@@ -84,6 +84,7 @@ struct sci_port {
unsigned int overrun_reg;
unsigned int overrun_mask;
unsigned int error_mask;
+ unsigned int error_clear;
unsigned int sampling_rate;
resource_size_t reg_size;
@@ -2319,15 +2320,22 @@ static int sci_init_single(struct platform_device *dev,
/*
* Establish some sensible defaults for the error detection.
*/
- sci_port->error_mask = (p->type == PORT_SCI) ?
- SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
+ if (p->type == PORT_SCI) {
+ sci_port->error_mask = SCI_DEFAULT_ERROR_MASK;
+ sci_port->error_clear = SCI_ERROR_CLEAR;
+ } else {
+ sci_port->error_mask = SCIF_DEFAULT_ERROR_MASK;
+ sci_port->error_clear = SCIF_ERROR_CLEAR;
+ }
/*
* Make the error mask inclusive of overrun detection, if
* supported.
*/
- if (sci_port->overrun_reg == SCxSR)
+ if (sci_port->overrun_reg == SCxSR) {
sci_port->error_mask |= sci_port->overrun_mask;
+ sci_port->error_clear &= ~sci_port->overrun_mask;
+ }
port->type = p->type;
port->flags = UPF_FIXED_PORT | p->flags;
@@ -77,7 +77,7 @@ enum {
#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER)
#define SCIF_RDxF_CLEAR ~(SCIF_DR | SCIF_RDF)
-#define SCIF_ERROR_CLEAR ~(SCIFA_ORER | SCIF_PER | SCIF_FER | SCIF_ER)
+#define SCIF_ERROR_CLEAR ~(SCIF_PER | SCIF_FER | SCIF_ER)
#define SCIF_TDxE_CLEAR ~(SCIF_TDFE)
#define SCIF_BREAK_CLEAR ~(SCIF_PER | SCIF_FER | SCIF_BRK)
@@ -122,7 +122,7 @@ enum {
#define SCxSR_RDxF_CLEAR(port) \
(((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR)
#define SCxSR_ERROR_CLEAR(port) \
- (((port)->type == PORT_SCI) ? SCI_ERROR_CLEAR : SCIF_ERROR_CLEAR)
+ (to_sci_port(port)->error_clear)
#define SCxSR_TDxE_CLEAR(port) \
(((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR)
#define SCxSR_BREAK_CLEAR(port) \
SCIF_ERROR_CLEAR includes SCIFA_ORER, which exists only on SCIFA/SCIFB and SCIF on sh7705/sh7720/sh7721. To fix this: 1. Remove SCIFA_ORER from the definition of SCIF_ERROR_CLEAR, 2. During initialization, store the error clear mask to use, incorporating the overrun bit only if it applies to the SCxSR register. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/tty/serial/sh-sci.c | 14 +++++++++++--- drivers/tty/serial/sh-sci.h | 4 ++-- 2 files changed, 13 insertions(+), 5 deletions(-)