 3.234111] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 3.234184] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 3.234256] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 3.234329] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 3.234402] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 3.235464] ACPI: EC: interrupt unblocked [ 3.235466] ACPI: EC: event unblocked [ 3.235471] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.235473] ACPI: EC: GPE=0x6e [ 3.235475] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 3.235477] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 3.235554] iommu: Default domain type: Translated [ 3.235554] iommu: DMA domain TLB invalidation policy: lazy mode [ 3.235554] SCSI subsystem initialized [ 3.235759] libata version 3.00 loaded. [ 3.235759] ACPI: bus type USB registered [ 3.235773] usbcore: registered new interface driver usbfs [ 3.235779] usbcore: registered new interface driver hub [ 3.235785] usbcore: registered new device driver usb [ 3.235811] pps_core: LinuxPPS API ver. 1 registered [ 3.235813] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 3.235816] PTP clock support registered [ 3.235830] EDAC MC: Ver: 3.0.0 [ 3.235902] efivars: Registered efivars operations [ 3.236738] NetLabel: Initializing [ 3.236739] NetLabel: domain hash size = 128 [ 3.236741] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 3.236760] NetLabel: unlabeled traffic allowed by default [ 3.236778] mctp: management component transport protocol core [ 3.236778] NET: Registered PF_MCTP protocol family [ 3.236778] PCI: Using ACPI for IRQ routing [ 3.243579] PCI: pci_cache_line_size set to 64 bytes [ 3.243673] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 3.243675] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 3.243677] e820: reserve RAM buffer [mem 0xa64ec018-0xa7ffffff] [ 3.243679] e820: reserve RAM buffer [mem 0xb8890000-0xbbffffff] [ 3.243680] e820: reserve RAM buffer [mem 0xc70fb000-0xc7ffffff] [ 3.243682] e820: reserve RAM buffer [mem 0xc7f00000-0xc7ffffff] [ 3.243683] e820: reserve RAM buffer [mem 0x431800000-0x433ffffff] [ 3.243735] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 3.243737] pci 0000:00:02.0: vgaarb: bridge control possible [ 3.243739] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.243744] vgaarb: loaded [ 3.243798] clocksource: Switched to clocksource tsc-early [ 3.244507] VFS: Disk quotas dquot_6.6.0 [ 3.244524] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.244705] AppArmor: AppArmor Filesystem Enabled [ 3.244745] pnp: PnP ACPI init [ 3.244956] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 3.244960] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 3.244962] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 3.244965] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 3.244967] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 3.245343] system 00:01: [io 0x2000-0x20fe] has been reserved [ 3.245518] system 00:02: [io 0x0680-0x069f] has been reserved [ 3.245521] system 00:02: [io 0xffff] has been reserved [ 3.245523] system 00:02: [io 0xffff] has been reserved [ 3.245525] system 00:02: [io 0xffff] has been reserved [ 3.245527] system 00:02: [io 0x1800-0x18fe] has been reserved [ 3.245529] system 00:02: [io 0x164e-0x164f] has been reserved [ 3.245699] system 00:04: [io 0x1854-0x1857] has been reserved [ 3.245827] system 00:07: [io 0x0200-0x023f] has been reserved [ 3.245830] system 00:07: [mem 0xfedf0000-0xfedfffff] has been reserved [ 3.247362] system 00:08: [mem 0xfe031000-0xfe031fff] has been reserved [ 3.247365] system 00:08: [mem 0xfe030008-0xfe030fff] has been reserved [ 3.247918] system 00:09: [mem 0xfe030000-0xfe030007] has been reserved [ 3.248276] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 3.248278] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 3.248280] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 3.248283] system 00:0a: [mem 0xf8000000-0xfbffffff] could not be reserved [ 3.248285] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 3.248287] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 3.248288] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 3.248291] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved [ 3.248293] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved [ 3.248294] system 00:0a: [mem 0xcc800000-0xcc81ffff] has been reserved [ 3.248740] pnp: PnP ACPI: found 12 devices [ 3.254844] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.254909] NET: Registered PF_INET protocol family [ 3.255071] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 3.257916] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 3.257953] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.258029] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.258272] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.258536] TCP: Hash tables configured (established 131072 bind 65536) [ 3.258639] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 3.258711] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 3.258827] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 3.258947] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.258958] NET: Registered PF_XDP protocol family [ 3.258966] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 3.258971] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 3.258992] pci 0000:00:1c.0: bridge window [mem 0xcc900000-0xccafffff 64bit pref]: assigned [ 3.258996] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]: assigned [ 3.259000] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 3.259003] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 3.259007] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff] [ 3.259010] pci 0000:00:1c.0: bridge window [mem 0xcc900000-0xccafffff 64bit pref] [ 3.259015] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 3.259019] pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff] [ 3.259026] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 3.259028] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 3.259030] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 