@@ -1848,35 +1848,6 @@ config ZBOOT_ROM
Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N.
-choice
- prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
- depends on ZBOOT_ROM && ARCH_SH7372
- default ZBOOT_ROM_NONE
- help
- Include experimental SD/MMC loading code in the ROM-able zImage.
- With this enabled it is possible to write the ROM-able zImage
- kernel image to an MMC or SD card and boot the kernel straight
- from the reset vector. At reset the processor Mask ROM will load
- the first part of the ROM-able zImage which in turn loads the
- rest the kernel image to RAM.
-
-config ZBOOT_ROM_NONE
- bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
- help
- Do not load image from SD or MMC
-
-config ZBOOT_ROM_MMCIF
- bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
- help
- Load image from MMCIF hardware block.
-
-config ZBOOT_ROM_SH_MOBILE_SDHI
- bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
- help
- Load image from SDHI hardware block
-
-endchoice
-
config ARM_APPENDED_DTB
bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
depends on OF
@@ -6,21 +6,6 @@
OBJS =
-# Ensure that MMCIF loader code appears early in the image
-# to minimise that number of bocks that have to be read in
-# order to load it.
-ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
-OBJS += mmcif-sh7372.o
-endif
-
-# Ensure that SDHI loader code appears early in the image
-# to minimise that number of bocks that have to be read in
-# order to load it.
-ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y)
-OBJS += sdhi-shmobile.o
-OBJS += sdhi-sh7372.o
-endif
-
AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
HEAD = head.o
OBJS += misc.o decompress.o
@@ -25,36 +25,6 @@
/* load board-specific initialization code */
#include <mach/zboot.h>
-#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI)
- /* Load image from MMC/SD */
- adr sp, __tmp_stack + 256
- ldr r0, __image_start
- ldr r1, __image_end
- subs r1, r1, r0
- ldr r0, __load_base
- bl mmc_loader
-
- /* Jump to loaded code */
- ldr r0, __loaded
- ldr r1, __image_start
- sub r0, r0, r1
- ldr r1, __load_base
- add pc, r0, r1
-
-__image_start:
- .long _start
-__image_end:
- .long _got_end
-__load_base:
- .long MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
-__loaded:
- .long __continue
- .align
-__tmp_stack:
- .space 256
-__continue:
-#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
-
adr r0, dtb_info
ldmia r0, {r1, r3, r4, r5, r7}
deleted file mode 100644
@@ -1,88 +0,0 @@
-/*
- * sh7372 MMCIF loader
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/boot.h>
-#include <mach/mmc.h>
-
-#define MMCIF_BASE (void __iomem *)0xe6bd0000
-
-#define PORT84CR (void __iomem *)0xe6050054
-#define PORT85CR (void __iomem *)0xe6050055
-#define PORT86CR (void __iomem *)0xe6050056
-#define PORT87CR (void __iomem *)0xe6050057
-#define PORT88CR (void __iomem *)0xe6050058
-#define PORT89CR (void __iomem *)0xe6050059
-#define PORT90CR (void __iomem *)0xe605005a
-#define PORT91CR (void __iomem *)0xe605005b
-#define PORT92CR (void __iomem *)0xe605005c
-#define PORT99CR (void __iomem *)0xe6050063
-
-#define SMSTPCR3 (void __iomem *)0xe615013c
-
-/* SH7372 specific MMCIF loader
- *
- * loads the zImage from an MMC card starting from block 1.
