diff mbox

[v4,2/8] pinctrl: sh-pfc: r8a7790: Implement voltage switching for SDHI

Message ID 1435879310.7541.2.camel@codethink.co.uk (mailing list archive)
State RFC
Headers show

Commit Message

Ben Hutchings July 2, 2015, 11:21 p.m. UTC
On Wed, 2015-07-01 at 10:37 +0300, Laurent Pinchart wrote:
[...]
> > +#define PIN_IO_VOLTAGE(bank, _pin, _name, sfx)		\
> > +	[RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_IO_VOLTAGE
> > +
> >  static const struct sh_pfc_pin pinmux_pins[] = {
> >  	PINMUX_GPIO_GP_ALL(),
> > 
> > -	/* Pins not associated with a GPIO port */
> > +	/*
> > +	 * All pins assigned to GPIO bank 3 can be used for SD interfaces
> > +	 * in which case they support both 3.3V and 1.8V signalling.
> > +	 */
> > +	PORT_GP_32(3, PIN_IO_VOLTAGE, unused),
> > +
> > +	/* Pins not associated with a GPIO port, placed after all the GPIOs */
> > +	[RCAR_GP_PIN(5, 31) + 1] =
> 
> I'm sorry but I still don't like this. gcc outputs a warning when overriding 
> an initializer if you enable -Wextra, which leads me to believe this construct 
> is dubious. It should at least be tested with LLVM.
> 
> I'd much prefer replacing PINMUX_GPIO_GP_ALL() with a version that will 
> initialize the pins correctly right away.
[...]

Something like this?


If you're happy with that, I'll re-send the series (hopefully for the
last time!) with the r8a7790 changes squashed into "pinctrl: sh-pfc:
r8a7790: Implement voltage switching for SDHI" and the SH_PFC_PIN_CFG
macro change as a new patch before it.

Ben.


--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Ben Hutchings July 9, 2015, 12:34 p.m. UTC | #1
On Fri, 2015-07-03 at 00:21 +0100, Ben Hutchings wrote:
> On Wed, 2015-07-01 at 10:37 +0300, Laurent Pinchart wrote:
> [...]
> > > +#define PIN_IO_VOLTAGE(bank, _pin, _name, sfx)		\
> > > +	[RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_IO_VOLTAGE
> > > +
> > >  static const struct sh_pfc_pin pinmux_pins[] = {
> > >  	PINMUX_GPIO_GP_ALL(),
> > > 
> > > -	/* Pins not associated with a GPIO port */
> > > +	/*
> > > +	 * All pins assigned to GPIO bank 3 can be used for SD interfaces
> > > +	 * in which case they support both 3.3V and 1.8V signalling.
> > > +	 */
> > > +	PORT_GP_32(3, PIN_IO_VOLTAGE, unused),
> > > +
> > > +	/* Pins not associated with a GPIO port, placed after all the GPIOs */
> > > +	[RCAR_GP_PIN(5, 31) + 1] =
> > 
> > I'm sorry but I still don't like this. gcc outputs a warning when overriding 
> > an initializer if you enable -Wextra, which leads me to believe this construct 
> > is dubious. It should at least be tested with LLVM.
> > 
> > I'd much prefer replacing PINMUX_GPIO_GP_ALL() with a version that will 
> > initialize the pins correctly right away.
> [...]
> 
> Something like this?

Laurent, please can you answer whether this is the right way to go.

Ben.

