diff mbox

[v4,1/3] ARM: shmobile: r8a7791: add HS-USB device node

Message ID 1414147508-5556-2-git-send-email-yoshihiro.shimoda.uh@renesas.com (mailing list archive)
State Accepted
Commit 1c1fee7cbba99023a11d4d2991b56c99a3174bd4
Headers show

Commit Message

Yoshihiro Shimoda Oct. 24, 2014, 10:45 a.m. UTC 
Define the R8A7791 generic part of the HS-USB device node. It is up to the board
file to enable the device.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: fixed summary, added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
 arch/arm/boot/dts/r8a7791.dtsi |   11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 1f4b6db..51a1b84 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -637,6 +637,17 @@ 
 		status = "disabled";
 	};
 
+	hsusb: usb@e6590000 {
+		compatible = "renesas,usbhs-r8a7791";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
 	usbphy: usb-phy@e6590100 {
 		compatible = "renesas,usb-phy-r8a7791";
 		reg = <0 0xe6590100 0 0x100>;