@@ -35,8 +35,6 @@ Boards:
compatible = "renesas,alt", "renesas,r8a7794"
- APE6-EVM
compatible = "renesas,ape6evm", "renesas,r8a73a4"
- - APE6-EVM - Reference Device Tree Implementation
- compatible = "renesas,ape6evm-reference", "renesas,r8a73a4"
- Atmark Techno Armadillo-800 EVA
compatible = "renesas,armadillo800eva"
- BOCK-W
@@ -465,7 +465,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-torbreck.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
r8a73a4-ape6evm.dtb \
- r8a73a4-ape6evm-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \
deleted file mode 100644
@@ -1,156 +0,0 @@
-/*
- * Device Tree Source for the APE6EVM board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a73a4.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "APE6EVM";
- compatible = "renesas,ape6evm-reference", "renesas,r8a73a4";
-
- aliases {
- serial0 = &scifa0;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw";
- stdout-path = &scifa0;
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- memory@200000000 {
- device_type = "memory";
- reg = <2 0x00000000 0 0x40000000>;
- };
-
- vcc_mmc0: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "MMC0 Vcc";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator@1 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- /* Common 3.3V rail, used by several devices on APE6EVM */
- ape6evm_fixed_3v3: regulator@2 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- lbsc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0x20000000>;
- };
-};
-
-&i2c5 {
- status = "okay";
- vdd_dvfs: max8973@1b {
- compatible = "maxim,max8973";
- reg = <0x1b>;
-
- regulator-min-microvolt = <935000>;
- regulator-max-microvolt = <1200000>;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_dvfs>;
- operating-points = <
- /* kHz uV */
- 1950000 1115000
- 1462500 995000
- >;
- voltage-tolerance = <1>; /* 1% */
-};
-
-&cmt1 {
- status = "okay";
-};
-
-&pfc {
- scifa0_pins: serial0 {
- renesas,groups = "scifa0_data";
- renesas,function = "scifa0";
- };
-
- mmc0_pins: mmc {
- renesas,groups = "mmc0_data8", "mmc0_ctrl";
- renesas,function = "mmc0";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
- renesas,function = "sdhi0";
- };
-
- sdhi1_pins: sd1 {
- renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
- renesas,function = "sdhi1";
- };
-};
-
-&mmcif0 {
- vmmc-supply = <&vcc_mmc0>;
- bus-width = <8>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- status = "okay";
-};
-
-&scifa0 {
- pinctrl-0 = <&scifa0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&sdhi0 {
- vmmc-supply = <&vcc_sdhi0>;
- bus-width = <4>;
- toshiba,mmc-wrprotect-disable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhi0_pins>;
- status = "okay";
-};
-
-&sdhi1 {
- vmmc-supply = <&ape6evm_fixed_3v3>;
- bus-width = <4>;
- broken-cd;
- toshiba,mmc-wrprotect-disable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhi1_pins>;
- status = "okay";
-};
@@ -141,18 +141,6 @@ config MACH_APE6EVM
select SMSC_PHY if SMSC911X
select USE_OF
-config MACH_APE6EVM_REFERENCE
- bool "APE6EVM board - Reference Device Tree Implementation"
- depends on ARCH_R8A73A4
- select SMSC_PHY if SMSC911X
- select USE_OF
- ---help---
- Use reference implementation of APE6EVM board support
- which makes a greater use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
config MACH_ARMADILLO800EVA
bool "Armadillo-800 EVA board"
depends on ARCH_R8A7740
@@ -54,7 +54,6 @@ ifdef CONFIG_ARCH_SHMOBILE_MULTI
obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o
else
obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
-obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
@@ -1,7 +1,6 @@
# per-board load address for uImage
loadaddr-y :=
loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
-loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
deleted file mode 100644
@@ -1,61 +0,0 @@
-/*
- * APE6EVM board support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_device.h>
-#include <linux/sh_clk.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "r8a73a4.h"
-
-static void __init ape6evm_add_standard_devices(void)
-{
-#ifndef CONFIG_COMMON_CLK
- struct clk *parent;
- struct clk *mp;
-
- r8a73a4_clock_init();
-
- /* MP clock parent = extal2 */
- parent = clk_get(NULL, "extal2");
- mp = clk_get(NULL, "mp");
- BUG_ON(IS_ERR(parent) || IS_ERR(mp));
-
- clk_set_parent(mp, parent);
- clk_put(parent);
- clk_put(mp);
-#endif
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *ape6evm_boards_compat_dt[] __initdata = {
- "renesas,ape6evm-reference",
- NULL,
-};
-
-DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = shmobile_init_delay,
- .init_machine = ape6evm_add_standard_devices,
- .init_late = shmobile_init_late,
- .dt_compat = ape6evm_boards_compat_dt,
-MACHINE_END