3.259032] pci_bus 0000:00: resource 7 [mem 0xcc800000-0xf7ffffff window] [ 3.259034] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 3.259036] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 3.259038] pci_bus 0000:01: resource 1 [mem 0xe1000000-0xe10fffff] [ 3.259040] pci_bus 0000:01: resource 2 [mem 0xcc900000-0xccafffff 64bit pref] [ 3.259042] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff] [ 3.259588] PCI: CLS 0 bytes, default 64 [ 3.259640] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint [ 3.259775] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit] [ 3.259913] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.259914] software IO TLB: mapped [mem 0x00000000b3e88000-0x00000000b7e88000] (64MB) [ 3.259992] Trying to unpack rootfs image as initramfs... [ 3.263184] Initialise system trusted keyrings [ 3.263196] Key type blacklist registered [ 3.263259] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 3.263283] zbud: loaded [ 3.263668] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.263784] fuse: init (API version 7.42) [ 3.263945] integrity: Platform Keyring initialized [ 3.263952] integrity: Machine keyring initialized [ 3.281540] Key type asymmetric registered [ 3.281545] Asymmetric key parser 'x509' registered [ 3.281576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 3.281652] io scheduler mq-deadline registered [ 3.284000] ledtrig-cpu: registered to indicate activity on CPUs [ 3.284344] pcieport 0000:00:1c.0: PME: Signaling with IRQ 120 [ 3.284442] pcieport 0000:00:1c.0: AER: enabled with IRQ 120 [ 3.284472] pcieport 0000:00:1c.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 3.284868] pcieport 0000:00:1c.3: PME: Signaling with IRQ 121 [ 3.284936] pcieport 0000:00:1c.3: AER: enabled with IRQ 121 [ 3.285056] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.285888] ACPI: AC: AC Adapter [AC] (on-line) [ 3.285976] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 3.286004] ACPI: button: Sleep Button [SLPB] [ 3.286044] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 3.286069] ACPI: button: Lid Switch [LID] [ 3.286112] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 3.286160] ACPI: button: Power Button [PWRF] [ 3.295202] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.295207] ACPI: thermal: Thermal Zone [CPUZ] (46 C) [ 3.299002] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.299006] ACPI: thermal: Thermal Zone [GFXZ] (0 C) [ 3.301917] thermal LNXTHERM:02: registered as thermal_zone2 [ 3.301920] ACPI: thermal: Thermal Zone [EXTZ] (33 C) [ 3.305834] thermal LNXTHERM:03: registered as thermal_zone3 [ 3.305837] ACPI: thermal: Thermal Zone [LOCZ] (32 C) [ 3.308782] thermal LNXTHERM:04: registered as thermal_zone4 [ 3.308785] ACPI: thermal: Thermal Zone [BATZ] (28 C) [ 3.309267] thermal LNXTHERM:05: registered as thermal_zone5 [ 3.309270] ACPI: thermal: Thermal Zone [PCHZ] (127 C) [ 3.309555] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.312110] hpet_acpi_add: no address or irqs in _CRS [ 3.312144] Linux agpgart interface v0.103 [ 3.314675] tpm_tis 00:0b: 1.2 TPM (device-id 0x1B, rev-id 16) [ 3.324191] ACPI: battery: Slot [BAT0] (battery present) [ 3.327649] tpm tpm0: TPM is disabled/deactivated (0x7) [ 3.327661] tpm tpm0: tpm_read_log_acpi: TCPA log area empty [ 3.328015] ACPI: bus type drm_connector registered [ 3.329818] loop: module loaded [ 3.330127] tun: Universal TUN/TAP device driver, 1.6 [ 3.330172] PPP generic driver version 2.4.2 [ 3.330469] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.330476] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 3.331552] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 3.332013] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.332017] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.332020] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 3.332061] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 3.332064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.332066] usb usb1: Product: xHCI Host Controller [ 3.332068] usb usb1: Manufacturer: Linux 6.14.0-rc6+ xhci-hcd [ 3.332069] usb usb1: SerialNumber: 0000:00:14.0 [ 3.332209] hub 1-0:1.0: USB hub found [ 3.332226] hub 1-0:1.0: 12 ports detected [ 3.333215] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14 [ 3.333219] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.333221] usb usb2: Product: xHCI Host Controller [ 3.333222] usb usb2: Manufacturer: Linux 6.14.0-rc6+ xhci-hcd [ 3.333224] usb usb2: SerialNumber: 0000:00:14.0 [ 3.333323] hub 2-0:1.0: USB hub found [ 3.333335] hub 2-0:1.0: 6 ports detected [ 3.333737] usb: port power management may be unreliable [ 3.334113] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.335400] i8042: Detected active multiplexing controller, rev 1.1 [ 3.335637] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.335643] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.335674] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.335694] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.335714] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.335822] mousedev: PS/2 mouse device common for all mice [ 3.335962] rtc_cmos 00:03: RTC can wake from S4 [ 3.336669] rtc_cmos 00:03: registered as rtc0 [ 3.336797] rtc_cmos 00:03: setting system clock to 2025-03-14T00:19:51 UTC (1741911591) [ 3.336827] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram [ 3.336838] i2c_dev: i2c /dev entries driver [ 3.336926] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 3.336949] device-mapper: uevent: version 1.0.3 [ 3.336996] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev [ 3.337021] platform eisa.0: Probing EISA bus 0 [ 3.337023] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 3.337025] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 3.337027] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 3.337028] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 3.337030] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 3.337031] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 3.337033] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 