diff mbox

[7/8] ARM: shmobile: r8a7790: add dmac0 dmac1 nodes

Message ID 1401898455-31064-8-git-send-email-ben.dooks@codethink.co.uk (mailing list archive)
State RFC
Headers show

Commit Message

Ben Dooks June 4, 2014, 4:14 p.m. UTC
Add nodes for the SYS-DMA controllers, SYS-DMAC0 and SYS-DMAC1. These
both share the same device sources, so are wrapped in the shdma-mux
node to allow both to be used.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>

---
v2:
	- fix indentation
	- remove extra channel on dmac1
v3:
	- fix issues with naming in dt
	- remove mapping of chcr data, will be in driver
---
 arch/arm/boot/dts/r8a7790.dtsi | 72 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

Comments

Geert Uytterhoeven June 19, 2014, 10:15 a.m. UTC | #1
Hi Ben,

On Wed, Jun 4, 2014 at 6:14 PM, Ben Dooks <ben.dooks@codethink.co.uk> wrote:
> Add nodes for the SYS-DMA controllers, SYS-DMAC0 and SYS-DMAC1. These
> both share the same device sources, so are wrapped in the shdma-mux
> node to allow both to be used.
>
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>

> diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
> index e8ca55d..c63d915 100644
> --- a/arch/arm/boot/dts/r8a7790.dtsi
> +++ b/arch/arm/boot/dts/r8a7790.dtsi
> @@ -87,6 +87,78 @@
>                 };
>         };
>
> +       dma0: dma-mux@0 {
> +               compatible = "renesas,shdma-mux";
> +               #dma-cells = <1>;

Shouldn't this be "#dma-cells = <2>"? The second value holds the mid/rid value,
cfr. "[PATCH 8/8] ARM: shmobile: r8a7790: Add DMA for MMCIF1":

+ dmas = <&dma0 0xe2>, <&dma0 0xe1>;
+ dma-names = "rx", "tx";

However, the actual code in shdma_of_xlate() doesn't handle the 2nd value:

        if (dma_spec->args_count != 1)
                return NULL;

BTW, I'm also looking at
http://git.codethink.co.uk/linux.git#bjdooks/shdma-dev4.

Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e8ca55d..c63d915 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -87,6 +87,78 @@ 
 		};
 	};
 
+	dma0: dma-mux@0 {
+		compatible = "renesas,shdma-mux";
+		#dma-cells = <1>;
+		dma-channels = <30>;
+		dma-requests = <256>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sysdma0: dma-controller@e6700020 {
+			compatible = "renesas,dma-r8a7790", "renesas,dma-arm";
+			clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+			dma-channels = <15>;
+			status = "disabled";
+			reg = <0 0xe6700020 0 0xffc0>;
+			interrupt-parent = <&gic>;
+
+			interrupts =	<0 197 IRQ_TYPE_LEVEL_HIGH>, /* error */
+					<0 200 IRQ_TYPE_LEVEL_HIGH>, /* ch0 */
+					<0 201 IRQ_TYPE_LEVEL_HIGH>,
+					<0 202 IRQ_TYPE_LEVEL_HIGH>,
+					<0 203 IRQ_TYPE_LEVEL_HIGH>,
+					<0 204 IRQ_TYPE_LEVEL_HIGH>,
+					<0 205 IRQ_TYPE_LEVEL_HIGH>,
+					<0 206 IRQ_TYPE_LEVEL_HIGH>,
+					<0 207 IRQ_TYPE_LEVEL_HIGH>,
+					<0 208 IRQ_TYPE_LEVEL_HIGH>,
+					<0 209 IRQ_TYPE_LEVEL_HIGH>,
+					<0 210 IRQ_TYPE_LEVEL_HIGH>,
+					<0 211 IRQ_TYPE_LEVEL_HIGH>,
+					<0 212 IRQ_TYPE_LEVEL_HIGH>,
+					<0 213 IRQ_TYPE_LEVEL_HIGH>,
+					<0 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14";
+		};
+
+		sysdma1: dma-controller@e6720020 {
+			compatible = "renesas,dma-r8a7790";
+			clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+			dma-channels = <15>;
+			reg = <0 0xe6720020 0 0xffc0>;
+			status = "disabled";
+
+			interrupt-parent = <&gic>;
+			interrupts =  <0 220 IRQ_TYPE_LEVEL_HIGH>,
+					<0 216 IRQ_TYPE_LEVEL_HIGH>,
+					<0 217 IRQ_TYPE_LEVEL_HIGH>,
+					<0 218 IRQ_TYPE_LEVEL_HIGH>,
+					<0 219 IRQ_TYPE_LEVEL_HIGH>,
+					<0 308 IRQ_TYPE_LEVEL_HIGH>,
+					<0 309 IRQ_TYPE_LEVEL_HIGH>,
+					<0 310 IRQ_TYPE_LEVEL_HIGH>,
+					<0 311 IRQ_TYPE_LEVEL_HIGH>,
+					<0 312 IRQ_TYPE_LEVEL_HIGH>,
+					<0 313 IRQ_TYPE_LEVEL_HIGH>,
+					<0 314 IRQ_TYPE_LEVEL_HIGH>,
+					<0 315 IRQ_TYPE_LEVEL_HIGH>,
+					<0 316 IRQ_TYPE_LEVEL_HIGH>,
+					<0 317 IRQ_TYPE_LEVEL_HIGH>,
+					<0 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14";
+		};
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;