> diff --git a/drivers/pinctrl/sh-pfc/pfc-emev2.c b/drivers/pinctrl/sh-pfc/pfc-emev2.c
> index 849c6943ed30..ad1a8281a91b 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-emev2.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-emev2.c
> @@ -228,7 +228,7 @@ enum {
>  
>  /* Expand to a list of sh_pfc_pin entries (named PORT#).
>   * NOTE: No config are recorded since the driver do not handle pinconf. */
> -#define __PIN_CFG(pn, pfx, sfx)  SH_PFC_PIN_CFG(pfx, 0)
> +#define __PIN_CFG(pn, pfx, sfx)  SH_PFC_PORT_CFG(pfx, 0)
>  #define PINMUX_EMEV_GPIO_ALL()	  CPU_ALL_PORT(__PIN_CFG, , unused)
>  
>  static const struct sh_pfc_pin pinmux_pins[] = {
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> index 280a56f97786..ca1538371563 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> @@ -1272,8 +1272,8 @@ static const u16 pinmux_data[] = {
>  #define __IO	(SH_PFC_PIN_CFG_INPUT | SH_PFC_PIN_CFG_OUTPUT)
>  #define __PUD	(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
>  
> -#define R8A73A4_PIN_IO_PU_PD(pin)       SH_PFC_PIN_CFG(pin, __IO | __PUD)
> -#define R8A73A4_PIN_O(pin)              SH_PFC_PIN_CFG(pin, __O)
> +#define R8A73A4_PIN_IO_PU_PD(pin)       SH_PFC_PORT_CFG(pin, __IO | __PUD)
> +#define R8A73A4_PIN_O(pin)              SH_PFC_PORT_CFG(pin, __O)
>  
>  static const struct sh_pfc_pin pinmux_pins[] = {
>  	R8A73A4_PIN_IO_PU_PD(0), R8A73A4_PIN_IO_PU_PD(1),
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> index b486e9d20cc2..92939cbd7ad0 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> @@ -1535,15 +1535,15 @@ static const u16 pinmux_data[] = {
>  #define __PU		(SH_PFC_PIN_CFG_PULL_UP)
>  #define __PUD		(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
>  
> -#define R8A7740_PIN_I_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PD)
> -#define R8A7740_PIN_I_PU(pin)		SH_PFC_PIN_CFG(pin, __I | __PU)
> -#define R8A7740_PIN_I_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __I | __PUD)
> -#define R8A7740_PIN_IO(pin)		SH_PFC_PIN_CFG(pin, __IO)
> -#define R8A7740_PIN_IO_PD(pin)		SH_PFC_PIN_CFG(pin, __IO | __PD)
> -#define R8A7740_PIN_IO_PU(pin)		SH_PFC_PIN_CFG(pin, __IO | __PU)
> -#define R8A7740_PIN_IO_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __IO | __PUD)
> -#define R8A7740_PIN_O(pin)		SH_PFC_PIN_CFG(pin, __O)
> -#define R8A7740_PIN_O_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __O | __PUD)
> +#define R8A7740_PIN_I_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PD)
> +#define R8A7740_PIN_I_PU(pin)		SH_PFC_PORT_CFG(pin, __I | __PU)
> +#define R8A7740_PIN_I_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __I | __PUD)
> +#define R8A7740_PIN_IO(pin)		SH_PFC_PORT_CFG(pin, __IO)
> +#define R8A7740_PIN_IO_PD(pin)		SH_PFC_PORT_CFG(pin, __IO | __PD)
> +#define R8A7740_PIN_IO_PU(pin)		SH_PFC_PORT_CFG(pin, __IO | __PU)
> +#define R8A7740_PIN_IO_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __IO | __PUD)
> +#define R8A7740_PIN_O(pin)		SH_PFC_PORT_CFG(pin, __O)
> +#define R8A7740_PIN_O_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __O | __PUD)
>  
>  static const struct sh_pfc_pin pinmux_pins[] = {
>  	/* Table 56-1 (I/O and Pull U/D) */
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> index 1137bbc810cd..1e59e1775374 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> @@ -1740,20 +1740,23 @@ static const u16 pinmux_data[] = {
>  #define PIN_NUMBER(r, c) (((r) - 'A') * 31 + (c) + 200)
>  #define PIN_A_NUMBER(r, c) PIN_NUMBER(ROW_GROUP_A(r), c)
>  
> -#define PIN_IO_VOLTAGE(bank, _pin, _name, sfx)		\
> -	[RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_IO_VOLTAGE
> +/*
> + * All pins assigned to GPIO bank 3 can be used for SD interfaces in
> + * which case they support both 3.3V and 1.8V signalling.
> + */
> +#define GP_GPIO_IO_VOLTAGE(bank, _pin, _name, sfx)			\
> +	[RCAR_GP_PIN(bank, _pin)] =					\
> +		SH_PFC_GPIO_CFG(bank, _pin, _name, SH_PFC_PIN_CFG_IO_VOLTAGE)
>  
>  static const struct sh_pfc_pin pinmux_pins[] = {
> -	PINMUX_GPIO_GP_ALL(),
> -
> -	/*
> -	 * All pins assigned to GPIO bank 3 can be used for SD interfaces
> -	 * in which case they support both 3.3V and 1.8V signalling.
> -	 */
> -	PORT_GP_32(3, PIN_IO_VOLTAGE, unused),
> +	PORT_GP_32(0, _GP_GPIO, unused),
> +	PORT_GP_32(1, _GP_GPIO, unused),
> +	PORT_GP_32(2, _GP_GPIO, unused),
> +	PORT_GP_32(3, GP_GPIO_IO_VOLTAGE, unused),
> +	PORT_GP_32(4, _GP_GPIO, unused),
> +	PORT_GP_32(5, _GP_GPIO, unused),
>  
>  	/* Pins not associated with a GPIO port, placed after all the GPIOs */
> -	[RCAR_GP_PIN(5, 31) + 1] =
>  	SH_PFC_PIN_NAMED(ROW_GROUP_A('F'), 15, AF15),
>  	SH_PFC_PIN_NAMED(ROW_GROUP_A('G'), 15, AG15),
>  	SH_PFC_PIN_NAMED(ROW_GROUP_A('H'), 15, AH15),
> diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> index d2efbfb776ac..2c798550cd8c 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> @@ -1166,14 +1166,14 @@ static const u16 pinmux_data[] = {
>  #define __PU		(SH_PFC_PIN_CFG_PULL_UP)
>  #define __PUD		(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
>  
> -#define SH73A0_PIN_I_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PD)
> -#define SH73A0_PIN_I_PU(pin)		SH_PFC_PIN_CFG(pin, __I | __PU)
> -#define SH73A0_PIN_I_PU_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PUD)
> -#define SH73A0_PIN_IO(pin)		SH_PFC_PIN_CFG(pin, __IO)
> -#define SH73A0_PIN_IO_PD(pin)		SH_PFC_PIN_CFG(pin, __IO | __PD)
> -#define SH73A0_PIN_IO_PU(pin)		SH_PFC_PIN_CFG(pin, __IO | __PU)
> -#define SH73A0_PIN_IO_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __IO | __PUD)
> -#define SH73A0_PIN_O(pin)		SH_PFC_PIN_CFG(pin, __O)
> +#define SH73A0_PIN_I_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PD)
> +#define SH73A0_PIN_I_PU(pin)		SH_PFC_PORT_CFG(pin, __I | __PU)
> +#define SH73A0_PIN_I_PU_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PUD)
> +#define SH73A0_PIN_IO(pin)		SH_PFC_PORT_CFG(pin, __IO)
> +#define SH73A0_PIN_IO_PD(pin)		SH_PFC_PORT_CFG(pin, __IO | __PD)
> +#define SH73A0_PIN_IO_PU(pin)		SH_PFC_PORT_CFG(pin, __IO | __PU)
> +#define SH73A0_PIN_IO_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __IO | __PUD)
> +#define SH73A0_PIN_O(pin)		SH_PFC_PORT_CFG(pin, __O)
>  
>  /* Pin numbers for pins without a corresponding GPIO port number are computed
>   * from the row and column numbers with a 1000 offset to avoid collisions with
> diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h
> index 734f7a92229c..3eca740bba02 100644
> --- a/drivers/pinctrl/sh-pfc/sh_pfc.h
> +++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
> @@ -272,14 +272,18 @@ struct sh_pfc_soc_info {
>  		.enum_id = _pin##_DATA,					\
>  	}
>  
> -/* SH_PFC_PIN_CFG - Expand to a sh_pfc_pin entry (named PORT#) with config */
> -#define SH_PFC_PIN_CFG(_pin, cfgs)					\
> +/* SH_PFC_{PORT,GPIO}_CFG - Expand to a sh_pfc_pin entry with config */
> +#define _SH_PFC_PIN_CFG(_pin, _name, cfgs)				\
>  	{								\
>  		.pin = _pin,						\
> -		.name = __stringify(PORT##_pin),			\
> -		.enum_id = PORT##_pin##_DATA,				\
> +		.name = __stringify(_name),				\
> +		.enum_id = _name##_DATA,				\
>  		.configs = cfgs,					\
>  	}
> +#define SH_PFC_PORT_CFG(_pin, cfgs)				\
> +	_SH_PFC_PIN_CFG(PORT##_pin, PORT##_pin, cfgs)
> +#define SH_PFC_GPIO_CFG(bank, _pin, _name, cfgs)		\
> +	_SH_PFC_PIN_CFG((bank * 32) + _pin, _name, cfgs)
>  
>  /* SH_PFC_PIN_NAMED - Expand to a sh_pfc_pin entry with the given name */
>  #define SH_PFC_PIN_NAMED(row, col, _name)				\
> --- END ---
> 
> If you're happy with that, I'll re-send the series (hopefully for the
> last time!) with the r8a7790 changes squashed into "pinctrl: sh-pfc:
> r8a7790: Implement voltage switching for SDHI" and the SH_PFC_PIN_CFG
> macro change as a new patch before it.
> 
> Ben.
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kuninori Morimoto Nov. 13, 2015, 8:38 a.m. UTC | #2
Hi Laurent