3.337034] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 3.337036] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 3.337037] platform eisa.0: EISA: Detected 0 cards [ 3.337041] intel_pstate: Intel P-state driver initializing [ 3.337166] intel_pstate: HWP enabled [ 3.337352] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0 [ 3.338230] fbcon: Deferring console take-over [ 3.338234] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 3.338312] drop_monitor: Initializing network drop monitor service [ 3.338428] NET: Registered PF_INET6 protocol family [ 3.351620] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.566650] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 3.701033] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 0.02 [ 3.701054] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.701056] usb 1-2: Product: USB2.1 Hub [ 3.701058] usb 1-2: Manufacturer: Generic [ 3.702522] hub 1-2:1.0: USB hub found [ 3.703561] hub 1-2:1.0: 4 ports detected [ 3.807349] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 3.829457] usb 2-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 0.02 [ 3.829463] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.829479] usb 2-2: Product: USB3.2 Hub [ 3.829481] usb 2-2: Manufacturer: Generic [ 3.833565] hub 2-2:1.0: USB hub found [ 3.834958] hub 2-2:1.0: 4 ports detected [ 3.935651] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 4.060885] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01 [ 4.060891] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.125684] usb 2-2.4: new SuperSpeed USB device number 3 using xhci_hcd [ 4.137296] usb 2-2.4: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00 [ 4.137302] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 4.137304] usb 2-2.4: Product: USB 10/100/1000 LAN [ 4.137306] usb 2-2.4: Manufacturer: TP-Link [ 4.137308] usb 2-2.4: SerialNumber: 000001 [ 4.248651] usb 1-8: new full-speed USB device number 4 using xhci_hcd [ 4.270875] tsc: Refined TSC clocksource calibration: 2592.000 MHz [ 4.270883] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns [ 4.270933] clocksource: Switched to clocksource tsc [ 4.372967] usb 1-8: New USB device found, idVendor=138a, idProduct=003f, bcdDevice= 1.04 [ 4.372973] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 4.372976] usb 1-8: SerialNumber: 00a0d4e211a3 [ 4.486656] usb 1-9: new high-speed USB device number 5 using xhci_hcd [ 4.640430] usb 1-9: New USB device found, idVendor=04f2, idProduct=b51d, bcdDevice=99.06 [ 4.640437] usb 1-9: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 4.640439] usb 1-9: Product: HP HD Camera [ 4.640441] usb 1-9: Manufacturer: Generic [ 4.640442] usb 1-9: SerialNumber: 200901010001 [ 6.591447] Freeing initrd memory: 549484K [ 6.599248] Segment Routing with IPv6 [ 6.599282] In-situ OAM (IOAM) with IPv6 [ 6.599338] NET: Registered PF_PACKET protocol family [ 6.599413] Key type dns_resolver registered [ 6.599771] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 6.599860] microcode: Current revision: 0x000000f0 [ 6.599863] microcode: Updated early from: 0x000000c2 [ 6.600065] IPI shorthand broadcast: enabled [ 6.602002] sched_clock: Marking stable (6596001267, 5593406)->(6678254712, -76660039) [ 6.602192] registered taskstats version 1 [ 6.602331] Loading compiled-in X.509 certificates [ 6.602915] Loaded X.509 cert 'Build time autogenerated kernel key: 60c89a582e12fd4b78574273b3a1a97b9e7d33ec' [ 6.607427] Demotion targets for Node 0: null [ 6.607501] Key type .fscrypt registered [ 6.607503] Key type fscrypt-provisioning registered [ 6.607541] Key type trusted registered [ 6.625241] Key type encrypted registered [ 6.625247] AppArmor: AppArmor sha256 policy hashing enabled [ 6.625787] Loading compiled-in module X.509 certificates [ 6.626286] Loaded X.509 cert 'Build time autogenerated kernel key: 60c89a582e12fd4b78574273b3a1a97b9e7d33ec' [ 6.626289] ima: Allocated hash algorithm: sha256 [ 6.628725] ima: Error Communicating to TPM chip [ 6.631826] ima: Error Communicating to TPM chip [ 6.634746] ima: Error Communicating to TPM chip [ 6.637449] ima: Error Communicating to TPM chip [ 6.639770] ima: Error Communicating to TPM chip [ 6.642675] ima: Error Communicating to TPM chip [ 6.645379] ima: Error Communicating to TPM chip [ 6.647842] ima: Error Communicating to TPM chip [ 6.651763] ima: No architecture policies found [ 6.651788] evm: Initialising EVM extended attributes: [ 6.651790] evm: security.selinux [ 6.651791] evm: security.SMACK64 [ 6.651793] evm: security.SMACK64EXEC [ 6.651794] evm: security.SMACK64TRANSMUTE [ 6.651796] evm: security.SMACK64MMAP [ 6.651797] evm: security.apparmor [ 6.651798] evm: security.ima [ 6.651799] evm: security.capability [ 6.651801] evm: HMAC attrs: 0x1 [ 6.652127] PM: Magic number: 1:301:304 [ 6.652167] tty tty33: hash matches [ 6.652511] RAS: Correctable Errors collector initialized. [ 6.652546] clk: Disabling unused clocks [ 6.652548] PM: genpd: Disabling unused power domains [ 6.653966] Freeing unused decrypted memory: 2028K [ 6.655038] Freeing unused kernel image (initmem) memory: 5116K [ 6.655186] Write protecting the kernel read-only data: 32768k [ 6.656019] Freeing unused kernel image (text/rodata gap) memory: 1380K [ 6.656725] Freeing unused kernel image (rodata/data gap) memory: 1772K [ 6.713313] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 6.713315] x86/mm: Checking user space page tables [ 6.762822] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 6.762830] Run /init as init process [ 6.762832] with arguments: [ 6.762834] /init [ 6.762835] splash [ 6.762837] with environment: [ 6.762838] HOME=/ [ 6.762839] TERM=linux [ 6.762840] BOOT_IMAGE=/boot/vmlinuz-6.14.0-rc6+ [ 