diff mbox

[v4,2/6] ARM: shmobile: ape6evm dts: Move Ethernet node to BSC

Message ID 1424185486-3017-3-git-send-email-geert+renesas@glider.be (mailing list archive)
State Accepted
Commit a656c603889c256e3d05e79e57714aa88d179903
Delegated to: Simon Horman
Headers show

Commit Message

Geert Uytterhoeven Feb. 17, 2015, 3:04 p.m. UTC 
Move the Ethernet node from the ad-hoc lbsc node to the BSC node,
as its connected to the Bus State Controller.  This allows the system to
know the right position of the Ethernet node in the clock and PM domain
hierarchy, and manage the clock and PM domain appropriately.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v4:
  - Add Acked-by,

v3:
  - Add Tested-by,

v2:
  - New.
---
 arch/arm/boot/dts/r8a73a4-ape6evm.dts | 35 +++++++++++++++--------------------
 1 file changed, 15 insertions(+), 20 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index 0d50bef0123449f5..44c4cac1820a4dfe 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -72,26 +72,6 @@ 
 		regulator-always-on;
 	};
 
-	lbsc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x20000000>;
-
-		ethernet@8000000 {
-			compatible = "smsc,lan9220", "smsc,lan9115";
-			reg = <0x08000000 0x1000>;
-			interrupt-parent = <&irqc1>;
-			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&ape6evm_fixed_3v3>;
-			vddvario-supply = <&ape6evm_fixed_1v8>;
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 		led1 {
@@ -184,6 +164,21 @@ 
 	voltage-tolerance = <1>; /* 1% */
 };
 
+&bsc {
+	ethernet@8000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x08000000 0x1000>;
+		interrupt-parent = <&irqc1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&ape6evm_fixed_3v3>;
+		vddvario-supply = <&ape6evm_fixed_1v8>;
+	};
+};
+
 &cmt1 {
 	status = "okay";
 };