Sorry for replying to old patch.
But, it seems Ben is waiting your answer about this patch
(This patch-set is not yet upstreamed)

> On Fri, 2015-07-03 at 00:21 +0100, Ben Hutchings wrote:
> > On Wed, 2015-07-01 at 10:37 +0300, Laurent Pinchart wrote:
> > [...]
> > > > +#define PIN_IO_VOLTAGE(bank, _pin, _name, sfx)		\
> > > > +	[RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_IO_VOLTAGE
> > > > +
> > > >  static const struct sh_pfc_pin pinmux_pins[] = {
> > > >  	PINMUX_GPIO_GP_ALL(),
> > > > 
> > > > -	/* Pins not associated with a GPIO port */
> > > > +	/*
> > > > +	 * All pins assigned to GPIO bank 3 can be used for SD interfaces
> > > > +	 * in which case they support both 3.3V and 1.8V signalling.
> > > > +	 */
> > > > +	PORT_GP_32(3, PIN_IO_VOLTAGE, unused),
> > > > +
> > > > +	/* Pins not associated with a GPIO port, placed after all the GPIOs */
> > > > +	[RCAR_GP_PIN(5, 31) + 1] =
> > > 
> > > I'm sorry but I still don't like this. gcc outputs a warning when overriding 
> > > an initializer if you enable -Wextra, which leads me to believe this construct 
> > > is dubious. It should at least be tested with LLVM.
> > > 
> > > I'd much prefer replacing PINMUX_GPIO_GP_ALL() with a version that will 
> > > initialize the pins correctly right away.
> > [...]
> > 
> > Something like this?
> 
> Laurent, please can you answer whether this is the right way to go.
> 
> Ben.
> 
> > diff --git a/drivers/pinctrl/sh-pfc/pfc-emev2.c b/drivers/pinctrl/sh-pfc/pfc-emev2.c
> > index 849c6943ed30..ad1a8281a91b 100644
> > --- a/drivers/pinctrl/sh-pfc/pfc-emev2.c
> > +++ b/drivers/pinctrl/sh-pfc/pfc-emev2.c
> > @@ -228,7 +228,7 @@ enum {
> >  
> >  /* Expand to a list of sh_pfc_pin entries (named PORT#).
> >   * NOTE: No config are recorded since the driver do not handle pinconf. */
> > -#define __PIN_CFG(pn, pfx, sfx)  SH_PFC_PIN_CFG(pfx, 0)
> > +#define __PIN_CFG(pn, pfx, sfx)  SH_PFC_PORT_CFG(pfx, 0)
> >  #define PINMUX_EMEV_GPIO_ALL()	  CPU_ALL_PORT(__PIN_CFG, , unused)
> >  
> >  static const struct sh_pfc_pin pinmux_pins[] = {
> > diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> > index 280a56f97786..ca1538371563 100644
> > --- a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> > +++ b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> > @@ -1272,8 +1272,8 @@ static const u16 pinmux_data[] = {
> >  #define __IO	(SH_PFC_PIN_CFG_INPUT | SH_PFC_PIN_CFG_OUTPUT)
> >  #define __PUD	(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
> >  
> > -#define R8A73A4_PIN_IO_PU_PD(pin)       SH_PFC_PIN_CFG(pin, __IO | __PUD)
> > -#define R8A73A4_PIN_O(pin)              SH_PFC_PIN_CFG(pin, __O)
> > +#define R8A73A4_PIN_IO_PU_PD(pin)       SH_PFC_PORT_CFG(pin, __IO | __PUD)
> > +#define R8A73A4_PIN_O(pin)              SH_PFC_PORT_CFG(pin, __O)
> >  
> >  static const struct sh_pfc_pin pinmux_pins[] = {
> >  	R8A73A4_PIN_IO_PU_PD(0), R8A73A4_PIN_IO_PU_PD(1),
> > diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> > index b486e9d20cc2..92939cbd7ad0 100644
> > --- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> > +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> > @@ -1535,15 +1535,15 @@ static const u16 pinmux_data[] = {
> >  #define __PU		(SH_PFC_PIN_CFG_PULL_UP)
> >  #define __PUD		(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
> >  
> > -#define R8A7740_PIN_I_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PD)
> > -#define R8A7740_PIN_I_PU(pin)		SH_PFC_PIN_CFG(pin, __I | __PU)
> > -#define R8A7740_PIN_I_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __I | __PUD)
> > -#define R8A7740_PIN_IO(pin)		SH_PFC_PIN_CFG(pin, __IO)
> > -#define R8A7740_PIN_IO_PD(pin)		SH_PFC_PIN_CFG(pin, __IO | __PD)
> > -#define R8A7740_PIN_IO_PU(pin)		SH_PFC_PIN_CFG(pin, __IO | __PU)
> > -#define R8A7740_PIN_IO_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __IO | __PUD)
> > -#define R8A7740_PIN_O(pin)		SH_PFC_PIN_CFG(pin, __O)
> > -#define R8A7740_PIN_O_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __O | __PUD)
> > +#define R8A7740_PIN_I_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PD)
> > +#define R8A7740_PIN_I_PU(pin)		SH_PFC_PORT_CFG(pin, __I | __PU)
> > +#define R8A7740_PIN_I_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __I | __PUD)
> > +#define R8A7740_PIN_IO(pin)		SH_PFC_PORT_CFG(pin, __IO)
> > +#define R8A7740_PIN_IO_PD(pin)		SH_PFC_PORT_CFG(pin, __IO | __PD)
> > +#define R8A7740_PIN_IO_PU(pin)		SH_PFC_PORT_CFG(pin, __IO | __PU)
> > +#define R8A7740_PIN_IO_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __IO | __PUD)
> > +#define R8A7740_PIN_O(pin)		SH_PFC_PORT_CFG(pin, __O)
> > +#define R8A7740_PIN_O_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __O | __PUD)
> >  
> >  static const struct sh_pfc_pin pinmux_pins[] = {
> >  	/* Table 56-1 (I/O and Pull U/D) */
> > diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> > index 1137bbc810cd..1e59e1775374 100644
> > --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> > +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> > @@ -1740,20 +1740,23 @@ static const u16 pinmux_data[] = {
> >  #define PIN_NUMBER(r, c) (((r) - 'A') * 31 + (c) + 200)
> >  #define PIN_A_NUMBER(r, c) PIN_NUMBER(ROW_GROUP_A(r), c)
> >  
> > -#define PIN_IO_VOLTAGE(bank, _pin, _name, sfx)		\
> > -	[RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_IO_VOLTAGE
> > +/*
> > + * All pins assigned to GPIO bank 3 can be used for SD interfaces in
> > + * which case they support both 3.3V and 1.8V signalling.
> > + */
> > +#define GP_GPIO_IO_VOLTAGE(bank, _pin, _name, sfx)			\
> > +	[RCAR_GP_PIN(bank, _pin)] =					\
> > +		SH_PFC_GPIO_CFG(bank, _pin, _name, SH_PFC_PIN_CFG_IO_VOLTAGE)
> >  
> >  static const struct sh_pfc_pin pinmux_pins[] = {
> > -	PINMUX_GPIO_GP_ALL(),
> > -
> > -	/*
> > -	 * All pins assigned to GPIO bank 3 can be used for SD interfaces
> > -	 * in which case they support both 3.3V and 1.8V signalling.
> > -	 */
> > -	PORT_GP_32(3, PIN_IO_VOLTAGE, unused),
> > +	PORT_GP_32(0, _GP_GPIO, unused),
> > +	PORT_GP_32(1, _GP_GPIO, unused),
> > +	PORT_GP_32(2, _GP_GPIO, unused),
> > +	PORT_GP_32(3, GP_GPIO_IO_VOLTAGE, unused),
> > +	PORT_GP_32(4, _GP_GPIO, unused),
> > +	PORT_GP_32(5, _GP_GPIO, unused),
> >  
> >  	/* Pins not associated with a GPIO port, placed after all the GPIOs */
> > -	[RCAR_GP_PIN(5, 31) + 1] =
> >  	SH_PFC_PIN_NAMED(ROW_GROUP_A('F'), 15, AF15),
> >  	SH_PFC_PIN_NAMED(ROW_GROUP_A('G'), 15, AG15),
> >  	SH_PFC_PIN_NAMED(ROW_GROUP_A('H'), 15, AH15),
> > diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> > index d2efbfb776ac..2c798550cd8c 100644
> > --- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> > +++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> > @@ -1166,14 +1166,14 @@ static const u16 pinmux_data[] = {
> >  #define __PU		(SH_PFC_PIN_CFG_PULL_UP)
> >  #define __PUD		(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
> >  
> > -#define SH73A0_PIN_I_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PD)
> > -#define SH73A0_PIN_I_PU(pin)		SH_PFC_PIN_CFG(pin, __I | __PU)
> > -#define SH73A0_PIN_I_PU_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PUD)
> > -#define SH73A0_PIN_IO(pin)		SH_PFC_PIN_CFG(pin, __IO)
> > -#define SH73A0_PIN_IO_PD(pin)		SH_PFC_PIN_CFG(pin, __IO | __PD)
> > -#define SH73A0_PIN_IO_PU(pin)		SH_PFC_PIN_CFG(pin, __IO | __PU)
> > -#define SH73A0_PIN_IO_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __IO | __PUD)
> > -#define SH73A0_PIN_O(pin)		SH_PFC_PIN_CFG(pin, __O)
> > +#define SH73A0_PIN_I_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PD)
> > +#define SH73A0_PIN_I_PU(pin)		SH_PFC_PORT_CFG(pin, __I | __PU)
> > +#define SH73A0_PIN_I_PU_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PUD)
> > +#define SH73A0_PIN_IO(pin)		SH_PFC_PORT_CFG(pin, __IO)
> > +#define SH73A0_PIN_IO_PD(pin)		SH_PFC_PORT_CFG(pin, __IO | __PD)
> > +#define SH73A0_PIN_IO_PU(pin)		SH_PFC_PORT_CFG(pin, __IO | __PU)
> > +#define SH73A0_PIN_IO_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __IO | __PUD)
> > +#define SH73A0_PIN_O(pin)		SH_PFC_PORT_CFG(pin, __O)
> >  
> >  /* Pin numbers for pins without a corresponding GPIO port number are computed
> >   * from the row and column numbers with a 1000 offset to avoid collisions with
> > diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h
> > index 734f7a92229c..3eca740bba02 100644
> > --- a/drivers/pinctrl/sh-pfc/sh_pfc.h
> > +++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
> > @@ -272,14 +272,18 @@ struct sh_pfc_soc_info {
> >  		.enum_id = _pin##_DATA,					\
> >  	}
> >  
> > -/* SH_PFC_PIN_CFG - Expand to a sh_pfc_pin entry (named PORT#) with config */
> > -#define SH_PFC_PIN_CFG(_pin, cfgs)					\
> > +/* SH_PFC_{PORT,GPIO}_CFG - Expand to a sh_pfc_pin entry with config */
> > +#define _SH_PFC_PIN_CFG(_pin, _name, cfgs)				\
> >  	{								\
> >  		.pin = _pin,						\
> > -		.name = __stringify(PORT##_pin),			\
> > -		.enum_id = PORT##_pin##_DATA,				\
> > +		.name = __stringify(_name),				\
> > +		.enum_id = _name##_DATA,				\
> >  		.configs = cfgs,					\
> >  	}
> > +#define SH_PFC_PORT_CFG(_pin, cfgs)				\
> > +	_SH_PFC_PIN_CFG(PORT##_pin, PORT##_pin, cfgs)
> > +#define SH_PFC_GPIO_CFG(bank, _pin, _name, cfgs)		\
> > +	_SH_PFC_PIN_CFG((bank * 32) + _pin, _name, cfgs)
> >  
> >  /* SH_PFC_PIN_NAMED - Expand to a sh_pfc_pin entry with the given name */
> >  #define SH_PFC_PIN_NAMED(row, col, _name)				\
> > --- END ---
> > 
> > If you're happy with that, I'll re-send the series (hopefully for the
> > last time!) with the r8a7790 changes squashed into "pinctrl: sh-pfc:
> > r8a7790: Implement voltage switching for SDHI" and the SH_PFC_PIN_CFG
> > macro change as a new patch before it.
> > 
> > Ben.
> > 
> 
> 