6.970962] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.970974] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.970981] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.970987] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.970993] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.970999] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971011] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971017] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971023] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971039] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971046] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971052] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971098] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971104] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971125] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971131] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971137] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971143] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971150] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971162] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971168] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971174] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971180] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971186] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971202] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971218] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971234] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971241] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971253] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971259] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971271] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971277] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971284] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971290] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971329] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971336] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971516] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971529] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971541] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971553] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971581] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971588] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971611] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971618] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971625] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971631] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 6.971638] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22 [ 7.028647] ahci 0000:00:17.0: version 3.0 [ 7.029028] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 7.031494] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: DF4E63B6-3BBC-4858-9737-C74F82F821F3 has zero instances [ 7.031550] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: 8F1F6436-9F42-42C8-BADC-0E9424F20C9A has zero instances [ 7.031672] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 7.041271] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 7.041561] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 7.043929] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode [ 7.043935] ahci 0000:00:17.0: 2/2 ports implemented (port mask 0x5) [ 7.043937] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 7.047944] scsi host0: ahci [ 7.057581] scsi host1: ahci [ 7.060841] usbcore: registered new device driver r8152-cfgselector [ 7.061671] scsi host2: ahci [ 7.061783] ata1: SATA max UDMA/133 abar m2048@0xe124d000 port 0xe124d100 irq 123 lpm-pol 3 [ 7.061787] ata2: DUMMY [ 7.061792] ata3: SATA max UDMA/133 abar m2048@0xe124d000 port 0xe124d200 irq 123 lpm-pol 3 [ 7.080623] e1000e: Intel(R) PRO/1000 Network Driver [ 7.080629] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 7.080965] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 7.155735] r8152-cfgselector 2-2.4: reset SuperSpeed USB device number 3 using xhci_hcd [ 7.217365] r8152 2-2.4:1.0 eth0: v1.12.13 [ 7.217435] usbcore: registered new interface driver r8152 [ 7.268042] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 7.331249] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 10:62:e5:55:85:e5 [ 7.331264] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection [ 7.331349] e1000e 0000:00:1f.6 eth1: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 7.372699] ata1: SATA link down (SStatus 4 SControl 300) [ 7.677313] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.678549] ata3.00: Model 'SanDisk SD9SN8W-512G-1006', rev 'X6103006', applying quirks: maxtrim128m [ 7.678885] ata3.00: ACPI cmd f5/00:00:00:00:00:e0(SECURITY FREEZE LOCK) filtered out [ 7.678903] ata3.00: ATA-11: SanDisk SD9SN8W-512G-1006, X6103006, max UDMA/100 [ 7.679126] ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 7.684235] ata3.00: Features: Dev-Sleep [ 7.685890] ata3.00: ACPI cmd f5/00:00:00:00:00:e0(SECURITY FREEZE LOCK) filtered out [ 7.692515] ata3.00: configured for UDMA/100 [ 7.703193] scsi 2:0:0:0: Direct-Access ATA SanDisk SD9SN8W- 3006 PQ: 0 ANSI: 5 [ 7.704259] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 7.704319] sd 2:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 7.704332] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 7.704371] sd 2:0:0:0: [sda] Write Protect is off [ 7.704382] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.704437] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.704533] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 7.715347] sda: sda1 sda2 [ 7.715859] sd 2:0:0:0: [sda] Attached SCSI disk [ 7.725189] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1 [ 7.730092] usbcore: registered new interface driver cdc_ether [ 7.740420] r8152 2-2.4:1.0 enx1c61b47b81ad: renamed from eth0 [ 7.775998] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9 [ 7.920366] EXT4-fs (sda2): mounted filesystem 9a4e0ebf-a137-44d9-acf0-a4b11d960b86 ro with ordered data mode. Quota mode: none. [ 8.305037] systemd[1]: Inserted module 'autofs4' [ 8.438994] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 8.439026] systemd[1]: Detected architecture x86-64. [ 8.442342] systemd[1]: Hostname set to <TAO-BU2-S1-Laptop-Steven-2>. [ 8.511405] psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758] [ 