- *
- * The image must be start with a vrl4 header and
- * the zImage must start at offset 512 of the image. That is,
- * at block 2 (=byte 1024) on the media
- *
- * Use the following line to write the vrl4 formated zImage
- * to an MMC card
- * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
- */
-asmlinkage void mmc_loader(unsigned char *buf, unsigned long len)
-{
- mmc_init_progress();
- mmc_update_progress(MMC_PROGRESS_ENTER);
-
- /* Initialise MMC
- * registers: PORT84CR-PORT92CR
- * (MMCD0_0-MMCD0_7,MMCCMD0 Control)
- * value: 0x04 - select function 4
- */
- __raw_writeb(0x04, PORT84CR);
- __raw_writeb(0x04, PORT85CR);
- __raw_writeb(0x04, PORT86CR);
- __raw_writeb(0x04, PORT87CR);
- __raw_writeb(0x04, PORT88CR);
- __raw_writeb(0x04, PORT89CR);
- __raw_writeb(0x04, PORT90CR);
- __raw_writeb(0x04, PORT91CR);
- __raw_writeb(0x04, PORT92CR);
-
- /* Initialise MMC
- * registers: PORT99CR (MMCCLK0 Control)
- * value: 0x10 | 0x04 - enable output | select function 4
- */
- __raw_writeb(0x14, PORT99CR);
-
- /* Enable clock to MMC hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
-
- mmc_update_progress(MMC_PROGRESS_INIT);
-
- /* setup MMCIF hardware */
- sh_mmcif_boot_init(MMCIF_BASE);
-
- mmc_update_progress(MMC_PROGRESS_LOAD);
-
- /* load kernel via MMCIF interface */
- sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
- (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);
-
-
- /* Disable clock to MMC hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3);
-
- mmc_update_progress(MMC_PROGRESS_DONE);
-}
deleted file mode 100644
@@ -1,95 +0,0 @@
-/*
- * SuperH Mobile SDHI
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Kuninori Morimoto
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Parts inspired by u-boot
- */
-
-#include <linux/io.h>
-#include <mach/mmc.h>
-#include <linux/mmc/boot.h>
-#include <linux/mmc/tmio.h>
-
-#include "sdhi-shmobile.h"
-
-#define PORT179CR 0xe60520b3
-#define PORT180CR 0xe60520b4
-#define PORT181CR 0xe60520b5
-#define PORT182CR 0xe60520b6
-#define PORT183CR 0xe60520b7
-#define PORT184CR 0xe60520b8
-
-#define SMSTPCR3 0xe615013c
-
-#define CR_INPUT_ENABLE 0x10
-#define CR_FUNCTION1 0x01
-
-#define SDHI1_BASE (void __iomem *)0xe6860000
-#define SDHI_BASE SDHI1_BASE
-
-/* SuperH Mobile SDHI loader
- *
- * loads the zImage from an SD card starting from block 0
- * on physical partition 1
- *
- * The image must be start with a vrl4 header and
- * the zImage must start at offset 512 of the image. That is,
- * at block 1 (=byte 512) of physical partition 1
- *
- * Use the following line to write the vrl4 formated zImage
- * to an SD card
- * # dd if=vrl4.out of=/dev/sdx bs=512
- */
-asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
-{
- int high_capacity;
-
- mmc_init_progress();
-
- mmc_update_progress(MMC_PROGRESS_ENTER);
- /* Initialise SDHI1 */
- /* PORT184CR: GPIO_FN_SDHICMD1 Control */
- __raw_writeb(CR_FUNCTION1, PORT184CR);
- /* PORT179CR: GPIO_FN_SDHICLK1 Control */
- __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
- /* PORT181CR: GPIO_FN_SDHID1_3 Control */
- __raw_writeb(CR_FUNCTION1, PORT183CR);
- /* PORT182CR: GPIO_FN_SDHID1_2 Control */
- __raw_writeb(CR_FUNCTION1, PORT182CR);
- /* PORT183CR: GPIO_FN_SDHID1_1 Control */
- __raw_writeb(CR_FUNCTION1, PORT181CR);
- /* PORT180CR: GPIO_FN_SDHID1_0 Control */
- __raw_writeb(CR_FUNCTION1, PORT180CR);
-
- /* Enable clock to SDHI1 hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
-
- /* setup SDHI hardware */
- mmc_update_progress(MMC_PROGRESS_INIT);
- high_capacity = sdhi_boot_init(SDHI_BASE);
- if (high_capacity < 0)
- goto err;
-
- mmc_update_progress(MMC_PROGRESS_LOAD);
- /* load kernel */
- if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
- 0, /* Kernel is at block 1 */