Best regards
---
Kuninori Morimoto
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Laurent Pinchart Feb. 3, 2016, 9:59 a.m. UTC | #3
Hi Ben,

Just realized this mail thread fell through the cracks, sorry :-/

On Friday 03 July 2015 00:21:50 Ben Hutchings wrote:
> On Wed, 2015-07-01 at 10:37 +0300, Laurent Pinchart wrote:
> [...]
> 
> > > +#define PIN_IO_VOLTAGE(bank, _pin, _name, sfx)		\
> > > +	[RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_IO_VOLTAGE
> > > +
> > > 
> > >  static const struct sh_pfc_pin pinmux_pins[] = {
> > >  
> > >  	PINMUX_GPIO_GP_ALL(),
> > > 
> > > -	/* Pins not associated with a GPIO port */
> > > +	/*
> > > +	 * All pins assigned to GPIO bank 3 can be used for SD interfaces
> > > +	 * in which case they support both 3.3V and 1.8V signalling.
> > > +	 */
> > > +	PORT_GP_32(3, PIN_IO_VOLTAGE, unused),
> > > +
> > > +	/* Pins not associated with a GPIO port, placed after all the GPIOs 
*/
> > > +	[RCAR_GP_PIN(5, 31) + 1] =
> > 
> > I'm sorry but I still don't like this. gcc outputs a warning when
> > overriding an initializer if you enable -Wextra, which leads me to
> > believe this construct is dubious. It should at least be tested with
> > LLVM.
> > 
> > I'd much prefer replacing PINMUX_GPIO_GP_ALL() with a version that will
> > initialize the pins correctly right away.
> 
> [...]
> 
> Something like this?
> 
> diff --git a/drivers/pinctrl/sh-pfc/pfc-emev2.c
> b/drivers/pinctrl/sh-pfc/pfc-emev2.c index 849c6943ed30..ad1a8281a91b
> 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-emev2.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-emev2.c
> @@ -228,7 +228,7 @@ enum {
> 
>  /* Expand to a list of sh_pfc_pin entries (named PORT#).
>   * NOTE: No config are recorded since the driver do not handle pinconf. */
> -#define __PIN_CFG(pn, pfx, sfx)  SH_PFC_PIN_CFG(pfx, 0)
> +#define __PIN_CFG(pn, pfx, sfx)  SH_PFC_PORT_CFG(pfx, 0)
>  #define PINMUX_EMEV_GPIO_ALL()	  CPU_ALL_PORT(__PIN_CFG, , unused)
> 
>  static const struct sh_pfc_pin pinmux_pins[] = {
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c index 280a56f97786..ca1538371563
> 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> @@ -1272,8 +1272,8 @@ static const u16 pinmux_data[] = {
>  #define __IO	(SH_PFC_PIN_CFG_INPUT | SH_PFC_PIN_CFG_OUTPUT)
>  #define __PUD	(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
> 
> -#define R8A73A4_PIN_IO_PU_PD(pin)       SH_PFC_PIN_CFG(pin, __IO | __PUD)
> -#define R8A73A4_PIN_O(pin)              SH_PFC_PIN_CFG(pin, __O)
> +#define R8A73A4_PIN_IO_PU_PD(pin)       SH_PFC_PORT_CFG(pin, __IO | __PUD)
> +#define R8A73A4_PIN_O(pin)              SH_PFC_PORT_CFG(pin, __O)
> 
>  static const struct sh_pfc_pin pinmux_pins[] = {
>  	R8A73A4_PIN_IO_PU_PD(0), R8A73A4_PIN_IO_PU_PD(1),
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c index b486e9d20cc2..92939cbd7ad0
> 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> @@ -1535,15 +1535,15 @@ static const u16 pinmux_data[] = {
>  #define __PU		(SH_PFC_PIN_CFG_PULL_UP)
>  #define __PUD		(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
> 
> -#define R8A7740_PIN_I_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PD)
> -#define R8A7740_PIN_I_PU(pin)		SH_PFC_PIN_CFG(pin, __I | __PU)
> -#define R8A7740_PIN_I_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __I | __PUD)
> -#define R8A7740_PIN_IO(pin)		SH_PFC_PIN_CFG(pin, __IO)
> -#define R8A7740_PIN_IO_PD(pin)		SH_PFC_PIN_CFG(pin, __IO | __PD)
> -#define R8A7740_PIN_IO_PU(pin)		SH_PFC_PIN_CFG(pin, __IO | __PU)
> -#define R8A7740_PIN_IO_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __IO | __PUD)
> -#define R8A7740_PIN_O(pin)		SH_PFC_PIN_CFG(pin, __O)
> -#define R8A7740_PIN_O_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __O | __PUD)
> +#define R8A7740_PIN_I_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PD)
> +#define R8A7740_PIN_I_PU(pin)		SH_PFC_PORT_CFG(pin, __I | __PU)
> +#define R8A7740_PIN_I_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __I | __PUD)
> +#define R8A7740_PIN_IO(pin)		SH_PFC_PORT_CFG(pin, __IO)
> +#define R8A7740_PIN_IO_PD(pin)		SH_PFC_PORT_CFG(pin, __IO | __PD)
> +#define R8A7740_PIN_IO_PU(pin)		SH_PFC_PORT_CFG(pin, __IO | __PU)
> +#define R8A7740_PIN_IO_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __IO | __PUD)
> +#define R8A7740_PIN_O(pin)		SH_PFC_PORT_CFG(pin, __O)
> +#define R8A7740_PIN_O_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __O | __PUD)
> 
>  static const struct sh_pfc_pin pinmux_pins[] = {
>  	/* Table 56-1 (I/O and Pull U/D) */