8.541125] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..] [ 8.541152] psmouse serio3: synaptics: Your touchpad (PNP: SYN3037 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 8.583886] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. [ 8.595349] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742 [ 8.630331] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10 [ 8.733673] systemd[1]: Queued start job for default target graphical.target. [ 8.755122] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 8.755686] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 8.756052] systemd[1]: Created slice user.slice - User and Session Slice. [ 8.756134] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 8.756355] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 8.756392] systemd[1]: Expecting device dev-disk-by\x2duuid-48C2\x2dF089.device - /dev/disk/by-uuid/48C2-F089... [ 8.756417] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 8.756445] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 8.756456] systemd[1]: Reached target slices.target - Slice Units. [ 8.756469] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. [ 8.756495] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 8.756735] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 8.756853] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 8.756919] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 8.757046] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 8.757199] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 8.757402] systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket. [ 8.757434] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 8.757824] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 8.757966] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 8.759555] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 8.760502] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 8.762019] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 8.765704] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 8.770817] systemd[1]: Starting systemd-journald.service - Journal Service... [ 8.772748] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 8.773935] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 8.775545] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 8.780174] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 8.782460] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 8.784528] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 8.786221] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 8.789900] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 8.790097] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 8.792281] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 8.792314] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 8.794075] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 8.794186] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 8.797079] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 8.799575] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 8.801610] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 8.801879] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 8.802153] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 8.802671] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 8.803228] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 8.803454] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 8.805334] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 8.807099] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 8.810189] systemd-journald[277]: Collecting audit messages is disabled. [ 8.816267] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 8.819584] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 8.819917] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 8.824488] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 8.824735] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 8.827646] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 8.827873] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 8.828083] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 8.831310] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 8.831521] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 8.836742] pstore: Using crash dump compression: deflate [ 8.837821] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 8.851830] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 8.852331] lp: driver loaded but no devices found [ 8.868017] EXT4-fs (sda2): re-mounted 9a4e0ebf-a137-44d9-acf0-a4b11d960b86 r/w. Quota mode: none. [ 8.872865] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 8.882611] ppdev: user-space parallel port driver [ 8.884072] systemd[1]: Activating swap swap.img.swap - /swap.img... [ 8.884910] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 8.887851] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 8.888047] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 8.900176] pstore: Registered efi_pstore as persistent store backend [ 8.901116] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 8.901335] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 8.901592] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 8.905188] Adding 4194300k swap on /swap.img. Priority:-2 extents:33 across:4587520k SS [ 8.910864] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 8.911075] systemd[1]: Activated swap swap.img.swap - /swap.img. [ 8.911471] systemd[1]: Reached target swap.target - Swaps. [ 8.911568] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. [ 8.915775] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 8.925464] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 8.934432] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 8.935009] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed. [ 8.956864] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. [ 8.966835] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... [ 8.967251] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 