@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
r8a7740-armadillo800eva.dtb \
+ r8a7740-armadillo800eva-reference.dtb \
sh73a0-kzm9g.dtb \
sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
new file mode 100644
@@ -0,0 +1,33 @@
+/*
+ * Reference Device Tree Source for the armadillo 800 eva board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7740.dtsi"
+
+/ {
+ model = "armadillo 800 eva";
+ compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x20000000>;
+ };
+
+ sh-eth@e9a00000 {
+ compatible = "renesas,sh-eth";
+ interrupt-parent = <&intca>;
+ reg = <0xe9a00000 0x800>, <0xe9a01800 0x800>;
+ interrupts = <0x500>;
+ phy-mode = "mii";
+ sh-eth,edmac-endian = "little";
+ sh-eth,register-type = "gigabit";
+ sh-eth,phy-id = <0>;
+ };
+};
@@ -96,6 +96,16 @@ config MACH_ARMADILLO800EVA
select SND_SOC_WM8978 if SND_SIMPLE_CARD
select USE_OF
+config MACH_ARMADILLO800EVA_REFERENCE
+ bool "Armadillo-800 EVA board - Reference Device Tree Implementation"
+ depends on MACH_ARMADILLO800EVA
+ ---help---
+ Use reference implementation of Aramdillo800 EVA board support
+ which makes a greater use of device tree at the expense
+ of not supporting a number of devices.
+
+ This is intended to aid developers
+
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
@@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_KOTA2) += board-kota2.o
obj-$(CONFIG_MACH_BONITO) += board-bonito.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
+obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
new file mode 100644
@@ -0,0 +1,172 @@
+/*
+ * armadillo 800 eva board support - Interim Reference Device Tree Implementation
+ * This will be merged to board-armadillo800eva.c when DT support is complete
+ *
+ * Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
+ *
+ * based on the reference implementation of the board kzm9g from Simon Horman
+ * and board-armadilloeva800.c
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/r8a7740.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+
+/*
+ * CON1 Camera Module
+ * CON2 Extension Bus
+ * CON3 HDMI Output
+ * CON4 Composite Video Output
+ * CON5 H-UDI JTAG
+ * CON6 ARM JTAG
+ * CON7 SD1
+ * CON8 SD2
+ * CON9 RTC BackUp
+ * CON10 Monaural Mic Input
+ * CON11 Stereo Headphone Output
+ * CON12 Audio Line Output(L)
+ * CON13 Audio Line Output(R)
+ * CON14 AWL13 Module
+ * CON15 Extension
+ * CON16 LCD1
+ * CON17 LCD2
+ * CON19 Power Input
+ * CON20 USB1
+ * CON21 USB2
+ * CON22 Serial
+ * CON23 LAN
+ * CON24 USB3
+ * LED1 Camera LED(Yellow)
+ * LED2 Power LED (Green)
+ * ED3-LED6 User LED(Yellow)
+ * LED7 LAN link LED(Green)
+ * LED8 LAN activity LED(Yellow)
+ */
+
+/*
+ * DipSwitch
+ *
+ * SW1
+ *
+ * -12345678-+---------------+----------------------------
+ * 1 | boot | hermit
+ * 0 | boot | OS auto boot
+ * -12345678-+---------------+----------------------------
+ * 00 | boot device | eMMC
+ * 10 | boot device | SDHI0 (CON7)
+ * 01 | boot device | -
+ * 11 | boot device | Extension Buss (CS0)
+ * -12345678-+---------------+----------------------------
+ * 0 | Extension Bus | D8-D15 disable, eMMC enable
+ * 1 | Extension Bus | D8-D15 enable, eMMC disable
+ * -12345678-+---------------+----------------------------
+ * 0 | SDHI1 | COM8 disable, COM14 enable
+ * 1 | SDHI1 | COM8 enable, COM14 disable
+ * -12345678-+---------------+----------------------------
+ * 0 | USB0 | COM20 enable, COM24 disable
+ * 1 | USB0 | COM20 disable, COM24 enable
+ * -12345678-+---------------+----------------------------
+ * 00 | JTAG | SH-X2
+ * 10 | JTAG | ARM
+ * 01 | JTAG | -
+ * 11 | JTAG | Boundary Scan
+ *-----------+---------------+----------------------------
+ */
+
+/*
+ * FSI-WM8978
+ *
+ * this command is required when playback.