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c index 1137bbc810cd..1e59e1775374
> 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> @@ -1740,20 +1740,23 @@ static const u16 pinmux_data[] = {
>  #define PIN_NUMBER(r, c) (((r) - 'A') * 31 + (c) + 200)
>  #define PIN_A_NUMBER(r, c) PIN_NUMBER(ROW_GROUP_A(r), c)
> 
> -#define PIN_IO_VOLTAGE(bank, _pin, _name, sfx)		\
> -	[RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_IO_VOLTAGE
> +/*
> + * All pins assigned to GPIO bank 3 can be used for SD interfaces in
> + * which case they support both 3.3V and 1.8V signalling.
> + */
> +#define GP_GPIO_IO_VOLTAGE(bank, _pin, _name, sfx)			\
> +	[RCAR_GP_PIN(bank, _pin)] =					\
> +		SH_PFC_GPIO_CFG(bank, _pin, _name, SH_PFC_PIN_CFG_IO_VOLTAGE)
> 
>  static const struct sh_pfc_pin pinmux_pins[] = {
> -	PINMUX_GPIO_GP_ALL(),
> -
> -	/*
> -	 * All pins assigned to GPIO bank 3 can be used for SD interfaces
> -	 * in which case they support both 3.3V and 1.8V signalling.
> -	 */
> -	PORT_GP_32(3, PIN_IO_VOLTAGE, unused),
> +	PORT_GP_32(0, _GP_GPIO, unused),
> +	PORT_GP_32(1, _GP_GPIO, unused),
> +	PORT_GP_32(2, _GP_GPIO, unused),
> +	PORT_GP_32(3, GP_GPIO_IO_VOLTAGE, unused),
> +	PORT_GP_32(4, _GP_GPIO, unused),
> +	PORT_GP_32(5, _GP_GPIO, unused),
> 
>  	/* Pins not associated with a GPIO port, placed after all the GPIOs */
> -	[RCAR_GP_PIN(5, 31) + 1] =
>  	SH_PFC_PIN_NAMED(ROW_GROUP_A('F'), 15, AF15),
>  	SH_PFC_PIN_NAMED(ROW_GROUP_A('G'), 15, AG15),
>  	SH_PFC_PIN_NAMED(ROW_GROUP_A('H'), 15, AH15),
> diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c index d2efbfb776ac..2c798550cd8c
> 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> @@ -1166,14 +1166,14 @@ static const u16 pinmux_data[] = {
>  #define __PU		(SH_PFC_PIN_CFG_PULL_UP)
>  #define __PUD		(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
> 
> -#define SH73A0_PIN_I_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PD)
> -#define SH73A0_PIN_I_PU(pin)		SH_PFC_PIN_CFG(pin, __I | __PU)
> -#define SH73A0_PIN_I_PU_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PUD)
> -#define SH73A0_PIN_IO(pin)		SH_PFC_PIN_CFG(pin, __IO)
> -#define SH73A0_PIN_IO_PD(pin)		SH_PFC_PIN_CFG(pin, __IO | __PD)
> -#define SH73A0_PIN_IO_PU(pin)		SH_PFC_PIN_CFG(pin, __IO | __PU)
> -#define SH73A0_PIN_IO_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __IO | __PUD)
> -#define SH73A0_PIN_O(pin)		SH_PFC_PIN_CFG(pin, __O)
> +#define SH73A0_PIN_I_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PD)
> +#define SH73A0_PIN_I_PU(pin)		SH_PFC_PORT_CFG(pin, __I | __PU)
> +#define SH73A0_PIN_I_PU_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PUD)
> +#define SH73A0_PIN_IO(pin)		SH_PFC_PORT_CFG(pin, __IO)
> +#define SH73A0_PIN_IO_PD(pin)		SH_PFC_PORT_CFG(pin, __IO | __PD)
> +#define SH73A0_PIN_IO_PU(pin)		SH_PFC_PORT_CFG(pin, __IO | __PU)
> +#define SH73A0_PIN_IO_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __IO | __PUD)
> +#define SH73A0_PIN_O(pin)		SH_PFC_PORT_CFG(pin, __O)
> 
>  /* Pin numbers for pins without a corresponding GPIO port number are
> computed * from the row and column numbers with a 1000 offset to avoid
> collisions with diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h
> b/drivers/pinctrl/sh-pfc/sh_pfc.h index 734f7a92229c..3eca740bba02 100644
> --- a/drivers/pinctrl/sh-pfc/sh_pfc.h
> +++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
> @@ -272,14 +272,18 @@ struct sh_pfc_soc_info {
>  		.enum_id = _pin##_DATA,					\
>  	}
> 
> -/* SH_PFC_PIN_CFG - Expand to a sh_pfc_pin entry (named PORT#) with config
> */
> -#define SH_PFC_PIN_CFG(_pin, cfgs)					\
> +/* SH_PFC_{PORT,GPIO}_CFG - Expand to a sh_pfc_pin entry with config */
> +#define _SH_PFC_PIN_CFG(_pin, _name, cfgs)				\
>  	{								\
>  		.pin = _pin,						\
> -		.name = __stringify(PORT##_pin),			\
> -		.enum_id = PORT##_pin##_DATA,				\
> +		.name = __stringify(_name),				\
> +		.enum_id = _name##_DATA,				\
>  		.configs = cfgs,					\
>  	}
> +#define SH_PFC_PORT_CFG(_pin, cfgs)				\
> +	_SH_PFC_PIN_CFG(PORT##_pin, PORT##_pin, cfgs)
> +#define SH_PFC_GPIO_CFG(bank, _pin, _name, cfgs)		\
> +	_SH_PFC_PIN_CFG((bank * 32) + _pin, _name, cfgs)
> 
>  /* SH_PFC_PIN_NAMED - Expand to a sh_pfc_pin entry with the given name */
>  #define SH_PFC_PIN_NAMED(row, col, _name)				\
> --- END ---
> 
> If you're happy with that, I'll re-send the series (hopefully for the
> last time!) with the r8a7790 changes squashed into "pinctrl: sh-pfc:
> r8a7790: Implement voltage switching for SDHI" and the SH_PFC_PIN_CFG
> macro change as a new patch before it.

