From patchwork Sun Oct 26 14:11:17 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Laurent Pinchart X-Patchwork-Id: 5154601 Return-Path: X-Original-To: patchwork-linux-sh@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 92BBBC11AC for ; Sun, 26 Oct 2014 14:11:36 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id B72B4201C8 for ; Sun, 26 Oct 2014 14:11:34 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id C4C8020114 for ; Sun, 26 Oct 2014 14:11:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751725AbaJZOL3 (ORCPT ); Sun, 26 Oct 2014 10:11:29 -0400 Received: from galahad.ideasonboard.com ([185.26.127.97]:46523 "EHLO galahad.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751636AbaJZOL1 (ORCPT ); Sun, 26 Oct 2014 10:11:27 -0400 Received: from avalon.ideasonboard.com (dsl-hkibrasgw3-50ddcc-40.dhcp.inet.fi [80.221.204.40]) by galahad.ideasonboard.com (Postfix) with ESMTPSA id 1294A223CD for ; Sun, 26 Oct 2014 15:09:21 +0100 (CET) From: Laurent Pinchart To: linux-sh@vger.kernel.org Subject: [PATCH v5 12/14] ARM: shmobile: koelsch: Remove legacy C board code Date: Sun, 26 Oct 2014 16:11:17 +0200 Message-Id: <1414332679-15497-13-git-send-email-laurent.pinchart+renesas@ideasonboard.com> X-Mailer: git-send-email 2.0.4 In-Reply-To: <1414332679-15497-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com> References: <1414332679-15497-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com> Sender: linux-sh-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-sh@vger.kernel.org X-Spam-Status: No, score=-7.5 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=ham version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP All features supported by the Koelsch legacy C board code are now supported by the multiplatform code, it's thus time to say bye to the legacy code. Nobody should miss it. Signed-off-by: Laurent Pinchart --- arch/arm/configs/koelsch_defconfig | 113 ------- arch/arm/mach-shmobile/Kconfig | 6 - arch/arm/mach-shmobile/Makefile | 1 - arch/arm/mach-shmobile/board-koelsch.c | 527 --------------------------------- 4 files changed, 647 deletions(-) delete mode 100644 arch/arm/configs/koelsch_defconfig delete mode 100644 arch/arm/mach-shmobile/board-koelsch.c diff --git a/arch/arm/configs/koelsch_defconfig b/arch/arm/configs/koelsch_defconfig deleted file mode 100644 index b33d19b7f134..000000000000 --- a/arch/arm/configs/koelsch_defconfig +++ /dev/null @@ -1,113 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_R8A7791=y -CONFIG_MACH_KOELSCH=y -# CONFIG_SWP_EMULATE is not set -CONFIG_CPU_BPREDICT_DISABLE=y -CONFIG_PL310_ERRATA_588369=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_PCI=y -CONFIG_PCI_RCAR_GEN2=y -CONFIG_PCI_RCAR_GEN2_PCIE=y -CONFIG_SMP=y -CONFIG_SCHED_MC=y -CONFIG_NR_CPUS=8 -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_KEXEC=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_VFP=y -CONFIG_NEON=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_SATA_RCAR=y -CONFIG_MTD=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_SPI_NOR=y -CONFIG_EEPROM_AT24=y -CONFIG_NETDEVICES=y -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CIRRUS is not set -# CONFIG_NET_VENDOR_FARADAY is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -CONFIG_SH_ETH=y -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_SMSC is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=20 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_MUX=y -CONFIG_I2C_SH_MOBILE=y -CONFIG_I2C_RCAR=y -CONFIG_SPI=y -CONFIG_SPI_RSPI=y -CONFIG_SPI_SH_MSIOF=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_RCAR=y -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -CONFIG_RCAR_THERMAL=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_DA9210=y -CONFIG_REGULATOR_GPIO=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_PLATFORM=y -CONFIG_VIDEO_RCAR_VIN=y -# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set -CONFIG_VIDEO_ADV7180=y -# CONFIG_HID is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0df162fe5c9b..e3f404ecf17a 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -227,12 +227,6 @@ config MACH_LAGER select MICREL_PHY if SH_ETH select SND_SOC_AK4642 if SND_SIMPLE_CARD -config MACH_KOELSCH - bool "Koelsch board" - depends on ARCH_R8A7791 - select USE_OF - select MICREL_PHY if SH_ETH - config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index dcb38d5258cf..c49c4915fe74 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -69,7 +69,6 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o -obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o endif diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c deleted file mode 100644 index 7111b5c1d67b..000000000000 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ /dev/null @@ -1,527 +0,0 @@ -/* - * Koelsch board support - * - * Copyright (C) 2013 Renesas Electronics Corporation - * Copyright (C) 2013-2014 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * Copyright (C) 2014 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "common.h" -#include "irqs.h" -#include "r8a7791.h" -#include "rcar-gen2.h" - -/* DU */ -static struct rcar_du_encoder_data koelsch_du_encoders[] = { - { - .type = RCAR_DU_ENCODER_NONE, - .output = RCAR_DU_OUTPUT_LVDS0, - .connector.lvds.panel = { - .width_mm = 210, - .height_mm = 158, - .mode = { - .pixelclock = 65000000, - .hactive = 1024, - .hfront_porch = 20, - .hback_porch = 160, - .hsync_len = 136, - .vactive = 768, - .vfront_porch = 3, - .vback_porch = 29, - .vsync_len = 6, - }, - }, - }, -}; - -static const struct rcar_du_platform_data koelsch_du_pdata __initconst = { - .encoders = koelsch_du_encoders, - .num_encoders = ARRAY_SIZE(koelsch_du_encoders), -}; - -static const struct resource du_resources[] __initconst = { - DEFINE_RES_MEM(0xfeb00000, 0x40000), - DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"), - DEFINE_RES_IRQ(gic_spi(256)), - DEFINE_RES_IRQ(gic_spi(268)), -}; - -static void __init koelsch_add_du_device(void) -{ - struct platform_device_info info = { - .name = "rcar-du-r8a7791", - .id = -1, - .res = du_resources, - .num_res = ARRAY_SIZE(du_resources), - .data = &koelsch_du_pdata, - .size_data = sizeof(koelsch_du_pdata), - .dma_mask = DMA_BIT_MASK(32), - }; - - platform_device_register_full(&info); -} - -/* Ether */ -static const struct sh_eth_plat_data ether_pdata __initconst = { - .phy = 0x1, - .phy_irq = irq_pin(0), - .edmac_endian = EDMAC_LITTLE_ENDIAN, - .phy_interface = PHY_INTERFACE_MODE_RMII, - .ether_link_active_low = 1, -}; - -static const struct resource ether_resources[] __initconst = { - DEFINE_RES_MEM(0xee700000, 0x400), - DEFINE_RES_IRQ(gic_spi(162)), -}; - -static const struct platform_device_info ether_info __initconst = { - .name = "r8a7791-ether", - .id = -1, - .res = ether_resources, - .num_res = ARRAY_SIZE(ether_resources), - .data = ðer_pdata, - .size_data = sizeof(ether_pdata), - .dma_mask = DMA_BIT_MASK(32), -}; - -/* LEDS */ -static struct gpio_led koelsch_leds[] = { - { - .name = "led8", - .gpio = RCAR_GP_PIN(2, 21), - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, { - .name = "led7", - .gpio = RCAR_GP_PIN(2, 20), - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, { - .name = "led6", - .gpio = RCAR_GP_PIN(2, 19), - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, -}; - -static const struct gpio_led_platform_data koelsch_leds_pdata __initconst = { - .leds = koelsch_leds, - .num_leds = ARRAY_SIZE(koelsch_leds), -}; - -/* GPIO KEY */ -#define GPIO_KEY(c, g, d, ...) \ - { .code = c, .gpio = g, .desc = d, .active_low = 1, \ - .wakeup = 1, .debounce_interval = 20 } - -static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_4, RCAR_GP_PIN(5, 3), "SW2-pin4"), - GPIO_KEY(KEY_3, RCAR_GP_PIN(5, 2), "SW2-pin3"), - GPIO_KEY(KEY_2, RCAR_GP_PIN(5, 1), "SW2-pin2"), - GPIO_KEY(KEY_1, RCAR_GP_PIN(5, 0), "SW2-pin1"), - GPIO_KEY(KEY_G, RCAR_GP_PIN(7, 6), "SW36"), - GPIO_KEY(KEY_F, RCAR_GP_PIN(7, 5), "SW35"), - GPIO_KEY(KEY_E, RCAR_GP_PIN(7, 4), "SW34"), - GPIO_KEY(KEY_D, RCAR_GP_PIN(7, 3), "SW33"), - GPIO_KEY(KEY_C, RCAR_GP_PIN(7, 2), "SW32"), - GPIO_KEY(KEY_B, RCAR_GP_PIN(7, 1), "SW31"), - GPIO_KEY(KEY_A, RCAR_GP_PIN(7, 0), "SW30"), -}; - -static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -/* QSPI */ -static const struct resource qspi_resources[] __initconst = { - DEFINE_RES_MEM(0xe6b10000, 0x1000), - DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"), -}; - -static const struct rspi_plat_data qspi_pdata __initconst = { - .num_chipselect = 1, -}; - -/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */ -static struct mtd_partition spi_flash_part[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static const struct flash_platform_data spi_flash_data = { - .name = "m25p80", - .parts = spi_flash_part, - .nr_parts = ARRAY_SIZE(spi_flash_part), - .type = "s25fl512s", -}; - -static const struct spi_board_info spi_info[] __initconst = { - { - .modalias = "m25p80", - .platform_data = &spi_flash_data, - .mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD, - .max_speed_hz = 30000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -/* SATA0 */ -static const struct resource sata0_resources[] __initconst = { - DEFINE_RES_MEM(0xee300000, 0x2000), - DEFINE_RES_IRQ(gic_spi(105)), -}; - -static const struct platform_device_info sata0_info __initconst = { - .name = "sata-r8a7791", - .id = 0, - .res = sata0_resources, - .num_res = ARRAY_SIZE(sata0_resources), - .dma_mask = DMA_BIT_MASK(32), -}; - -/* I2C */ -static const struct resource i2c_resources[] __initconst = { - /* I2C0 */ - DEFINE_RES_MEM(0xE6508000, 0x40), - DEFINE_RES_IRQ(gic_spi(287)), - /* I2C1 */ - DEFINE_RES_MEM(0xE6518000, 0x40), - DEFINE_RES_IRQ(gic_spi(288)), - /* I2C2 */ - DEFINE_RES_MEM(0xE6530000, 0x40), - DEFINE_RES_IRQ(gic_spi(286)), - /* I2C3 */ - DEFINE_RES_MEM(0xE6540000, 0x40), - DEFINE_RES_IRQ(gic_spi(290)), - /* I2C4 */ - DEFINE_RES_MEM(0xE6520000, 0x40), - DEFINE_RES_IRQ(gic_spi(19)), - /* I2C5 */ - DEFINE_RES_MEM(0xE6528000, 0x40), - DEFINE_RES_IRQ(gic_spi(20)), -}; - -static void __init koelsch_add_i2c(unsigned idx) -{ - unsigned res_idx = idx * 2; - - BUG_ON(res_idx >= ARRAY_SIZE(i2c_resources)); - - platform_device_register_simple("i2c-rcar_gen2", idx, - i2c_resources + res_idx, 2); -} - -#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \ -static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \ - \ -static struct regulator_init_data vcc_sdhi##idx##_init_data = { \ - .constraints = { \ - .valid_ops_mask = REGULATOR_CHANGE_STATUS, \ - }, \ - .consumer_supplies = &vcc_sdhi##idx##_consumer, \ - .num_consumer_supplies = 1, \ -}; \ - \ -static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\ - .supply_name = "SDHI" #idx "Vcc", \ - .microvolts = 3300000, \ - .gpio = vdd_pin, \ - .enable_high = 1, \ - .init_data = &vcc_sdhi##idx##_init_data, \ -}; \ - \ -static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \ - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \ - \ -static struct regulator_init_data vccq_sdhi##idx##_init_data = { \ - .constraints = { \ - .input_uV = 3300000, \ - .min_uV = 1800000, \ - .max_uV = 3300000, \ - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \ - REGULATOR_CHANGE_STATUS, \ - }, \ - .consumer_supplies = &vccq_sdhi##idx##_consumer, \ - .num_consumer_supplies = 1, \ -}; \ - \ -static struct gpio vccq_sdhi##idx##_gpio = \ - { vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \ - \ -static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \ - { .value = 1800000, .gpios = 0 }, \ - { .value = 3300000, .gpios = 1 }, \ -}; \ - \ -static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\ - .supply_name = "vqmmc", \ - .gpios = &vccq_sdhi##idx##_gpio, \ - .nr_gpios = 1, \ - .states = vccq_sdhi##idx##_states, \ - .nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \ - .type = REGULATOR_VOLTAGE, \ - .init_data = &vccq_sdhi##idx##_init_data, \ -}; - -SDHI_REGULATOR(0, RCAR_GP_PIN(7, 17), RCAR_GP_PIN(2, 12)); -SDHI_REGULATOR(1, RCAR_GP_PIN(7, 18), RCAR_GP_PIN(2, 13)); -SDHI_REGULATOR(2, RCAR_GP_PIN(7, 19), RCAR_GP_PIN(2, 26)); - -/* SDHI0 */ -static struct sh_mobile_sdhi_info sdhi0_info __initdata = { - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | - MMC_CAP_POWER_OFF_CARD, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, -}; - -static struct resource sdhi0_resources[] __initdata = { - DEFINE_RES_MEM(0xee100000, 0x200), - DEFINE_RES_IRQ(gic_spi(165)), -}; - -/* SDHI1 */ -static struct sh_mobile_sdhi_info sdhi1_info __initdata = { - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | - MMC_CAP_POWER_OFF_CARD, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, -}; - -static struct resource sdhi1_resources[] __initdata = { - DEFINE_RES_MEM(0xee140000, 0x100), - DEFINE_RES_IRQ(gic_spi(167)), -}; - -/* SDHI2 */ -static struct sh_mobile_sdhi_info sdhi2_info __initdata = { - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | - MMC_CAP_POWER_OFF_CARD, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | - TMIO_MMC_WRPROTECT_DISABLE, -}; - -static struct resource sdhi2_resources[] __initdata = { - DEFINE_RES_MEM(0xee160000, 0x100), - DEFINE_RES_IRQ(gic_spi(168)), -}; - -static const struct pinctrl_map koelsch_pinctrl_map[] = { - /* DU */ - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", - "du_rgb666", "du"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", - "du_sync", "du"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", - "du_clk_out_0", "du"), - /* Ether */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791", - "eth_link", "eth"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791", - "eth_mdio", "eth"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791", - "eth_rmii", "eth"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791", - "intc_irq0", "intc"), - /* QSPI */ - PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791", - "qspi_ctrl", "qspi"), - PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791", - "qspi_data4", "qspi"), - /* SCIF0 (CN19: DEBUG SERIAL0) */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791", - "scif0_data_d", "scif0"), - /* SCIF1 (CN20: DEBUG SERIAL1) */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791", - "scif1_data_d", "scif1"), - /* I2C1 */ - PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.1", "pfc-r8a7791", - "i2c1_e", "i2c1"), - /* I2C2 */ - PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.2", "pfc-r8a7791", - "i2c2", "i2c2"), - /* I2C4 */ - PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.4", "pfc-r8a7791", - "i2c4_c", "i2c4"), - /* SDHI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791", - "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791", - "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791", - "sdhi0_cd", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791", - "sdhi0_wp", "sdhi0"), - /* SDHI2 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791", - "sdhi1_data4", "sdhi1"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791", - "sdhi1_ctrl", "sdhi1"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791", - "sdhi1_cd", "sdhi1"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791", - "sdhi1_wp", "sdhi1"), - /* SDHI2 