8.967399] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. [ 8.974191] systemd[1]: Mounting snap-bare-5.mount - Mount unit for bare, revision 5... [ 8.978699] systemd[1]: Mounting snap-core22-1380.mount - Mount unit for core22, revision 1380... [ 8.982747] systemd[1]: Mounting snap-firefox-4173.mount - Mount unit for firefox, revision 4173... [ 8.986139] systemd[1]: Mounting snap-firmware\x2dupdater-127.mount - Mount unit for firmware-updater, revision 127... [ 8.989775] systemd[1]: Mounting snap-gnome\x2d42\x2d2204-176.mount - Mount unit for gnome-42-2204, revision 176... [ 8.991092] loop0: detected capacity change from 0 to 8 [ 8.991868] systemd[1]: Mounting snap-gtk\x2dcommon\x2dthemes-1535.mount - Mount unit for gtk-common-themes, revision 1535... [ 8.993797] systemd[1]: Mounting snap-snap\x2dstore-1124.mount - Mount unit for snap-store, revision 1124... [ 8.998747] systemd[1]: Mounting snap-snapd-21465.mount - Mount unit for snapd, revision 21465... [ 9.001838] systemd[1]: Mounting snap-snapd\x2ddesktop\x2dintegration-157.mount - Mount unit for snapd-desktop-integration, revision 157... [ 9.006257] loop1: detected capacity change from 0 to 552192 [ 9.007938] systemd[1]: Mounting var-snap-firefox-common-host\x2dhunspell.mount - Mount unit for firefox, revision 4173 via mount-control... [ 9.008477] loop2: detected capacity change from 0 to 187776 [ 9.010265] systemd[1]: Started systemd-journald.service - Journal Service. [ 9.012832] loop3: detected capacity change from 0 to 1034424 [ 9.013058] loop4: detected capacity change from 0 to 21136 [ 9.017469] loop5: detected capacity change from 0 to 152040 [ 9.017966] loop6: detected capacity change from 0 to 21952 [ 9.024674] loop7: detected capacity change from 0 to 952 [ 9.026062] loop8: detected capacity change from 0 to 79328 [ 9.068137] systemd-journald[277]: Received client request to flush runtime journal. [ 9.086357] systemd-journald[277]: /var/log/journal/e454872f0a7240d09e0b415a13f53b77/system.journal: Journal file uses a different sequence number ID, rotating. [ 9.086366] systemd-journald[277]: Rotating system journal. [ 9.536022] input: Wireless hotkeys as /devices/virtual/input/input12 [ 9.574716] intel_pmc_core INT33A1:00: initialized [ 9.651787] hp_accel: hardware type HPB64xx found [ 9.697881] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 9.732335] mc: Linux media interface: v0.10 [ 9.760299] lis3lv02d: 8 bits 3DC sensor found [ 9.779636] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 9.779886] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 9.780433] ACPI Error: Needed [Buffer/String/Package], found [Integer] 000000006b67ca40 (20240827/exresop-557) [ 9.780446] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20240827/dswexec-433) [ 9.780459] Initialized Local Variables for Method [WVPO]: [ 9.780462] Local1: 00000000a7b98880 <Obj> Buffer(12) 00 00 00 00 00 00 00 00 [ 9.780485] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 9.780487] Arg0: 00000000e11a33f3 <Obj> Integer 0000000000000004 [ 9.780495] Arg1: 000000006b67ca40 <Obj> Integer 0000000000000000 [ 9.780507] ACPI Error: Aborting method \_SB.WMIV.WVPO due to previous error (AE_AML_OPERAND_TYPE) (20240827/psparse-529) [ 9.780521] ACPI Error: Aborting method \_SB.WMIV.WMPV due to previous error (AE_AML_OPERAND_TYPE) (20240827/psparse-529) [ 9.785504] ACPI Error: Needed [Buffer/String/Package], found [Integer] 000000002318a38c (20240827/exresop-557) [ 9.785533] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20240827/dswexec-433) [ 9.785546] Initialized Local Variables for Method [WVPO]: [ 9.785548] Local1: 00000000551b3f05 <Obj> Buffer(12) 00 00 00 00 00 00 00 00 [ 9.785569] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 9.785572] Arg0: 000000007e8fef5c <Obj> Integer 0000000000000004 [ 9.785580] Arg1: 000000002318a38c <Obj> Integer 0000000000000000 [ 9.785593] ACPI Error: Aborting method \_SB.WMIV.WVPO due to previous error (AE_AML_OPERAND_TYPE) (20240827/psparse-529) [ 9.785661] ACPI Error: Aborting method \_SB.WMIV.WMPV due to previous error (AE_AML_OPERAND_TYPE) (20240827/psparse-529) [ 9.787967] i2c i2c-1: Successfully instantiated SPD at 0x50 [ 9.790783] ACPI Error: Needed [Buffer/String/Package], found [Integer] 000000005a0ed2a3 (20240827/exresop-557) [ 9.791137] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20240827/dswexec-433) [ 9.791154] Initialized Local Variables for Method [WVPO]: [ 9.791156] Local1: 00000000f362aaf8 <Obj> Buffer(136) 00 00 00 00 00 00 00 00 [ 9.791180] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 9.791183] Arg0: 00000000ffdaec64 <Obj> Integer 0000000000000080 [ 9.791192] Arg1: 000000005a0ed2a3 <Obj> Integer 0000000000000000 [ 9.791207] ACPI Error: Aborting method \_SB.WMIV.WVPO due to previous error (AE_AML_OPERAND_TYPE) (20240827/psparse-529) [ 9.791224] ACPI Error: Aborting method \_SB.WMIV.WMPV due to previous error (AE_AML_OPERAND_TYPE) (20240827/psparse-529) [ 9.791337] input: HP WMI hotkeys as /devices/virtual/input/input13 [ 9.795575] ACPI Error: Needed [Buffer/String/Package], found [Integer] 00000000c2f98307 (20240827/exresop-557) [ 9.796615] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20240827/dswexec-433) [ 9.796631] Initialized Local Variables for Method [WVPO]: [ 9.796633] Local1: 00000000a635da8f <Obj> Buffer(136) 00 00 00 00 00 00 00 00 [ 9.796654] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 9.796656] Arg0: 000000001cabc09b <Obj> Integer 0000000000000080 [ 9.796665] Arg1: 00000000c2f98307 <Obj> Integer 0000000000000000 [ 9.796677] ACPI Error: Aborting method \_SB.WMIV.WVPO due to previous error (AE_AML_OPERAND_TYPE) (20240827/psparse-529) [ 9.796691] ACPI Error: Aborting method \_SB.WMIV.WMPV due to previous error (AE_AML_OPERAND_TYPE) (20240827/psparse-529) [ 9.816147] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 9.816153] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 9.816155] RAPL PMU: hw unit of domain package 2^-14 Joules [ 9.816157] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 9.816159] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 9.882344] videodev: Linux