From patchwork Fri Jan 24 08:44:04 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Geert Uytterhoeven X-Patchwork-Id: 3533511 Return-Path: X-Original-To: patchwork-linux-sh@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 26A389F377 for ; Fri, 24 Jan 2014 08:48:13 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id AA93420179 for ; Fri, 24 Jan 2014 08:48:11 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id BC35420181 for ; Fri, 24 Jan 2014 08:48:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752731AbaAXIro (ORCPT ); Fri, 24 Jan 2014 03:47:44 -0500 Received: from albert.telenet-ops.be ([195.130.137.90]:49571 "EHLO albert.telenet-ops.be" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752409AbaAXIoS (ORCPT ); Fri, 24 Jan 2014 03:44:18 -0500 Received: from ayla.of.borg ([84.193.72.141]) by albert.telenet-ops.be with bizsmtp id HkkG1n00m32ts5g06kkGbA; Fri, 24 Jan 2014 09:44:16 +0100 Received: from geert by ayla.of.borg with local (Exim 4.76) (envelope-from ) id 1W6cN6-00037E-JX; Fri, 24 Jan 2014 09:44:16 +0100 From: Geert Uytterhoeven To: Mark Brown Cc: linux-spi@vger.kernel.org, linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org, Geert Uytterhoeven Subject: [PATCH 14/14] spi: rspi: Add support for Quad and Dual SPI Transfers on QSPI Date: Fri, 24 Jan 2014 09:44:04 +0100 Message-Id: <1390553044-11860-15-git-send-email-geert@linux-m68k.org> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1390553044-11860-1-git-send-email-geert@linux-m68k.org> References: <1390553044-11860-1-git-send-email-geert@linux-m68k.org> Sender: linux-sh-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-sh@vger.kernel.org X-Spam-Status: No, score=-7.5 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Geert Uytterhoeven Add support for Quad and Dual SPI Transfers on the Renesas Quad Serial Peripheral Interface, as found in R-Car Gen2 SoCs like R-Car H2 (r8a7790) and R-Car M2 (r8a7791): - Add unidirectional transfer methods for Quad/Dual SPI Transfers. - Program the sequencer to handle SPI messages with multiple transfer modes when Quad or Dual transfers are enabled for an SPI slave. Up to 4 transfer modes per SPI message are supported by the hardware. - Advertise the availability of Quad and Dual SPI modes on QSPI. Signed-off-by: Geert Uytterhoeven --- drivers/spi/spi-rspi.c | 162 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 148 insertions(+), 14 deletions(-) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index e56fcb5f7f99..34ad4bca8a41 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -2,6 +2,7 @@ * SH RSPI driver * * Copyright (C) 2012, 2013 Renesas Solutions Corp. + * Copyright (C) 2014 Glider bvba * * Based on spi-sh.c: * Copyright (C) 2011 Renesas Solutions Corp. @@ -57,6 +58,10 @@ #define RSPI_SPCMD5 0x1a /* Command Register 5 */ #define RSPI_SPCMD6 0x1c /* Command Register 6 */ #define RSPI_SPCMD7 0x1e /* Command Register 7 */ +#define RSPI_SPCMD(i) (RSPI_SPCMD0 + (i) * 2) +#define RSPI_NUM_SPCMD 8 +#define RSPI_RZ_NUM_SPCMD 4 +#define QSPI_NUM_SPCMD 4 /* RSPI on RZ only */ #define RSPI_SPBFCR 0x20 /* Buffer Control Register */ @@ -69,6 +74,7 @@ #define QSPI_SPBMUL1 0x20 /* Transfer Data Length Multiplier Setting Register 1 */ #define QSPI_SPBMUL2 0x24 /* Transfer Data Length Multiplier Setting Register 2 */ #define QSPI_SPBMUL3 0x28 /* Transfer Data Length Multiplier Setting Register 3 */ +#define QSPI_SPBMUL(i) (QSPI_SPBMUL0 + (i) * 4) /* SPCR - Control Register */ #define SPCR_SPRIE 0x80 /* Receive Interrupt Enable */ @@ -152,7 +158,7 @@ #define SPCMD_LSBF 0x1000 /* LSB First */ #define SPCMD_SPB_MASK 0x0f00 /* Data Length Setting */ #define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK) -#define SPCMD_SPB_8BIT 0x0000 /* qspi only */ +#define SPCMD_SPB_8BIT 0x0000 /* QSPI only */ #define SPCMD_SPB_16BIT 0x0100 #define SPCMD_SPB_20BIT 0x0000 #define SPCMD_SPB_24BIT 0x0100 @@ -245,6 +251,7 @@ struct spi_ops { int (*set_config_register)(struct rspi_data *rspi, int access_size); int (*transfer_one)(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer); + u16 mode_bits; }; /* @@ -274,8 +281,8 @@ static int rspi_set_config_register(struct rspi_data *rspi, int access_size) rspi_write8(rspi, 0x00, RSPI_SPCR2); /* Sets SPCMD */ - rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | rspi->spcmd, - RSPI_SPCMD0); + rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size); + rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); /* Sets RSPI mode */ rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR); @@ -321,7 +328,6 @@ static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size) */ static int qspi_set_config_register(struct rspi_data *rspi, int access_size) { - u16 spcmd; int spbr; /* Sets output mode, MOSI signal, and (optionally) loopback */ @@ -342,13 +348,13 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size) /* Data Length Setting */ if (access_size == 8) - spcmd = SPCMD_SPB_8BIT; + rspi->spcmd |= SPCMD_SPB_8BIT; else if (access_size == 16) - spcmd = SPCMD_SPB_16BIT; + rspi->spcmd |= SPCMD_SPB_16BIT; else - spcmd = SPCMD_SPB_32BIT; + rspi->spcmd |= SPCMD_SPB_32BIT; - spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | rspi->spcmd | SPCMD_SPNDEN; + rspi->spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SPNDEN; /* Resets transfer data length */ rspi_write32(rspi, 0, QSPI_SPBMUL0); @@ -359,9 +365,9 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size) rspi_write8(rspi, 0x00, QSPI_SPBFCR); /* Sets SPCMD */ - rspi_write16(rspi, spcmd, RSPI_SPCMD0); + rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); - /* Enables SPI function in a master mode */ + /* Enables SPI function in master mode */ rspi_write8(rspi, SPCR_SPE | SPCR_MSTR, RSPI_SPCR); return 0; @@ -811,12 +817,55 @@ static int qspi_transfer_out_in(struct rspi_data *rspi, return 0; } +static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer) +{ + const u8 *buf = xfer->tx_buf; + unsigned int i; + int ret; + + for (i = 0; i < xfer->len; i++) { + ret = rspi_data_out(rspi, *buf++); + if (ret < 0) + return ret; + } + + /* Wait for the last transmission */ + rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); + + return 0; +} + +static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer) +{ + u8 *buf = xfer->rx_buf; + unsigned int i; + int ret; + + for (i = 0; i < xfer->len; i++) { + ret = rspi_data_in(rspi); + if (ret < 0) + return ret; + *buf++ = ret; + } + + return 0; +} + static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer) { struct rspi_data *rspi = spi_master_get_devdata(master); - return qspi_transfer_out_in(rspi, xfer); + if (xfer->tx_buf && xfer->tx_nbits > SPI_NBITS_SINGLE) { + /* Quad or Dual SPI Write */ + return qspi_transfer_out(rspi, xfer); + } else if (xfer->rx_buf && xfer->rx_nbits > SPI_NBITS_SINGLE) { + /* Quad or Dual SPI Read */ + return qspi_transfer_in(rspi, xfer); + } else { + /* Single SPI Transfer */ + return qspi_transfer_out_in(rspi, xfer); + } } static int rspi_setup(struct spi_device *spi) @@ -845,21 +894,101 @@ static void