@@ -186,19 +186,6 @@ config USB_RCAR_PHY
To compile this driver as a module, choose M here: the
module will be called phy-rcar-usb.
-config USB_RCAR_GEN2_PHY
- tristate "Renesas R-Car Gen2 USB PHY support"
- depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST
- select USB_PHY
- help
- Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver.
- It is typically used to control internal USB PHY for USBHS,
- and to configure shared USB channels 0 and 2.
- This driver supports R8A7790 and R8A7791.
-
- To compile this driver as a module, choose M here: the
- module will be called phy-rcar-gen2-usb.
-
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
depends on ARM || ARM64
@@ -23,7 +23,6 @@ obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o
obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o
obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o
-obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o
obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
deleted file mode 100644
@@ -1,246 +0,0 @@
-/*
- * Renesas R-Car Gen2 USB phy driver
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/platform_data/usb-rcar-gen2-phy.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/usb/otg.h>
-
-struct rcar_gen2_usb_phy_priv {
- struct usb_phy phy;
- void __iomem *base;
- struct clk *clk;
- spinlock_t lock;
- int usecount;
- u32 ugctrl2;
-};
-
-#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy)
-
-/* Low Power Status register */
-#define USBHS_LPSTS_REG 0x02
-#define USBHS_LPSTS_SUSPM (1 << 14)
-
-/* USB General control register */
-#define USBHS_UGCTRL_REG 0x80
-#define USBHS_UGCTRL_CONNECT (1 << 2)
-#define USBHS_UGCTRL_PLLRESET (1 << 0)
-
-/* USB General control register 2 */
-#define USBHS_UGCTRL2_REG 0x84
-#define USBHS_UGCTRL2_USB0_PCI (1 << 4)
-#define USBHS_UGCTRL2_USB0_HS (3 << 4)
-#define USBHS_UGCTRL2_USB2_PCI (0 << 31)
-#define USBHS_UGCTRL2_USB2_SS (1 << 31)
-
-/* USB General status register */
-#define USBHS_UGSTS_REG 0x88
-#define USBHS_UGSTS_LOCK (1 << 8)
-
-/* Enable USBHS internal phy */
-static int __rcar_gen2_usbhs_phy_enable(void __iomem *base)
-{
- u32 val;
- int i;
-
- /* USBHS PHY power on */
- val = ioread32(base + USBHS_UGCTRL_REG);
- val &= ~USBHS_UGCTRL_PLLRESET;
- iowrite32(val, base + USBHS_UGCTRL_REG);
-
- val = ioread16(base + USBHS_LPSTS_REG);
- val |= USBHS_LPSTS_SUSPM;
- iowrite16(val, base + USBHS_LPSTS_REG);
-
- for (i = 0; i < 20; i++) {
- val = ioread32(base + USBHS_UGSTS_REG);
- if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) {
- val = ioread32(base + USBHS_UGCTRL_REG);
- val |= USBHS_UGCTRL_CONNECT;
- iowrite32(val, base + USBHS_UGCTRL_REG);
- return 0;
- }
- udelay(1);
- }
-
- /* Timed out waiting for the PLL lock */
- return -ETIMEDOUT;
-}
-
-/* Disable USBHS internal phy */
-static int __rcar_gen2_usbhs_phy_disable(void __iomem *base)
-{
- u32 val;
-
- /* USBHS PHY power off */
- val = ioread32(base + USBHS_UGCTRL_REG);
- val &= ~USBHS_UGCTRL_CONNECT;
- iowrite32(val, base + USBHS_UGCTRL_REG);
-
- val = ioread16(base + USBHS_LPSTS_REG);
- val &= ~USBHS_LPSTS_SUSPM;
- iowrite16(val, base + USBHS_LPSTS_REG);
-
- val = ioread32(base + USBHS_UGCTRL_REG);
- val |= USBHS_UGCTRL_PLLRESET;
- iowrite32(val, base + USBHS_UGCTRL_REG);
- return 0;
-}
-
-/* Setup USB channels */
-static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv)
-{
- u32 val;
-
- clk_prepare_enable(priv->clk);
-
- /* Set USB channels in the USBHS UGCTRL2 register */
- val = ioread32(priv->base + USBHS_UGCTRL2_REG);
- val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS);
- val |= priv->ugctrl2;
- iowrite32(val, priv->base + USBHS_UGCTRL2_REG);
-}
-
-/* Shutdown USB channels */
-static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv)
-{
- __rcar_gen2_usbhs_phy_disable(priv->base);
- clk_disable_unprepare(priv->clk);
-}
-
-static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend)
