| Message ID | 1434530336-15073-8-git-send-email-geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | ffd2f9a5afb730b9f6c1d1938934213c3cfcf249 |
| Delegated to: | Simon Horman |
| Headers | show |
On Wed, Jun 17, 2015 at 10:38:56AM +0200, Geert Uytterhoeven wrote: > Configure pinctrl and a GPIO-controller board mux for LCD use. > This allows the armadillo800eva board staging code to enable lcdc0. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Thanks Geert, As Greg has now taken patches 1 - 6 I have queued this up. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 2e31d8c01cbf6a74..105d9c95de4af611 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -224,6 +224,9 @@ }; &pfc { + pinctrl-0 = <&lcd0_pins>; + pinctrl-names = "default"; + ether_pins: ether { renesas,groups = "gether_mii", "gether_int"; renesas,function = "gether"; @@ -259,6 +262,16 @@ "fsia_data_in_1", "fsia_data_out_0"; renesas,function = "fsia"; }; + + lcd0_pins: lcd0 { + renesas,groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync"; + renesas,function = "lcd0"; + + /* DBGMD/LCDC0/FSIA MUX */ + gpio-hog; + gpios = <176 0>; + output-high; + }; }; &tpu {
Configure pinctrl and a GPIO-controller board mux for LCD use. This allows the armadillo800eva board staging code to enable lcdc0. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2: - New. --- arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)