@@ -1,7 +1,9 @@
* Renesas R8A7778 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R8A7778. It includes two PLLs and
-several fixed ratio dividers
+several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
Required Properties:
@@ -10,10 +12,18 @@ Required Properties:
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are
"plla", "pllb", "b", "out", "p", "s", and "s1".
+ - #power-domain-cells: Must be 0
+SoC devices that are part of the CPG Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
-Example
--------
+
+Examples
+--------
+
+ - CPG device node:
cpg_clocks: cpg_clocks@ffc80000 {
compatible = "renesas,r8a7778-cpg-clocks";
@@ -22,4 +32,17 @@ Example
clocks = <&extal_clk>;
clock-output-names = "plla", "pllb", "b",
"out", "p", "s", "s1";
+ #power-domain-cells = <0>;
+ };
+
+
+ - CPG Clock Domain member device node:
+
+ sdhi0: sd@ffe4c000 {
+ compatible = "renesas,sdhi-r8a7778";
+ reg = <0xffe4c000 0x100>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
};
@@ -4,6 +4,7 @@ config ARCH_SHMOBILE
config PM_RCAR
bool
+ select PM_GENERIC_DOMAINS if PM
config PM_RMOBILE
bool
@@ -124,6 +124,8 @@ static void __init r8a7778_cpg_clocks_init(struct device_node *np)
}
of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
+
+ cpg_mstp_add_clk_domain(np);
}
CLK_OF_DECLARE(r8a7778_cpg_clks, "renesas,r8a7778-cpg-clocks",
Add Clock Domain support to the R-Car M1A Clock Pulse Generator (CPG) driver using the generic PM Domain. This allows to power-manage the module clocks of SoC devices that are part of the CPG Clock Domain using Runtime PM, or for system suspend/resume. SoC devices that are part of the CPG Clock Domain and can be power-managed through an MSTP clock should be tagged in DT with a proper "power-domains" property. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2: - New. --- .../bindings/clock/renesas,r8a7778-cpg-clocks.txt | 29 +++++++++++++++++++--- arch/arm/mach-shmobile/Kconfig | 1 + drivers/clk/shmobile/clk-r8a7778.c | 2 ++ 3 files changed, 29 insertions(+), 3 deletions(-)