-{
- struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
- unsigned long flags;
- int retval;
-
- spin_lock_irqsave(&priv->lock, flags);
- retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) :
- __rcar_gen2_usbhs_phy_enable(priv->base);
- spin_unlock_irqrestore(&priv->lock, flags);
- return retval;
-}
-
-static int rcar_gen2_usb_phy_init(struct usb_phy *phy)
-{
- struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- /*
- * Enable the clock and setup USB channels
- * if it's the first user
- */
- if (!priv->usecount++)
- __rcar_gen2_usb_phy_init(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
- return 0;
-}
-
-static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy)
-{
- struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->usecount) {
- dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n");
- goto out;
- }
-
- /* Disable everything if it's the last user */
- if (!--priv->usecount)
- __rcar_gen2_usb_phy_shutdown(priv);
-out:
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int rcar_gen2_usb_phy_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct rcar_gen2_phy_platform_data *pdata;
- struct rcar_gen2_usb_phy_priv *priv;
- struct resource *res;
- void __iomem *base;
- struct clk *clk;
- int retval;
-
- pdata = dev_get_platdata(dev);
- if (!pdata) {
- dev_err(dev, "No platform data\n");
- return -EINVAL;
- }
-
- clk = devm_clk_get(dev, "usbhs");
- if (IS_ERR(clk)) {
- dev_err(dev, "Can't get the clock\n");
- return PTR_ERR(clk);
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- spin_lock_init(&priv->lock);
- priv->clk = clk;
- priv->base = base;
- priv->ugctrl2 = pdata->chan0_pci ?
- USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS;
- priv->ugctrl2 |= pdata->chan2_pci ?
- USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS;
- priv->phy.dev = dev;
- priv->phy.label = dev_name(dev);
- priv->phy.init = rcar_gen2_usb_phy_init;
- priv->phy.shutdown = rcar_gen2_usb_phy_shutdown;
- priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend;
-
- retval = usb_add_phy_dev(&priv->phy);
- if (retval < 0) {
- dev_err(dev, "Failed to add USB phy\n");
- return retval;
- }
-
- platform_set_drvdata(pdev, priv);
-
- return retval;
-}
-
-static int rcar_gen2_usb_phy_remove(struct platform_device *pdev)
-{
- struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev);
-
- usb_remove_phy(&priv->phy);
-
- return 0;
-}
-
-static struct platform_driver rcar_gen2_usb_phy_driver = {
- .driver = {
- .name = "usb_phy_rcar_gen2",
- },
- .probe = rcar_gen2_usb_phy_probe,
- .remove = rcar_gen2_usb_phy_remove,
-};
-
-module_platform_driver(rcar_gen2_usb_phy_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy");
-MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>");
deleted file mode 100644
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __USB_RCAR_GEN2_PHY_H
-#define __USB_RCAR_GEN2_PHY_H
-
-#include <linux/types.h>
-
-struct rcar_gen2_phy_platform_data {
- /* USB channel 0 configuration */
- bool chan0_pci:1; /* true: PCI USB host 0, false: USBHS */
- /* USB channel 2 configuration */
- bool chan2_pci:1; /* true: PCI USB host 2, false: USBSS */
-};
-
-#endif
The phy-rcar-gen2-usb driver, which supports legacy platform data only, is no longer used since commit a483dcbfa21f919c ("ARM: shmobile: lager: Remove legacy board support"). This driver was superseded by the DT-only phy-rcar-gen2 driver, which was introduced in commit 1233f59f745b237d ("phy: Renesas R-Car Gen2 PHY driver"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/usb/phy/Kconfig | 13 -- drivers/usb/phy/Makefile | 1 - drivers/usb/phy/phy-rcar-gen2-usb.c | 246 ------------------------ include/linux/platform_data/usb-rcar-gen2-phy.h | 22 --- 4 files changed, 282 deletions(-) delete mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c delete mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h