That looks good to me. I'd split it in two patches though, one that reworks 
the existing macros (the drivers/pinctrl/sh-pfc/sh_pfc.h changes) and one that 
implements voltage switching for SDHI on r8a7790.

I would also avoid renaming SH_PFC_PIN_CFG to SH_PFC_PORT_CFG to avoid 
modifying unrelated files, you can name the low-level macro __SH_PFC_PIN_CFG 
and add

#define SH_PFC_PIN_CFG(_pin, cfgs)				\
	__SH_PFC_PIN_CFG(PORT##_pin, PORT##_pin, cfgs)

Additionally, your new SH_PFC_GPIO_CFG macro seems identical to _GP_GPIO now. 
It would make sense to merge the two.
Wolfram Sang Feb. 11, 2016, 1:53 p.m. UTC | #4
> > b/drivers/pinctrl/sh-pfc/sh_pfc.h index 734f7a92229c..3eca740bba02 100644
> > --- a/drivers/pinctrl/sh-pfc/sh_pfc.h
> > +++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
> > @@ -272,14 +272,18 @@ struct sh_pfc_soc_info {
> >  		.enum_id = _pin##_DATA,					\
> >  	}
> > 
> > -/* SH_PFC_PIN_CFG - Expand to a sh_pfc_pin entry (named PORT#) with config
> > */
> > -#define SH_PFC_PIN_CFG(_pin, cfgs)					\
> > +/* SH_PFC_{PORT,GPIO}_CFG - Expand to a sh_pfc_pin entry with config */
> > +#define _SH_PFC_PIN_CFG(_pin, _name, cfgs)				\
> >  	{								\
> >  		.pin = _pin,						\
> > -		.name = __stringify(PORT##_pin),			\
> > -		.enum_id = PORT##_pin##_DATA,				\
> > +		.name = __stringify(_name),				\
> > +		.enum_id = _name##_DATA,				\
> >  		.configs = cfgs,					\
> >  	}
> > +#define SH_PFC_PORT_CFG(_pin, cfgs)				\
> > +	_SH_PFC_PIN_CFG(PORT##_pin, PORT##_pin, cfgs)
> > +#define SH_PFC_GPIO_CFG(bank, _pin, _name, cfgs)		\
> > +	_SH_PFC_PIN_CFG((bank * 32) + _pin, _name, cfgs)
> > 
> >  /* SH_PFC_PIN_NAMED - Expand to a sh_pfc_pin entry with the given name */
> >  #define SH_PFC_PIN_NAMED(row, col, _name)				\
> > --- END ---
> > 
> > If you're happy with that, I'll re-send the series (hopefully for the
> > last time!) with the r8a7790 changes squashed into "pinctrl: sh-pfc:
> > r8a7790: Implement voltage switching for SDHI" and the SH_PFC_PIN_CFG
> > macro change as a new patch before it.
> 
> That looks good to me. I'd split it in two patches though, one that reworks 
> the existing macros (the drivers/pinctrl/sh-pfc/sh_pfc.h changes) and one that 
> implements voltage switching for SDHI on r8a7790.
> 
> I would also avoid renaming SH_PFC_PIN_CFG to SH_PFC_PORT_CFG to avoid 
> modifying unrelated files, you can name the low-level macro __SH_PFC_PIN_CFG 
> and add
> 
> #define SH_PFC_PIN_CFG(_pin, cfgs)				\
> 	__SH_PFC_PIN_CFG(PORT##_pin, PORT##_pin, cfgs)
> 
> Additionally, your new SH_PFC_GPIO_CFG macro seems identical to _GP_GPIO now. 
> It would make sense to merge the two.

It is identical. And since we meanwhile also have PORT_GP_CFG_32, I
wonder if we can't simply do this in CPU_ALL_PORT?

@@ -30,7 +31,7 @@
 	PORT_GP_32(0, fn, sfx),						\
 	PORT_GP_30(1, fn, sfx),						\
 	PORT_GP_30(2, fn, sfx),						\
-	PORT_GP_32(3, fn, sfx),						\
+	PORT_GP_CFG_32(3, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE),		\
 	PORT_GP_32(4, fn, sfx),						\
 	PORT_GP_32(5, fn, sfx)
 
And skip all the macro refactoring?

I'll test this once I have access to my Lager again, but though I'll let
you know already...

Thanks,

   Wolfram
diff mbox

Patch

diff --git a/drivers/pinctrl/sh-pfc/pfc-emev2.c b/drivers/pinctrl/sh-pfc/pfc-emev2.c
index 849c6943ed30..ad1a8281a91b 100644
--- a/drivers/pinctrl/sh-pfc/pfc-emev2.c
+++ b/drivers/pinctrl/sh-pfc/pfc-emev2.c
@@ -228,7 +228,7 @@  enum {
 
 /* Expand to a list of sh_pfc_pin entries (named PORT#).
  * NOTE: No config are recorded since the driver do not handle pinconf. */
-#define __PIN_CFG(pn, pfx, sfx)  SH_PFC_PIN_CFG(pfx, 0)
+#define __PIN_CFG(pn, pfx, sfx)  SH_PFC_PORT_CFG(pfx, 0)
 #define PINMUX_EMEV_GPIO_ALL()	  CPU_ALL_PORT(__PIN_CFG, , unused)
 
 static const struct sh_pfc_pin pinmux_pins[] = {
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
index 280a56f97786..ca1538371563 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
@@ -1272,8 +1272,8 @@  static const u16 pinmux_data[] = {
 #define __IO	(SH_PFC_PIN_CFG_INPUT | SH_PFC_PIN_CFG_OUTPUT)
 #define __PUD	(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
 
-#define R8A73A4_PIN_IO_PU_PD(pin)       SH_PFC_PIN_CFG(pin, __IO | __PUD)
-#define R8A73A4_PIN_O(pin)              SH_PFC_PIN_CFG(pin, __O)
+#define R8A73A4_PIN_IO_PU_PD(pin)       SH_PFC_PORT_CFG(pin, __IO | __PUD)
+#define R8A73A4_PIN_O(pin)              SH_PFC_PORT_CFG(pin, __O)
 
 static const struct sh_pfc_pin pinmux_pins[] = {
 	R8A73A4_PIN_IO_PU_PD(0), R8A73A4_PIN_IO_PU_PD(1),
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
index b486e9d20cc2..92939cbd7ad0 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
@@ -1535,15 +1535,15 @@  static const u16 pinmux_data[] = {
 #define __PU		(SH_PFC_PIN_CFG_PULL_UP)
 #define __PUD		(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
 