- (len + TMIO_BBS - 1) / TMIO_BBS, buf))
- goto err;
-
- /* Disable clock to SDHI1 hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
-
- mmc_update_progress(MMC_PROGRESS_DONE);
-
- return;
-err:
- for(;;);
-}
deleted file mode 100644
@@ -1,449 +0,0 @@
-/*
- * SuperH Mobile SDHI
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Kuninori Morimoto
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Parts inspired by u-boot
- */
-
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/core.h>
-#include <linux/mmc/mmc.h>
-#include <linux/mmc/sd.h>
-#include <linux/mmc/tmio.h>
-#include <mach/sdhi.h>
-
-#define OCR_FASTBOOT (1<<29)
-#define OCR_HCS (1<<30)
-#define OCR_BUSY (1<<31)
-
-#define RESP_CMD12 0x00000030
-
-static inline u16 sd_ctrl_read16(void __iomem *base, int addr)
-{
- return __raw_readw(base + addr);
-}
-
-static inline u32 sd_ctrl_read32(void __iomem *base, int addr)
-{
- return __raw_readw(base + addr) |
- __raw_readw(base + addr + 2) << 16;
-}
-
-static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val)
-{
- __raw_writew(val, base + addr);
-}
-
-static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val)
-{
- __raw_writew(val, base + addr);
- __raw_writew(val >> 16, base + addr + 2);
-}
-
-#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL | \
- TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT | \
- TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN | \
- TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS | \
- TMIO_STAT_ILL_FUNC)
-
-static int sdhi_intr(void __iomem *base)
-{
- unsigned long state = sd_ctrl_read32(base, CTL_STATUS);
-
- if (state & ALL_ERROR) {
- sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR);
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- ALL_ERROR |
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- return -EINVAL;
- }
- if (state & TMIO_STAT_CMDRESPEND) {
- sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- TMIO_STAT_CMDRESPEND |
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- return 0;
- }
- if (state & TMIO_STAT_RXRDY) {
- sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY);
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN |
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- return 0;
- }
- if (state & TMIO_STAT_DATAEND) {
- sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND);
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- TMIO_STAT_DATAEND |
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- return 0;
- }
-
- return -EAGAIN;
-}
-
-static int sdhi_boot_wait_resp_end(void __iomem *base)
-{
- int err = -EAGAIN, timeout = 10000000;
-
- while (timeout--) {
- err = sdhi_intr(base);
- if (err != -EAGAIN)
- break;
- udelay(1);
- }
-
- return err;
-}
-
-/* SDHI_CLK_CTRL */
-#define CLK_MMC_ENABLE (1 << 8)
-#define CLK_MMC_INIT (1 << 6) /* clk / 256 */
-
-static void sdhi_boot_mmc_clk_stop(void __iomem *base)
-{
- sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000);
- msleep(10);
- sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE &
- sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
- msleep(10);
-}
-
-static void sdhi_boot_mmc_clk_start(void __iomem *base)
-{
- sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE |
- sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
- msleep(10);
- sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE);
- msleep(10);
-}
-
-static void sdhi_boot_reset(void __iomem *base)
-{
- sd_ctrl_write16(base, CTL_RESET_SD, 0x0000);
- msleep(10);
- sd_ctrl_write16(base, CTL_RESET_SD, 0x0001);
- msleep(10);
-}
-
-/* Set MMC clock / power.
- * Note: This controller uses a simple divider scheme therefore it cannot
- * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
- * MMC wont run that fast, it has to be clocked at 12MHz which is the next
- * slowest setting.
