diff mbox

[v2] sh_tmu: compute mult and shift before registration

Message ID 1275342348-22499-1-git-send-email-aurelien@aurel32.net (mailing list archive)
State Accepted
Commit 66f49121ffa41a19c59965b31b046d8368fec3c7
Headers show

Commit Message

Aurelien Jarno May 31, 2010, 9:45 p.m. UTC
None
diff mbox

Patch

diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 8e44e14..de71590 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -199,16 +199,8 @@  static cycle_t sh_tmu_clocksource_read(struct clocksource *cs)
 static int sh_tmu_clocksource_enable(struct clocksource *cs)
 {
 	struct sh_tmu_priv *p = cs_to_sh_tmu(cs);
-	int ret;
-
-	ret = sh_tmu_enable(p);
-	if (ret)
-		return ret;
 
-	/* TODO: calculate good shift from rate and counter bit width */
-	cs->shift = 10;
-	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
-	return 0;
+	return sh_tmu_enable(p);
 }
 
 static void sh_tmu_clocksource_disable(struct clocksource *cs)
@@ -228,6 +220,16 @@  static int sh_tmu_register_clocksource(struct sh_tmu_priv *p,
 	cs->disable = sh_tmu_clocksource_disable;
 	cs->mask = CLOCKSOURCE_MASK(32);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	/* clk_get_rate() needs an enabled clock */
+	clk_enable(p->clk);
+	/* channel will be configured at parent clock / 4 */
+	p->rate = clk_get_rate(p->clk) / 4;
+	clk_disable(p->clk);
+	/* TODO: calculate good shift from rate and counter bit width */
+	cs->shift = 10;
+	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+
 	dev_info(&p->pdev->dev, "used as clock source\n");
 	clocksource_register(cs);
 	return 0;