+ *
+ * # amixer set "Headphone" 50
+ */
+
+/*
+ * board init
+ */
+static void __init eva_init(void)
+{
+ r8a7740_pinmux_init();
+ r8a7740_meram_workaround();
+
+ /* SCIFA1 */
+ gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
+ gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
+
+ /* GETHER */
+ gpio_request(GPIO_FN_ET_CRS, NULL);
+ gpio_request(GPIO_FN_ET_MDC, NULL);
+ gpio_request(GPIO_FN_ET_MDIO, NULL);
+ gpio_request(GPIO_FN_ET_TX_ER, NULL);
+ gpio_request(GPIO_FN_ET_RX_ER, NULL);
+ gpio_request(GPIO_FN_ET_ERXD0, NULL);
+ gpio_request(GPIO_FN_ET_ERXD1, NULL);
+ gpio_request(GPIO_FN_ET_ERXD2, NULL);
+ gpio_request(GPIO_FN_ET_ERXD3, NULL);
+ gpio_request(GPIO_FN_ET_TX_CLK, NULL);
+ gpio_request(GPIO_FN_ET_TX_EN, NULL);
+ gpio_request(GPIO_FN_ET_ETXD0, NULL);
+ gpio_request(GPIO_FN_ET_ETXD1, NULL);
+ gpio_request(GPIO_FN_ET_ETXD2, NULL);
+ gpio_request(GPIO_FN_ET_ETXD3, NULL);
+ gpio_request(GPIO_FN_ET_PHY_INT, NULL);
+ gpio_request(GPIO_FN_ET_COL, NULL);
+ gpio_request(GPIO_FN_ET_RX_DV, NULL);
+ gpio_request(GPIO_FN_ET_RX_CLK, NULL);
+
+ gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
+ gpio_direction_output(GPIO_PORT18, 1);
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Early BRESP enable, Shared attribute override enable, 32K*8way */
+ l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
+#endif
+
+ r8a7740_add_standard_devices_dt();
+}
+
+#define RESCNT2 IOMEM(0xe6188020)
+static void eva_restart(char mode, const char *cmd)
+{
+ /* Do soft power on reset */
+ writel((1 << 31), RESCNT2);
+}
+
+static const char *eva_boards_compat_dt[] __initdata = {
+ "renesas,armadillo800eva-reference",
+ NULL,
+};
+
+DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
+ .map_io = r8a7740_map_io,
+ .init_early = r8a7740_add_early_devices_dt,
+ .init_irq = r8a7740_init_irq_of,
+ .nr_irqs = NR_IRQS_LEGACY,
+ .handle_irq = shmobile_handle_irq_intc,
+ .init_machine = eva_init,
+ .init_late = shmobile_init_late,
+ .timer = &shmobile_timer,
+ .dt_compat = eva_boards_compat_dt,
+ .restart = eva_restart,
+MACHINE_END
@@ -44,7 +44,9 @@ extern struct clk sh73a0_extalr_clk;
extern void r8a7740_init_irq(void);
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
+extern void r8a7740_add_early_devices_dt(void);
extern void r8a7740_add_standard_devices(void);
+extern void r8a7740_add_standard_devices_dt(void);
extern void r8a7740_clock_init(u8 md_ck);
extern void r8a7740_pinmux_init(void);
Provide alternate board code for the Armadillo 800 EVA to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. This is based on Simon Horman's reference implementation for the board kzm9g. Currently only the ethernet controller is brought up. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/r8a7740-armadillo800eva-reference.dts | 33 ++++ arch/arm/mach-shmobile/Kconfig | 10 ++ arch/arm/mach-shmobile/Makefile | 1 + .../board-armadillo800eva-reference.c | 172 ++++++++++++++++++++ arch/arm/mach-shmobile/include/mach/common.h | 2 + 6 files changed, 219 insertions(+) create mode 100644 arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts create mode 100644 arch/arm/mach-shmobile/board-armadillo800eva-reference.c