- */
-static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios)
-{
- if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY)
- return -EBUSY;
-
- if (ios->clock)
- sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL,
- ios->clock | CLK_MMC_ENABLE);
-
- /* Power sequence - OFF -> ON -> UP */
- switch (ios->power_mode) {
- case MMC_POWER_OFF: /* power down SD bus */
- sdhi_boot_mmc_clk_stop(base);
- break;
- case MMC_POWER_ON: /* power up SD bus */
- break;
- case MMC_POWER_UP: /* start bus clock */
- sdhi_boot_mmc_clk_start(base);
- break;
- }
-
- switch (ios->bus_width) {
- case MMC_BUS_WIDTH_1:
- sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0);
- break;
- case MMC_BUS_WIDTH_4:
- sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0);
- break;
- }
-
- /* Let things settle. delay taken from winCE driver */
- udelay(140);
-
- return 0;
-}
-
-/* These are the bitmasks the tmio chip requires to implement the MMC response
- * types. Note that R1 and R6 are the same in this scheme. */
-#define RESP_NONE 0x0300
-#define RESP_R1 0x0400
-#define RESP_R1B 0x0500
-#define RESP_R2 0x0600
-#define RESP_R3 0x0700
-#define DATA_PRESENT 0x0800
-#define TRANSFER_READ 0x1000
-
-static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd)
-{
- int err, c = cmd->opcode;
-
- switch (mmc_resp_type(cmd)) {
- case MMC_RSP_NONE: c |= RESP_NONE; break;
- case MMC_RSP_R1: c |= RESP_R1; break;
- case MMC_RSP_R1B: c |= RESP_R1B; break;
- case MMC_RSP_R2: c |= RESP_R2; break;
- case MMC_RSP_R3: c |= RESP_R3; break;
- default:
- return -EINVAL;
- }
-
- /* No interrupts so this may not be cleared */
- sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
-
- sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND |
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg);
- sd_ctrl_write16(base, CTL_SD_CMD, c);
-
-
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- ~(TMIO_STAT_CMDRESPEND | ALL_ERROR) &
- sd_ctrl_read32(base, CTL_IRQ_MASK));
-
- err = sdhi_boot_wait_resp_end(base);
- if (err)
- return err;
-
- cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE);
-
- return 0;
-}
-
-static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity,
- unsigned long block, unsigned short *buf)
-{
- int err, i;
-
- /* CMD17 - Read */
- {
- struct mmc_command cmd;
-
- cmd.opcode = MMC_READ_SINGLE_BLOCK | \
- TRANSFER_READ | DATA_PRESENT;
- if (high_capacity)
- cmd.arg = block;
- else
- cmd.arg = block * TMIO_BBS;
- cmd.flags = MMC_RSP_R1;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- }
-
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- ~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY |
- TMIO_STAT_TXUNDERRUN) &
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- err = sdhi_boot_wait_resp_end(base);
- if (err)
- return err;
-
- sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS);
- for (i = 0; i < TMIO_BBS / sizeof(*buf); i++)
- *buf++ = sd_ctrl_read16(base, RESP_CMD12);
-
- err = sdhi_boot_wait_resp_end(base);
- if (err)
- return err;
-
- return 0;
-}
-
-int sdhi_boot_do_read(void __iomem *base, int high_capacity,
- unsigned long offset, unsigned short count,
- unsigned short *buf)
-{
- unsigned long i;
- int err = 0;
-
- for (i = 0; i < count; i++) {
- err = sdhi_boot_do_read_single(base, high_capacity, offset + i,
- buf + (i * TMIO_BBS /
- sizeof(*buf)));
- if (err)
- return err;
- }
-
- return 0;
-}
-
-#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34)
-
-int sdhi_boot_init(void __iomem *base)
-{
- bool sd_v2 = false, sd_v1_0 = false;
- unsigned short cid;
- int err, high_capacity = 0;
-
- sdhi_boot_mmc_clk_stop(base);
- sdhi_boot_reset(base);
-
- /* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */
- {
- struct mmc_ios ios;
- ios.power_mode = MMC_POWER_ON;
- ios.bus_width = MMC_BUS_WIDTH_1;
- ios.clock = CLK_MMC_INIT;
- err = sdhi_boot_mmc_set_ios(base, &ios);
- if (err)
- return err;
- }
-
- /* CMD0 */
- {
- struct mmc_command cmd;
- msleep(1);
