diff mbox

[v4,2/3] ARM: shmobile: koelsch: enable HS-USB

Message ID 1414147508-5556-3-git-send-email-yoshihiro.shimoda.uh@renesas.com (mailing list archive)
State Accepted
Commit fc4a00b78c7f8a770b9608164c0c9cdd0e4e68c2
Headers show

Commit Message

Yoshihiro Shimoda Oct. 24, 2014, 10:45 a.m. UTC 
Enable HS-USB device for the Koelsch board, defining the GPIO that the driver
should check when probing (which is the ID output from MAX3355 OTG chip).

Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: added pin function/group and prop, moved device node, fixed summary,
added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts |    7 +++++++
 1 file changed, 7 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 5318463..6e63200 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -464,6 +464,13 @@ 
 	pinctrl-names = "default";
 };
 
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
 &usbphy {
 	status = "okay";
 };