diff mbox

[6/6] ARM: shmobile: ape6evm-reference: sort dts file by address

Message ID 1410511876-9235-7-git-send-email-ulrich.hecht+renesas@gmail.com (mailing list archive)
State Accepted
Commit 70481b7e41cb8713479176e068f92f34a4466a5e
Headers show

Commit Message

Ulrich Hecht Sept. 12, 2014, 8:51 a.m. UTC
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
 arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts | 26 ++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

Comments

Simon Horman Sept. 16, 2014, 12:46 a.m. UTC | #1
On Fri, Sep 12, 2014 at 10:51:16AM +0200, Ulrich Hecht wrote:
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
> ---
>  arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts | 26 ++++++++++++-------------
>  1 file changed, 13 insertions(+), 13 deletions(-)

Thanks, this file seems very quiet so this change doesn't seem
to conflict with anything else that has been done for v3.18.
I have queued it up.
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
index a860f32..bb45a70 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
@@ -24,14 +24,11 @@ 
 		bootargs = "console=ttySC0,115200 ignore_loglevel rw";
 	};
 
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
+	lbsc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x80000000>;
 	};
 
 	vcc_mmc0: regulator@0 {
@@ -62,11 +59,14 @@ 
 		regulator-always-on;
 	};
 
-	lbsc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x80000000>;
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
 	};
 };