- cmd.opcode = MMC_GO_IDLE_STATE;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_NONE;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- msleep(2);
- }
-
- /* CMD8 - Test for SD version 2 */
- {
- struct mmc_command cmd;
- cmd.opcode = SD_SEND_IF_COND;
- cmd.arg = (VOLTAGES != 0) << 8 | 0xaa;
- cmd.flags = MMC_RSP_R1;
- err = sdhi_boot_request(base, &cmd); /* Ignore error */
- if ((cmd.resp[0] & 0xff) == 0xaa)
- sd_v2 = true;
- }
-
- /* CMD55 - Get OCR (SD) */
- {
- int timeout = 1000;
- struct mmc_command cmd;
-
- cmd.arg = 0;
-
- do {
- cmd.opcode = MMC_APP_CMD;
- cmd.flags = MMC_RSP_R1;
- cmd.arg = 0;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- break;
-
- cmd.opcode = SD_APP_OP_COND;
- cmd.flags = MMC_RSP_R3;
- cmd.arg = (VOLTAGES & 0xff8000);
- if (sd_v2)
- cmd.arg |= OCR_HCS;
- cmd.arg |= OCR_FASTBOOT;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- break;
-
- msleep(1);
- } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
-
- if (!err && timeout) {
- if (!sd_v2)
- sd_v1_0 = true;
- high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
- }
- }
-
- /* CMD1 - Get OCR (MMC) */
- if (!sd_v2 && !sd_v1_0) {
- int timeout = 1000;
- struct mmc_command cmd;
-
- do {
- cmd.opcode = MMC_SEND_OP_COND;
- cmd.arg = VOLTAGES | OCR_HCS;
- cmd.flags = MMC_RSP_R3;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
-
- msleep(1);
- } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
-
- if (!timeout)
- return -EAGAIN;
-
- high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
- }
-
- /* CMD2 - Get CID */
- {
- struct mmc_command cmd;
- cmd.opcode = MMC_ALL_SEND_CID;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R2;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- }
-
- /* CMD3
- * MMC: Set the relative address
- * SD: Get the relative address
- * Also puts the card into the standby state
- */
- {
- struct mmc_command cmd;
- cmd.opcode = MMC_SET_RELATIVE_ADDR;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R1;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- cid = cmd.resp[0] >> 16;
- }
-
- /* CMD9 - Get CSD */
- {
- struct mmc_command cmd;
- cmd.opcode = MMC_SEND_CSD;
- cmd.arg = cid << 16;
- cmd.flags = MMC_RSP_R2;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- }
-
- /* CMD7 - Select the card */
- {
- struct mmc_command cmd;
- cmd.opcode = MMC_SELECT_CARD;
- //cmd.arg = rca << 16;
- cmd.arg = cid << 16;
- //cmd.flags = MMC_RSP_R1B;
- cmd.flags = MMC_RSP_R1;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- }
-
- /* CMD16 - Set the block size */
- {
- struct mmc_command cmd;
- cmd.opcode = MMC_SET_BLOCKLEN;
- cmd.arg = TMIO_BBS;
- cmd.flags = MMC_RSP_R1;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- }
-
- return high_capacity;
-}
deleted file mode 100644
@@ -1,11 +0,0 @@
-#ifndef SDHI_MOBILE_H
-#define SDHI_MOBILE_H
-
-#include <linux/compiler.h>
-
-int sdhi_boot_do_read(void __iomem *base, int high_capacity,
- unsigned long offset, unsigned short count,
- unsigned short *buf);
-int sdhi_boot_init(void __iomem *base);
-
-#endif
deleted file mode 100644
@@ -1,11 +0,0 @@
-#ifndef MMC_H
-#define MMC_H
-
-/**************************************************
- *
- * board specific settings
- *
- **************************************************/
-
-#error "unsupported board."
-#endif /* MMC_H */
deleted file mode 100644
@@ -1,21 +0,0 @@
-#ifndef SDHI_SH7372_H
-#define SDHI_SH7372_H
-
-#define SDGENCNTA 0xfe40009c
-
-/* The countdown of SDGENCNTA is controlled by
- * ZB3D2CLK which runs at 149.5MHz.
- * That is 149.5ticks/us. Approximate this as 150ticks/us.
- */
-static void udelay(int us)
-{
- __raw_writel(us * 150, SDGENCNTA);
- while(__raw_readl(SDGENCNTA)) ;
-}
-
-static void msleep(int ms)
-{
- udelay(ms * 1000);
-}
-
-#endif
deleted file mode 100644
@@ -1,16 +0,0 @@
-#ifndef SDHI_H
-#define SDHI_H
-
-/**************************************************
- *
- * CPU specific settings
- *
- **************************************************/
-
-#ifdef CONFIG_ARCH_SH7372
-#include "mach/sdhi-sh7372.h"
-#else
-#error "unsupported CPU."
-#endif
-
-#endif /* SDHI_H */