video capture interface: v2.00 [ 9.885488] Bluetooth: Core ver 2.22 [ 9.885517] NET: Registered PF_BLUETOOTH protocol family [ 9.885519] Bluetooth: HCI device and connection manager initialized [ 9.885524] Bluetooth: HCI socket layer initialized [ 9.885526] Bluetooth: L2CAP socket layer initialized [ 9.885532] Bluetooth: SCO socket layer initialized [ 9.917945] cryptd: max_cpu_qlen set to 1000 [ 9.941712] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14 [ 9.973688] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.975096] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.975329] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 10.025348] AES CTR mode by8 optimization enabled [ 10.043467] usbcore: registered new interface driver btusb [ 10.046637] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 10.053703] Bluetooth: hci0: Device revision is 5 [ 10.053710] Bluetooth: hci0: Secure boot is enabled [ 10.053712] Bluetooth: hci0: OTP lock is enabled [ 10.053714] Bluetooth: hci0: API lock is enabled [ 10.053717] Bluetooth: hci0: Debug lock is disabled [ 10.053719] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 10.078485] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 10.094653] ee1004 1-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 10.131919] Intel(R) Wireless WiFi driver for Linux [ 10.134013] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 10.155564] iwlwifi 0000:02:00.0: Detected crf-id 0xbadcafe, cnv-id 0x3000000 wfpm id 0x80000000 [ 10.155586] iwlwifi 0000:02:00.0: PCI dev 24f3/1010, rev=0x201, rfid=0xd55555d5 [ 10.155592] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260 [ 10.177329] iwlwifi 0000:02:00.0: loaded firmware version 36.ca7b901d.0 8000C-36.ucode op_mode iwlmvm [ 10.197727] usb 1-9: Found UVC 1.00 device HP HD Camera (04f2:b51d) [ 10.207361] usbcore: registered new interface driver uvcvideo [ 10.222386] audit: type=1400 audit(1741911598.384:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=552 comm="apparmor_parser" [ 10.224183] audit: type=1400 audit(1741911598.385:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=550 comm="apparmor_parser" [ 10.224192] audit: type=1400 audit(1741911598.386:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=553 comm="apparmor_parser" [ 10.224254] audit: type=1400 audit(1741911598.386:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=551 comm="apparmor_parser" [ 10.229615] audit: type=1400 audit(1741911598.391:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=576 comm="apparmor_parser" [ 10.230371] audit: type=1400 audit(1741911598.392:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=575 comm="apparmor_parser" [ 10.232344] audit: type=1400 audit(1741911598.394:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=577 comm="apparmor_parser" [ 10.234397] intel_tcc_cooling: Programmable TCC Offset detected [ 10.236514] audit: type=1400 audit(1741911598.398:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=578 comm="apparmor_parser" [ 10.237133] audit: type=1400 audit(1741911598.399:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=581 comm="apparmor_parser" [ 10.237170] audit: type=1400 audit(1741911598.399:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=583 comm="apparmor_parser" [ 10.379877] intel_rapl_common: Found RAPL domain package [ 10.379889] intel_rapl_common: Found RAPL domain core [ 10.381718] intel_rapl_common: Found RAPL domain uncore [ 10.381731] intel_rapl_common: Found RAPL domain psys [ 10.459558] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 11.016531] iwlwifi 0000:02:00.0: base HW address: 7c:76:35:01:12:24, OTP minor version: 0x0 [ 11.396797] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 11.443205] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 11.705752] Bluetooth: hci0: Waiting for firmware download to complete [ 11.706621] Bluetooth: hci0: Firmware loaded in 1589970 usecs [ 11.706681] Bluetooth: hci0: Waiting for device to boot [ 11.718626] Bluetooth: hci0: Device booted in 11695 usecs [ 11.719022] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 11.722625] Bluetooth: hci0: Applying Intel DDC parameters completed [ 11.723632] Bluetooth: hci0: Firmware revision 0.0 build 14 week 44 2021 [ 11.725616] Bluetooth: hci0: Reading supported features failed (-16) [ 11.725623] Bluetooth: hci0: Error reading debug features [ 11.725629] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 12.005097] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 [ 12.021776] i915 0000:00:02.0: vgaarb: deactivate vga console [ 12.026105] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 12.028192] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ 13.099856] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1 [ 13.103363] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.103685] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15 [ 13.122940] fbcon: i915drmfb (fb0) is primary device [ 13.122944] fbcon: Deferring console take-over [ 13.122947] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 13.139644] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 13.178439] snd_hda_codec_conexant hdaudioC0D0: CX20724: BIOS auto-probing. [ 13.179021] snd_hda_codec_conexant hdaudioC0D0: CX20724: picked fixup for PCI SSID 103c:8079 [ 13.179300] snd_hda_codec_conexant hdaudioC0D0: vmaster hook already present before cdev! [ 13.181743] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20724: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 13.181751] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 13.181755] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 13.181758] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 13.181760] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 13.181763] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 13.181765] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 13.181767] snd_hda_codec_conexant hdaudioC0D0: Line=0x18 [ 13.218484] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 13.218555] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 13.218631] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 