-#define R8A7740_PIN_I_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PD)
-#define R8A7740_PIN_I_PU(pin)		SH_PFC_PIN_CFG(pin, __I | __PU)
-#define R8A7740_PIN_I_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __I | __PUD)
-#define R8A7740_PIN_IO(pin)		SH_PFC_PIN_CFG(pin, __IO)
-#define R8A7740_PIN_IO_PD(pin)		SH_PFC_PIN_CFG(pin, __IO | __PD)
-#define R8A7740_PIN_IO_PU(pin)		SH_PFC_PIN_CFG(pin, __IO | __PU)
-#define R8A7740_PIN_IO_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __IO | __PUD)
-#define R8A7740_PIN_O(pin)		SH_PFC_PIN_CFG(pin, __O)
-#define R8A7740_PIN_O_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __O | __PUD)
+#define R8A7740_PIN_I_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PD)
+#define R8A7740_PIN_I_PU(pin)		SH_PFC_PORT_CFG(pin, __I | __PU)
+#define R8A7740_PIN_I_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __I | __PUD)
+#define R8A7740_PIN_IO(pin)		SH_PFC_PORT_CFG(pin, __IO)
+#define R8A7740_PIN_IO_PD(pin)		SH_PFC_PORT_CFG(pin, __IO | __PD)
+#define R8A7740_PIN_IO_PU(pin)		SH_PFC_PORT_CFG(pin, __IO | __PU)
+#define R8A7740_PIN_IO_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __IO | __PUD)
+#define R8A7740_PIN_O(pin)		SH_PFC_PORT_CFG(pin, __O)
+#define R8A7740_PIN_O_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __O | __PUD)
 
 static const struct sh_pfc_pin pinmux_pins[] = {
 	/* Table 56-1 (I/O and Pull U/D) */
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
index 1137bbc810cd..1e59e1775374 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
@@ -1740,20 +1740,23 @@  static const u16 pinmux_data[] = {
 #define PIN_NUMBER(r, c) (((r) - 'A') * 31 + (c) + 200)
 #define PIN_A_NUMBER(r, c) PIN_NUMBER(ROW_GROUP_A(r), c)
 
-#define PIN_IO_VOLTAGE(bank, _pin, _name, sfx)		\
-	[RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_IO_VOLTAGE
+/*
+ * All pins assigned to GPIO bank 3 can be used for SD interfaces in
+ * which case they support both 3.3V and 1.8V signalling.
+ */
+#define GP_GPIO_IO_VOLTAGE(bank, _pin, _name, sfx)			\
+	[RCAR_GP_PIN(bank, _pin)] =					\
+		SH_PFC_GPIO_CFG(bank, _pin, _name, SH_PFC_PIN_CFG_IO_VOLTAGE)
 
 static const struct sh_pfc_pin pinmux_pins[] = {
-	PINMUX_GPIO_GP_ALL(),
-
-	/*
-	 * All pins assigned to GPIO bank 3 can be used for SD interfaces
-	 * in which case they support both 3.3V and 1.8V signalling.
-	 */
-	PORT_GP_32(3, PIN_IO_VOLTAGE, unused),
+	PORT_GP_32(0, _GP_GPIO, unused),
+	PORT_GP_32(1, _GP_GPIO, unused),
+	PORT_GP_32(2, _GP_GPIO, unused),
+	PORT_GP_32(3, GP_GPIO_IO_VOLTAGE, unused),
+	PORT_GP_32(4, _GP_GPIO, unused),
+	PORT_GP_32(5, _GP_GPIO, unused),
 
 	/* Pins not associated with a GPIO port, placed after all the GPIOs */
-	[RCAR_GP_PIN(5, 31) + 1] =
 	SH_PFC_PIN_NAMED(ROW_GROUP_A('F'), 15, AF15),
 	SH_PFC_PIN_NAMED(ROW_GROUP_A('G'), 15, AG15),
 	SH_PFC_PIN_NAMED(ROW_GROUP_A('H'), 15, AH15),
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
index d2efbfb776ac..2c798550cd8c 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
@@ -1166,14 +1166,14 @@  static const u16 pinmux_data[] = {
 #define __PU		(SH_PFC_PIN_CFG_PULL_UP)
 #define __PUD		(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
 
-#define SH73A0_PIN_I_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PD)
-#define SH73A0_PIN_I_PU(pin)		SH_PFC_PIN_CFG(pin, __I | __PU)
-#define SH73A0_PIN_I_PU_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PUD)
-#define SH73A0_PIN_IO(pin)		SH_PFC_PIN_CFG(pin, __IO)
-#define SH73A0_PIN_IO_PD(pin)		SH_PFC_PIN_CFG(pin, __IO | __PD)
-#define SH73A0_PIN_IO_PU(pin)		SH_PFC_PIN_CFG(pin, __IO | __PU)
-#define SH73A0_PIN_IO_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __IO | __PUD)
-#define SH73A0_PIN_O(pin)		SH_PFC_PIN_CFG(pin, __O)
+#define SH73A0_PIN_I_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PD)
+#define SH73A0_PIN_I_PU(pin)		SH_PFC_PORT_CFG(pin, __I | __PU)
+#define SH73A0_PIN_I_PU_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PUD)
+#define SH73A0_PIN_IO(pin)		SH_PFC_PORT_CFG(pin, __IO)
+#define SH73A0_PIN_IO_PD(pin)		SH_PFC_PORT_CFG(pin, __IO | __PD)
+#define SH73A0_PIN_IO_PU(pin)		SH_PFC_PORT_CFG(pin, __IO | __PU)
+#define SH73A0_PIN_IO_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __IO | __PUD)
+#define SH73A0_PIN_O(pin)		SH_PFC_PORT_CFG(pin, __O)
 
 /* Pin numbers for pins without a corresponding GPIO port number are computed
  * from the row and column numbers with a 1000 offset to avoid collisions with
diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h
index 734f7a92229c..3eca740bba02 100644
--- a/drivers/pinctrl/sh-pfc/sh_pfc.h
+++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
@@ -272,14 +272,18 @@  struct sh_pfc_soc_info {
 		.enum_id = _pin##_DATA,					\
 	}
 
-/* SH_PFC_PIN_CFG - Expand to a sh_pfc_pin entry (named PORT#) with config */
-#define SH_PFC_PIN_CFG(_pin, cfgs)					\
+/* SH_PFC_{PORT,GPIO}_CFG - Expand to a sh_pfc_pin entry with config */
+#define _SH_PFC_PIN_CFG(_pin, _name, cfgs)				\
 	{								\
 		.pin = _pin,						\
-		.name = __stringify(PORT##_pin),			\
-		.enum_id = PORT##_pin##_DATA,				\
+		.name = __stringify(_name),				\
+		.enum_id = _name##_DATA,				\
 		.configs = cfgs,					\
 	}
+#define SH_PFC_PORT_CFG(_pin, cfgs)				\
+	_SH_PFC_PIN_CFG(PORT##_pin, PORT##_pin, cfgs)
+#define SH_PFC_GPIO_CFG(bank, _pin, _name, cfgs)		\
+	_SH_PFC_PIN_CFG((bank * 32) + _pin, _name, cfgs)
 
 /* SH_PFC_PIN_NAMED - Expand to a sh_pfc_pin entry with the given name */
 #define SH_PFC_PIN_NAMED(row, col, _name)				\
--- END ---