rspi_cleanup(struct spi_device *spi) { } +static u16 qspi_transfer_mode(const struct spi_transfer *xfer) +{ + if (xfer->tx_buf) + switch (xfer->tx_nbits) { + case SPI_NBITS_QUAD: + return SPCMD_SPIMOD_QUAD; + case SPI_NBITS_DUAL: + return SPCMD_SPIMOD_DUAL; + default: + return 0; + } + if (xfer->rx_buf) + switch (xfer->rx_nbits) { + case SPI_NBITS_QUAD: + return SPCMD_SPIMOD_QUAD | SPCMD_SPRW; + case SPI_NBITS_DUAL: + return SPCMD_SPIMOD_DUAL | SPCMD_SPRW; + default: + return 0; + } + + return 0; +} + +static int qspi_setup_sequencer(struct rspi_data *rspi, + const struct spi_message *msg) +{ + const struct spi_transfer *xfer; + unsigned int i = 0, len = 0; + u16 current_mode = 0xffff, mode; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + mode = qspi_transfer_mode(xfer); + if (mode == current_mode) { + len += xfer->len; + continue; + } + + /* Transfer mode change */ + if (i) { + /* Set transfer data length of previous transfer */ + rspi_write32(rspi, len, QSPI_SPBMUL(i - 1)); + } + + if (i >= QSPI_NUM_SPCMD) { + dev_err(&msg->spi->dev, + "Too many different transfer modes"); + return -EINVAL; + } + + /* Program transfer mode for this transfer */ + rspi_write16(rspi, rspi->spcmd | mode, RSPI_SPCMD(i)); + current_mode = mode; + len = xfer->len; + i++; + } + if (i) { + /* Set final transfer data length and sequence length */ + rspi_write32(rspi, len, QSPI_SPBMUL(i - 1)); + rspi_write8(rspi, i - 1, RSPI_SPSCR); + } + + return 0; +} + static int rspi_prepare_message(struct spi_master *master, - struct spi_message *message) + struct spi_message *msg) { struct rspi_data *rspi = spi_master_get_devdata(master); + int ret; + if (msg->spi->mode & + (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)) { + /* Setup sequencer for messages with multiple transfer modes */ + ret = qspi_setup_sequencer(rspi, msg); + if (ret < 0) + return ret; + } + + /* Enable SPI function in master mode */ rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR); return 0; } static int rspi_unprepare_message(struct spi_master *master, - struct spi_message *message) + struct spi_message *msg) { struct rspi_data *rspi = spi_master_get_devdata(master); + /* Disable SPI function */ rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR); + + /* Reset sequencer for Single SPI Transfers */ + rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); + rspi_write8(rspi, 0, RSPI_SPSCR); return 0; } @@ -989,16 +1118,21 @@ static int rspi_remove(struct platform_device *pdev) static const struct spi_ops rspi_ops = { .set_config_register = rspi_set_config_register, .transfer_one = rspi_transfer_one, + .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, }; static const struct spi_ops rspi_rz_ops = { .set_config_register = rspi_rz_set_config_register, .transfer_one = rspi_rz_transfer_one, + .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, }; static const struct spi_ops qspi_ops = { .set_config_register = qspi_set_config_register, .transfer_one = qspi_transfer_one, + .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP | + SPI_TX_DUAL | SPI_TX_QUAD | + SPI_RX_DUAL | SPI_RX_QUAD, }; #ifdef CONFIG_OF @@ -1120,7 +1254,7 @@ static int rspi_probe(struct platform_device *pdev) master->cleanup = rspi_cleanup; master->prepare_message = rspi_prepare_message; master->unprepare_message = rspi_unprepare_message; - master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP; + master->mode_bits = ops->mode_bits; master->dev.of_node = pdev->dev.of_node; ret = platform_get_irq_byname(pdev, "rx");