13.218692] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 13.218752] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 13.218812] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 13.218869] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 15.419659] kauditd_printk_skb: 125 callbacks suppressed [ 15.419663] audit: type=1400 audit(1741911603.582:137): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.configure" pid=888 comm="apparmor_parser" [ 15.423153] audit: type=1400 audit(1741911603.585:138): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.snapd-desktop-integration" pid=885 comm="apparmor_parser" [ 15.634721] audit: type=1400 audit(1741911603.797:139): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.disconnect-plug-host-hunspell" pid=890 comm="apparmor_parser" [ 15.643381] audit: type=1400 audit(1741911603.805:140): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.connect-plug-host-hunspell" pid=889 comm="apparmor_parser" [ 15.909059] audit: type=1400 audit(1741911604.071:141): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.post-refresh" pid=891 comm="apparmor_parser" [ 16.041313] audit: type=1400 audit(1741911604.203:142): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.firefox" pid=886 comm="apparmor_parser" [ 16.047470] audit: type=1400 audit(1741911604.209:143): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.geckodriver" pid=887 comm="apparmor_parser" [ 16.138189] audit: type=1400 audit(1741911604.300:144): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firmware-updater.firmware-notifier" pid=892 comm="apparmor_parser" [ 16.311079] audit: type=1400 audit(1741911604.472:145): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firmware-updater.firmware-updater" pid=893 comm="apparmor_parser" [ 16.312646] audit: type=1400 audit(1741911604.475:146): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firmware-updater.hook.configure" pid=895 comm="apparmor_parser" [ 17.025082] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.025087] Bluetooth: BNEP filters: protocol multicast [ 17.025093] Bluetooth: BNEP socket layer initialized [ 17.041834] Bluetooth: MGMT ver 1.23 [ 17.057172] NET: Registered PF_ALG protocol family [ 17.283082] loop9: detected capacity change from 0 to 8 [ 17.341287] NET: Registered PF_QIPCRTR protocol family [ 18.402482] r8152 2-2.4:1.0 enx1c61b47b81ad: carrier on [ 19.007099] systemd-journald[277]: /var/log/journal/e454872f0a7240d09e0b415a13f53b77/user-1000.journal: Journal file uses a different sequence number ID, rotating. [ 19.325241] Bluetooth: RFCOMM TTY layer initialized [ 19.325250] Bluetooth: RFCOMM socket layer initialized [ 19.325256] Bluetooth: RFCOMM ver 1.11 [ 21.001211] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 21.576077] kauditd_printk_skb: 32 callbacks suppressed [ 21.576081] audit: type=1400 audit(1741911609.738:179): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1688 comm="apparmor_parser" [ 21.645466] evm: overlay not supported [ 22.092289] Initializing XFRM netlink socket [ 22.508544] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 23.178748] rfkill: input handler disabled [ 23.306602] audit: type=1400 audit(1741911611.468:180): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=2109 comm="snap-confine" capability=12 capname="net_admin" [ 23.308636] audit: type=1400 audit(1741911611.470:181): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=2109 comm="snap-confine" capability=38 capname="perfmon" [ 23.316708] audit: type=1400 audit(1741911611.479:182): apparmor="DENIED" operation="open" class="file" profile="snap-update-ns.snapd-desktop-integration" name="/proc/2184/maps" pid=2184 comm="snap-update-ns" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 75.920558] audit: type=1400 audit(1741911664.082:183): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=2595 comm="snap-confine" capability=12 capname="net_admin" [ 75.920612] audit: type=1400 audit(1741911664.082:184): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=2595 comm="snap-confine" capability=38 capname="perfmon" [ 75.928339] audit: type=1400 audit(1741911664.090:185): apparmor="DENIED" operation="open" class="file" profile="snap-update-ns.snapd-desktop-integration" name="/proc/2727/maps" pid=2727 comm="snap-update-ns" requested_mask="r" denied_mask="r" fsuid=1003 ouid=0 [ 168.838003] r8152 2-2.4:1.0 enx1c61b47b81ad: Stop submitting intr, status -71 [ 168.855914] usb 2-2: USB disconnect, device number 2 [ 168.855919] r8152-cfgselector 2-2.4: USB disconnect, device number 3 [ 168.870749] usb 1-2: USB disconnect, device number 2 [ 171.990789] usb 1-2: new high-speed USB device number 6 using xhci_hcd [ 172.134312] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 0.02 [ 172.134319] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 172.134322] usb 1-2: Product: USB2.1 Hub [ 172.134324] usb 1-2: Manufacturer: Generic [ 172.136099] hub 1-2:1.0: USB hub found [ 172.137085] hub 1-2:1.0: 4 ports detected [ 172.237663] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd [ 172.264793] usb 2-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 0.02 [ 172.264799] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 172.264801] usb 2-2: Product: USB3.2 Hub [ 172.264803] usb 2-2: Manufacturer: Generic [ 172.269679] hub 2-2:1.0: USB hub found [ 172.271021] hub 2-2:1.0: 4 ports detected [ 172.565453] usb 2-2.4: new SuperSpeed USB device number 5 using xhci_hcd [ 172.578068] usb 2-2.4: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00 [ 172.578074] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 172.578077] usb 2-2.4: Product: USB 10/100/1000 LAN [ 172.578092] usb 2-2.4: Manufacturer: TP-Link [ 172.578094] usb 2-2.4: SerialNumber: 000001 [ 172.658862] r8152-cfgselector 2-2.4: reset SuperSpeed USB device number 5 using xhci_hcd [ 172.740515] r8152 2-2.4:1.0 eth0: v1.12.13 [ 172.772510] r8152 2-2.4:1.0 enx1c61b47b81ad: renamed from eth0 [ 175.726314] r8152 2-2.4:1.0 enx1c61b47b81ad: carrier on drivers/hwmon/pmbus/tps53679.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-)