| Message ID | 1365425547-10391-2-git-send-email-hechtb+renesas@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
Hi Bastian, Thanks for the patch. On Monday 08 April 2013 14:52:27 Bastian Hecht wrote: > We no longer need to set up the reset pin for the st1232 in the board > code, but can pass the GPIO number via the platform data to the driver. > This results in a cleaner grouping of the device setup. > > Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > v2: > reset_pin changed to reset_gpio > > arch/arm/mach-shmobile/board-armadillo800eva.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c > b/arch/arm/mach-shmobile/board-armadillo800eva.c index bf4c3d2..d1c1ff4 > 100644 > --- a/arch/arm/mach-shmobile/board-armadillo800eva.c > +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c > @@ -24,6 +24,7 @@ > #include <linux/err.h> > #include <linux/kernel.h> > #include <linux/input.h> > +#include <linux/input/st1232_pdata.h> > #include <linux/irq.h> > #include <linux/platform_device.h> > #include <linux/gpio.h> > @@ -997,10 +998,15 @@ static struct platform_device i2c_gpio_device = { > }; > > /* I2C */ > +static struct st1232_pdata st1232_i2c0_pdata = { > + .reset_gpio = 166, > +}; > + > static struct i2c_board_info i2c0_devices[] = { > { > I2C_BOARD_INFO("st1232-ts", 0x55), > .irq = irq_pin(10), > + .platform_data = &st1232_i2c0_pdata, > }, > { > I2C_BOARD_INFO("wm8978", 0x1a), > @@ -1120,7 +1126,6 @@ static void __init eva_init(void) > > /* Touchscreen */ > gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ > - gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ > > /* GETHER */ > gpio_request(GPIO_FN_ET_CRS, NULL);
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index bf4c3d2..d1c1ff4 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -24,6 +24,7 @@ #include <linux/err.h> #include <linux/kernel.h> #include <linux/input.h> +#include <linux/input/st1232_pdata.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/gpio.h> @@ -997,10 +998,15 @@ static struct platform_device i2c_gpio_device = { }; /* I2C */ +static struct st1232_pdata st1232_i2c0_pdata = { + .reset_gpio = 166, +}; + static struct i2c_board_info i2c0_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), .irq = irq_pin(10), + .platform_data = &st1232_i2c0_pdata, }, { I2C_BOARD_INFO("wm8978", 0x1a), @@ -1120,7 +1126,6 @@ static void __init eva_init(void) /* Touchscreen */ gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ - gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ /* GETHER */ gpio_request(GPIO_FN_ET_CRS, NULL);
We no longer need to set up the reset pin for the st1232 in the board code, but can pass the GPIO number via the platform data to the driver. This results in a cleaner grouping of the device setup. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> --- v2: reset_pin changed to reset_gpio arch/arm/mach-shmobile/board-armadillo800eva.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)