@@ -26,6 +26,10 @@ Required Properties:
per LVDS encoder. The functional clocks must be named "du.x" with "x"
being the channel numerical index. The LVDS clocks must be named
"lvds.x" with "x" being the LVDS encoder numerical index.
+ - In addition to the functional and encoder clocks, all DU versions also
+ support externally supplied pixel clocks. Those clocks are optional.
+ When supplied they must be named "dclkin.x" with "x" being the input
+ clock numerical index.
Required nodes:
@@ -74,33 +74,71 @@ static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc)
if (ret < 0)
return ret;
+ ret = clk_prepare_enable(rcrtc->extclock);
+ if (ret < 0)
+ goto error_clock;
+
ret = rcar_du_group_get(rcrtc->group);
if (ret < 0)
- clk_disable_unprepare(rcrtc->clock);
+ goto error_group;
+
+ return 0;
+error_group:
+ clk_disable_unprepare(rcrtc->extclock);
+error_clock:
+ clk_disable_unprepare(rcrtc->clock);
return ret;
}
static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc)
{
rcar_du_group_put(rcrtc->group);
+
+ clk_disable_unprepare(rcrtc->extclock);
clk_disable_unprepare(rcrtc->clock);
}
static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
{
const struct drm_display_mode *mode = &rcrtc->crtc.mode;
+ unsigned long mode_clock = mode->clock * 1000;
unsigned long clk;
u32 value;
+ u32 escr;
u32 div;
- /* Dot clock */
+ /* Compute the clock divisor and select the internal or external dot
+ * clock based on the requested frequency.
+ */
clk = clk_get_rate(rcrtc->clock);
- div = DIV_ROUND_CLOSEST(clk, mode->clock * 1000);
+ div = DIV_ROUND_CLOSEST(clk, mode_clock);
div = clamp(div, 1U, 64U) - 1;
+ escr = div | ESCR_DCLKSEL_CLKS;
+
+ if (rcrtc->extclock) {
+ unsigned long extclk;
+ unsigned long extrate;
+ unsigned long rate;
+ u32 extdiv;
+
+ extclk = clk_get_rate(rcrtc->extclock);
+ extdiv = DIV_ROUND_CLOSEST(extclk, mode_clock);
+ extdiv = clamp(extdiv, 1U, 64U) - 1;
+
+ rate = clk / (div + 1);
+ extrate = extclk / (extdiv + 1);
+
+ if (abs((long)extrate - (long)mode_clock) <
+ abs((long)rate - (long)mode_clock)) {
+ dev_dbg(rcrtc->group->dev->dev,
+ "crtc%u: using external clock\n", rcrtc->index);
+ escr = extdiv | ESCR_DCLKSEL_DCLKIN;
+ }
+ }
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? ESCR2 : ESCR,
- ESCR_DCLKSEL_CLKS | div);
+ escr);
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? OTAR2 : OTAR, 0);
/* Signal polarities */
@@ -543,12 +581,13 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index)
struct rcar_du_crtc *rcrtc = &rcdu->crtcs[index];
struct drm_crtc *crtc = &rcrtc->crtc;
unsigned int irqflags;
- char clk_name[5];
+ struct clk *clk;
+ char clk_name[9];
char *name;
int irq;
int ret;
- /* Get the CRTC clock. */
+ /* Get the CRTC clock and the optional external clock. */
if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CRTC_IRQ_CLOCK)) {
sprintf(clk_name, "du.%u", index);
name = clk_name;
@@ -562,6 +601,15 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index)
return PTR_ERR(rcrtc->clock);
}
+ sprintf(clk_name, "dclkin.%u", index);
+ clk = devm_clk_get(rcdu->dev, clk_name);
+ if (!IS_ERR(clk)) {
+ rcrtc->extclock = clk;
+ } else if (PTR_ERR(rcrtc->clock) == -EPROBE_DEFER) {
+ dev_info(rcdu->dev, "can't get external clock %u\n", index);
+ return -EPROBE_DEFER;
+ }
+
rcrtc->group = rgrp;
rcrtc->mmio_offset = mmio_offsets[index];
rcrtc->index = index;
@@ -26,6 +26,7 @@ struct rcar_du_crtc {
struct drm_crtc crtc;
struct clk *clock;
+ struct clk *extclock;
unsigned int mmio_offset;
unsigned int index;
bool started;
@@ -66,9 +66,21 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp)
rcar_du_group_write(rgrp, DEFR4, DEFR4_CODE);
rcar_du_group_write(rgrp, DEFR5, DEFR5_CODE | DEFR5_DEFE5);
- if (rcar_du_has(rgrp->dev, RCAR_DU_FEATURE_EXT_CTRL_REGS))
+ if (rcar_du_has(rgrp->dev, RCAR_DU_FEATURE_EXT_CTRL_REGS)) {
rcar_du_group_setup_defr8(rgrp);
+ /* Configure input dot clock routing. We currently hardcode the
+ * configuration to routing DOTCLKINn to DUn.
+ */
+ rcar_du_group_write(rgrp, DIDSR, DIDSR_CODE |
+ DIDSR_LCDS_DCLKIN(2) |
+ DIDSR_LCDS_DCLKIN(1) |
+ DIDSR_LCDS_DCLKIN(0) |
+ DIDSR_PDCS_CLK(2, 0) |
+ DIDSR_PDCS_CLK(1, 0) |
+ DIDSR_PDCS_CLK(0, 0));
+ }
+
/* Use DS1PR and DS2PR to configure planes priorities and connects the
* superposition 0 to DU0 pins. DU1 pins will be configured dynamically.
*/
@@ -256,8 +256,8 @@
#define DIDSR_LCDS_LVDS0(n) (2 << (8 + (n) * 2))
#define DIDSR_LCDS_LVDS1(n) (3 << (8 + (n) * 2))
#define DIDSR_LCDS_MASK(n) (3 << (8 + (n) * 2))
-#define DIDSR_PCDS_CLK(n, clk) (clk << ((n) * 2))
-#define DIDSR_PCDS_MASK(n) (3 << ((n) * 2))
+#define DIDSR_PDCS_CLK(n, clk) (clk << ((n) * 2))
+#define DIDSR_PDCS_MASK(n) (3 << ((n) * 2))
/* -----------------------------------------------------------------------------
* Display Timing Generation Registers
The DU uses the module functional clock as the default pixel clock, but supports using an externally supplied pixel clock instead. Support this by adding the external pixel clock to the DT bindings, and selecting the clock automatically at runtime based on the requested mode pixel frequency. The input clock pins to DU channels routing is configurable, but currently hardcoded to connect input clock i to channel i. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- .../devicetree/bindings/video/renesas,du.txt | 4 ++ drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 60 +++++++++++++++++++--- drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 1 + drivers/gpu/drm/rcar-du/rcar_du_group.c | 14 ++++- drivers/gpu/drm/rcar-du/rcar_du_regs.h | 4 +- 5 files changed, 74 insertions(+), 9 deletions(-)