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791", - "sdhi2_data4", "sdhi2"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791", - "sdhi2_ctrl", "sdhi2"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791", - "sdhi2_cd", "sdhi2"), -}; - -static void __init koelsch_add_standard_devices(void) -{ - r8a7791_clock_init(); - pinctrl_register_mappings(koelsch_pinctrl_map, - ARRAY_SIZE(koelsch_pinctrl_map)); - r8a7791_pinmux_init(); - r8a7791_add_standard_devices(); - platform_device_register_full(ðer_info); - platform_device_register_data(NULL, "leds-gpio", -1, - &koelsch_leds_pdata, - sizeof(koelsch_leds_pdata)); - platform_device_register_data(NULL, "gpio-keys", -1, - &koelsch_keys_pdata, - sizeof(koelsch_keys_pdata)); - platform_device_register_resndata(NULL, "qspi", 0, - qspi_resources, - ARRAY_SIZE(qspi_resources), - &qspi_pdata, sizeof(qspi_pdata)); - spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); - - koelsch_add_du_device(); - - platform_device_register_full(&sata0_info); - - koelsch_add_i2c(1); - koelsch_add_i2c(2); - koelsch_add_i2c(4); - koelsch_add_i2c(5); - - platform_device_register_data(NULL, "reg-fixed-voltage", 0, - &vcc_sdhi0_info, sizeof(struct fixed_voltage_config)); - platform_device_register_data(NULL, "reg-fixed-voltage", 1, - &vcc_sdhi1_info, sizeof(struct fixed_voltage_config)); - platform_device_register_data(NULL, "reg-fixed-voltage", 2, - &vcc_sdhi2_info, sizeof(struct fixed_voltage_config)); - platform_device_register_data(NULL, "gpio-regulator", 0, - &vccq_sdhi0_info, sizeof(struct gpio_regulator_config)); - platform_device_register_data(NULL, "gpio-regulator", 1, - &vccq_sdhi1_info, sizeof(struct gpio_regulator_config)); - platform_device_register_data(NULL, "gpio-regulator", 2, - &vccq_sdhi2_info, sizeof(struct gpio_regulator_config)); - - platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0, - sdhi0_resources, ARRAY_SIZE(sdhi0_resources), - &sdhi0_info, sizeof(struct sh_mobile_sdhi_info)); - - platform_device_register_resndata(NULL, "sh_mobile_sdhi", 1, - sdhi1_resources, ARRAY_SIZE(sdhi1_resources), - &sdhi1_info, sizeof(struct sh_mobile_sdhi_info)); - - platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2, - sdhi2_resources, ARRAY_SIZE(sdhi2_resources), - &sdhi2_info, sizeof(struct sh_mobile_sdhi_info)); - -} - -/* - * Ether LEDs on the Koelsch board are named LINK and ACTIVE which corresponds - * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits - * 14-15. We have to set them back to 01 from the default 00 value each time - * the PHY is reset. It's also important because the PHY's LED0 signal is - * connected to SoC's ETH_LINK signal and in the PHY's default mode it will - * bounce on and off after each packet, which we apparently want to avoid. - */ -static int koelsch_ksz8041_fixup(struct phy_device *phydev) -{ - u16 phyctrl1 = phy_read(phydev, 0x1e); - - phyctrl1 &= ~0xc000; - phyctrl1 |= 0x4000; - return phy_write(phydev, 0x1e, phyctrl1); -} - -static void __init koelsch_init(void) -{ - koelsch_add_standard_devices(); - - irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW); - - if (IS_ENABLED(CONFIG_PHYLIB)) - phy_register_fixup_for_id("r8a7791-ether-ff:01", - koelsch_ksz8041_fixup); -} - -static const char * const koelsch_boards_compat_dt[] __initconst = { - "renesas,koelsch", - NULL, -}; - -DT_MACHINE_START(KOELSCH_DT, "koelsch") - .smp = smp_ops(r8a7791_smp_ops), - .init_early = shmobile_init_delay, - .init_time = rcar_gen2_timer_init, - .init_machine = koelsch_init, - .init_late = shmobile_init_late, - .reserve = rcar_gen2_reserve, - .dt_compat = koelsch_boards_compat_dt, -MACHINE_END