| Message ID | 1433874401-27161-13-git-send-email-robh@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Simon Horman |
| Headers | show |
On Tue, Jun 09, 2015 at 01:26:38PM -0500, Rob Herring wrote: > set_irq_flags is ARM specific with custom flags which have genirq > equivalents. Convert drivers to use the genirq interfaces directly, so we > can kill off set_irq_flags. The translation of flags is as follows: > > IRQF_VALID -> !IRQ_NOREQUEST > IRQF_PROBE -> !IRQ_NOPROBE > IRQF_NOAUTOEN -> IRQ_NOAUTOEN > > For IRQs managed by an irqdomain, the irqdomain core code handles clearing > and setting IRQ_NOREQUEST already, so there is no need to do this in > .map() functions and we can simply remove the set_irq_flags calls. Some > users also set IRQ_NOPROBE and this has been maintained although it is not > clear that is really needed. There appears to be a great deal of blind > copy and paste of this code. > > Signed-off-by: Rob Herring <robh@kernel.org> > Cc: Simon Horman <horms@verge.net.au> > Cc: Magnus Damm <magnus.damm@gmail.com> > Cc: linux-sh@vger.kernel.org I am trusting the description above coupled with the comments in the original code (that this patch removes). Assuming those ducks are aligned: Acked-by: Simon Horman <horms+renesas@verge.net.au> > --- > drivers/sh/intc/internals.h | 10 +--------- > 1 file changed, 1 insertion(+), 9 deletions(-) > > diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h > index 7dff08e..897ffb1 100644 > --- a/drivers/sh/intc/internals.h > +++ b/drivers/sh/intc/internals.h > @@ -99,15 +99,7 @@ static inline struct intc_desc_int *get_intc_desc(unsigned int irq) > */ > static inline void activate_irq(int irq) > { > -#ifdef CONFIG_ARM > - /* ARM requires an extra step to clear IRQ_NOREQUEST, which it > - * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. > - */ > - set_irq_flags(irq, IRQF_VALID); > -#else > - /* same effect on other architectures */ > - irq_set_noprobe(irq); > -#endif > + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); > } > > static inline int intc_handle_int_cmp(const void *a, const void *b) > -- > 2.1.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jul 07, 2015 at 09:53:39AM +0900, Simon Horman wrote: > On Tue, Jun 09, 2015 at 01:26:38PM -0500, Rob Herring wrote: > > set_irq_flags is ARM specific with custom flags which have genirq > > equivalents. Convert drivers to use the genirq interfaces directly, so we > > can kill off set_irq_flags. The translation of flags is as follows: > > > > IRQF_VALID -> !IRQ_NOREQUEST > > IRQF_PROBE -> !IRQ_NOPROBE > > IRQF_NOAUTOEN -> IRQ_NOAUTOEN > > > > For IRQs managed by an irqdomain, the irqdomain core code handles clearing > > and setting IRQ_NOREQUEST already, so there is no need to do this in > > .map() functions and we can simply remove the set_irq_flags calls. Some > > users also set IRQ_NOPROBE and this has been maintained although it is not > > clear that is really needed. There appears to be a great deal of blind > > copy and paste of this code. > > > > Signed-off-by: Rob Herring <robh@kernel.org> > > Cc: Simon Horman <horms@verge.net.au> > > Cc: Magnus Damm <magnus.damm@gmail.com> > > Cc: linux-sh@vger.kernel.org > > I am trusting the description above coupled with the comments in > the original code (that this patch removes). Assuming those ducks are > aligned: > > Acked-by: Simon Horman <horms+renesas@verge.net.au> As I usually take patches for drivers/sh/ (there have not been many of late) please let me know if you would like me to pick up this change. Also, a very minor nit, the prefix for patches to this file is usually 'sh:' rather than 'SH:'. > > > --- > > drivers/sh/intc/internals.h | 10 +--------- > > 1 file changed, 1 insertion(+), 9 