| Message ID | 1393608523-17509-7-git-send-email-l.stach@pengutronix.de (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Fri, Feb 28, 2014 at 9:28 AM, Lucas Stach <l.stach@pengutronix.de> wrote: > This is the recommended method of doing the IRQ > mapping. For old devicetrees we fall back to the > previous practice. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > --- > drivers/pci/host/pcie-designware.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c > index 17ce88f79d2b..3e0c2af11528 100644 > --- a/drivers/pci/host/pcie-designware.c > +++ b/drivers/pci/host/pcie-designware.c > @@ -17,6 +17,7 @@ > #include <linux/module.h> > #include <linux/msi.h> > #include <linux/of_address.h> > +#include <linux/of_pci.h> > #include <linux/pci.h> > #include <linux/pci_regs.h> > #include <linux/types.h> > @@ -738,8 +739,13 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys) > static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) > { > struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata); > + int irq; > > - return pp->irq; > + irq = of_irq_parse_and_map_pci(dev, slot, pin); > + if (!irq) > + irq = pp->irq; > + > + return irq; > } > > static void dw_pcie_add_bus(struct pci_bus *bus) > -- > 1.8.5.3 > Lucas, Please add the following which are required (at least the second one is required) for of_irq_parse_and_map_pci() to work properly for P2P bridges. With the changes below as well as my of/irq fix (https://patchwork.kernel.org/patch/3762591/) I can now use devices behind a properly connected P2P bridge. +++ b/drivers/pci/host/pcie-designware.c @@ -493,7 +493,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp) dw_pci.nr_controllers = 1; dw_pci.private_data = (void **)&pp; - pci_common_init(&dw_pci); + pci_common_init_dev(pp->dev, &dw_pci); pci_assign_unassigned_resources(); #ifdef CONFIG_PCI_DOMAINS dw_pci.domain++; @@ -726,7 +726,7 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_s if (pp) { pp->root_bus_nr = sys->busnr; - bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops, + bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops, sys, &sys->resources); } else { bus = NULL; Thanks, Tim -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index 17ce88f79d2b..3e0c2af11528 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -17,6 +17,7 @@ #include <linux/module.h> #include <linux/msi.h> #include <linux/of_address.h> +#include <linux/of_pci.h> #include <linux/pci.h> #include <linux/pci_regs.h> #include <linux/types.h> @@ -738,8 +739,13 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys) static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata); + int irq; - return pp->irq; + irq = of_irq_parse_and_map_pci(dev, slot, pin); + if (!irq) + irq = pp->irq; + + return irq; } static void dw_pcie_add_bus(struct pci_bus *bus)
This is the recommended method of doing the IRQ mapping. For old devicetrees we fall back to the previous practice. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- drivers/pci/host/pcie-designware.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)