deletions(-) > > > > diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h > > index 7dff08e..897ffb1 100644 > > --- a/drivers/sh/intc/internals.h > > +++ b/drivers/sh/intc/internals.h > > @@ -99,15 +99,7 @@ static inline struct intc_desc_int *get_intc_desc(unsigned int irq) > > */ > > static inline void activate_irq(int irq) > > { > > -#ifdef CONFIG_ARM > > - /* ARM requires an extra step to clear IRQ_NOREQUEST, which it > > - * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. > > - */ > > - set_irq_flags(irq, IRQF_VALID); > > -#else > > - /* same effect on other architectures */ > > - irq_set_noprobe(irq); > > -#endif > > + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); > > } > > > > static inline int intc_handle_int_cmp(const void *a, const void *b) > > -- > > 2.1.0 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jul 6, 2015 at 8:55 PM, Simon Horman <horms@verge.net.au> wrote: > On Tue, Jul 07, 2015 at 09:53:39AM +0900, Simon Horman wrote: >> On Tue, Jun 09, 2015 at 01:26:38PM -0500, Rob Herring wrote: >> > set_irq_flags is ARM specific with custom flags which have genirq >> > equivalents. Convert drivers to use the genirq interfaces directly, so we >> > can kill off set_irq_flags. The translation of flags is as follows: >> > >> > IRQF_VALID -> !IRQ_NOREQUEST >> > IRQF_PROBE -> !IRQ_NOPROBE >> > IRQF_NOAUTOEN -> IRQ_NOAUTOEN >> > >> > For IRQs managed by an irqdomain, the irqdomain core code handles clearing >> > and setting IRQ_NOREQUEST already, so there is no need to do this in >> > .map() functions and we can simply remove the set_irq_flags calls. Some >> > users also set IRQ_NOPROBE and this has been maintained although it is not >> > clear that is really needed. There appears to be a great deal of blind >> > copy and paste of this code. >> > >> > Signed-off-by: Rob Herring <robh@kernel.org> >> > Cc: Simon Horman <horms@verge.net.au> >> > Cc: Magnus Damm <magnus.damm@gmail.com> >> > Cc: linux-sh@vger.kernel.org >> >> I am trusting the description above coupled with the comments in >> the original code (that this patch removes). Assuming those ducks are >> aligned: >> >> Acked-by: Simon Horman <horms+renesas@verge.net.au> > > As I usually take patches for drivers/sh/ (there have not been many of late) > please let me know if you would like me to pick up this change. This is a dependency for removing set_irq_flags from ARM, so I plan to send the whole series to arm-soc. > Also, a very minor nit, the prefix for patches to this file is usually > 'sh:' rather than 'SH:'. Okay, will fix-up. Rob > >> >> > --- >> > drivers/sh/intc/internals.h | 10 +--------- >> > 1 file changed, 1 insertion(+), 9 deletions(-) >> > >> > diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h >> > index 7dff08e..897ffb1 100644 >> > --- a/drivers/sh/intc/internals.h >> > +++ b/drivers/sh/intc/internals.h >> > @@ -99,15 +99,7 @@ static inline struct intc_desc_int *get_intc_desc(unsigned int irq) >> > */ >> > static inline void activate_irq(int irq) >> > { >> > -#ifdef CONFIG_ARM >> > - /* ARM requires an extra step to clear IRQ_NOREQUEST, which it >> > - * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. >> > - */ >> > - set_irq_flags(irq, IRQF_VALID); >> > -#else >> > - /* same effect on other architectures */ >> > - irq_set_noprobe(irq); >> > -#endif >> > + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); >> > } >> > >> > static inline int intc_handle_int_cmp(const void *a, const void *b) >> > -- >> > 2.1.0 >> > >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-sh" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jul 07, 2015 at 09:38:53AM -0500, Rob Herring wrote: > On Mon, Jul 6, 2015 at 8:55 PM, Simon Horman <horms@verge.net.au> wrote: > > On Tue, Jul 07, 2015 at 09:53:39AM +0900, Simon Horman wrote: > >> On Tue, Jun 09, 2015 at 01:26:38PM -0500, Rob Herring wrote: > >> > set_irq_flags is ARM specific with custom flags which have genirq > >> > equivalents. Convert drivers to use the genirq interfaces directly, so we > >> > can kill off set_irq_flags. The translation of flags is as follows: > >> > > >> > IRQF_VALID -> !IRQ_NOREQUEST > >> > IRQF_PROBE -> !IRQ_NOPROBE > >> > IRQF_NOAUTOEN -> IRQ_NOAUTOEN > >> > > >> > For IRQs managed by an irqdomain, the irqdomain core code handles clearing > >> > and setting IRQ_NOREQUEST already, so there is no need to do this in > >> > .map() functions and we can simply remove the set_irq_flags calls. Some > >> > users also set IRQ_NOPROBE and this has been maintained although it is not > >> > clear that is really needed. There appears to be a great deal of blind > >> > copy and paste of this code. > >> > > >> > Signed-off-by: Rob Herring <robh@kernel.org> > >> > Cc: Simon Horman <horms@verge.net.au> > >> > Cc: Magnus Damm <magnus.damm@gmail.com> > >> > Cc: linux-sh@vger.kernel.org > >> > >> I am trusting the description above coupled with the comments in > >> the original code (that this patch removes). Assuming those ducks are > >> aligned: > >> > >> Acked-by: Simon Horman <horms+renesas@verge.net.au> > > > > As I usually take patches for drivers/sh/ (there have not been many of late) > > please let me know if you would like me to pick up this change. > > This is a dependency for removing set_irq_flags from ARM, so I plan to > send the whole series to arm-soc. Thanks, that is fine by me. > > Also, a very minor nit, the prefix for patches to this file is usually > > 'sh:' rather than 'SH:'. > > Okay, will fix-up. > > Rob > > > > >> > >> > --- > >> > drivers/sh/intc/internals.h | 10 +--------- > >> > 1 file changed, 1 insertion(+), 9 deletions(-) > >> > > >> > diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h > >> > index 7dff08e..897ffb1 100644 > >> > --- a/drivers/sh/intc/internals.h > >> > +++ b/drivers/sh/intc/internals.h > >> > @@ -99,15 +99,7 @@ static inline struct intc_desc_int *get_intc_desc(unsigned int irq) > >> > */ > >> > static inline void activate_irq(int irq) > >> > { > >> > -#ifdef CONFIG_ARM > >> > - /* ARM requires an extra step to clear IRQ_NOREQUEST, which it > >> > - * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. > >> > - */ > >> > - set_irq_flags(irq, IRQF_VALID); > >> > -#else > >> > - /* same effect on other architectures */ > >> > - irq_set_noprobe(irq); > >> > -#endif > >> > + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); > >> > } > >> > > >> > static inline int intc_handle_int_cmp(const void *a, const void *b) > >> > -- > >> > 2.1.0 > >> > > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-sh" in > >> the body of a message to majordomo@vger.kernel.org > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > >> > -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h index 7dff08e..897ffb1 100644 --- a/drivers/sh/intc/internals.h +++ b/drivers/sh/intc/internals.h @@ -99,15 +99,7 @@ static inline struct intc_desc_int *get_intc_desc(unsigned int irq) */ static inline void activate_irq(int irq) { -#ifdef CONFIG_ARM - /* ARM requires an extra step to clear IRQ_NOREQUEST, which it - * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. - */ - set_irq_flags(irq, IRQF_VALID); -#else - /* same effect on other architectures */ - irq_set_noprobe(irq); -#endif + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } static inline int intc_handle_int_cmp(const void *a, const void *b)
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also set IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: linux-sh@vger.kernel.org --- drivers/sh/intc/internals.h | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)