diff mbox

[PATCH/RFC,net-next,v3,3/4] ravb: Document binding for r8a7795 SoC

Message ID 1442556203-657-4-git-send-email-horms+renesas@verge.net.au (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Simon Horman Sept. 18, 2015, 6:03 a.m. UTC
From: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>

This patch updates the ravb binding to support the r8a7795 SoC by:
- Adding a compat string for the new hardware
- Adding 25 named interrupts to binding for the new SoC;
  older SoCs continue to use a single multiplexed interrupt

The example is also updated to reflect the r8a7795 as this is the
more complex case.

Based on work by Kazuya Mizuguchi and others.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

---
v2
* First post; broken out of a driver update patch
* As discussed with Geert Uytterhoeven and Sergei Shtylyov
  - Binding: Make all interrupts mandatory as named-interrupts of
    the form ch%u

v3
* A suggested by Geert Uytterhoeven
  - Reword description of interrupts and interrupt-names to
    make things clearer. It is now based to some extent on
    spi-rspi.txt and renesas,usb-dmac.txt.
* As suggested by Sergei Shtylyov
  - Drop phy-reset-gpio from example
* Added power-domains to example
---
 .../devicetree/bindings/net/renesas,ravb.txt       | 69 +++++++++++++++++++---
 1 file changed, 62 insertions(+), 7 deletions(-)

Comments

Geert Uytterhoeven Sept. 18, 2015, 7:27 a.m. UTC | #1
On Fri, Sep 18, 2015 at 8:03 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> From: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
>
> This patch updates the ravb binding to support the r8a7795 SoC by:
> - Adding a compat string for the new hardware
> - Adding 25 named interrupts to binding for the new SoC;
>   older SoCs continue to use a single multiplexed interrupt
>
> The example is also updated to reflect the r8a7795 as this is the
> more complex case.
>
> Based on work by Kazuya Mizuguchi and others.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Modulo the minor nit below...

> --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
> +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt

> @@ -18,6 +22,12 @@ Required properties:
>  Optional properties:
>  - interrupt-parent: the phandle for the interrupt controller that services
>                     interrupts for this device.
> +- interrupt-names: A list of interrupt names.
> +                  For the R8A7795 SoC this property is mandatory;
> +                  it should include one entry per channel, named "ch%u",
> +                  where %u is the channel number ranging from 0 to 24.
> +                  For other SoCs this property is optional; if present
> +                  is should contain "mux" for a single muxed interrupt.

it

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Simon Horman Sept. 21, 2015, 12:27 a.m. UTC | #2
On Fri, Sep 18, 2015 at 09:27:11AM +0200, Geert Uytterhoeven wrote:
> On Fri, Sep 18, 2015 at 8:03 AM, Simon Horman
> <horms+renesas@verge.net.au> wrote:
> > From: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
> >
> > This patch updates the ravb binding to support the r8a7795 SoC by:
> > - Adding a compat string for the new hardware
> > - Adding 25 named interrupts to binding for the new SoC;
> >   older SoCs continue to use a single multiplexed interrupt
> >
> > The example is also updated to reflect the r8a7795 as this is the
> > more complex case.
> >
> > Based on work by Kazuya Mizuguchi and others.
> >
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> 
> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
> 
> Modulo the minor nit below...
> 
> > --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
> > +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
> 
> > @@ -18,6 +22,12 @@ Required properties:
> >  Optional properties:
> >  - interrupt-parent: the phandle for the interrupt controller that services
> >                     interrupts for this device.
> > +- interrupt-names: A list of interrupt names.
> > +                  For the R8A7795 SoC this property is mandatory;
> > +                  it should include one entry per channel, named "ch%u",
> > +                  where %u is the channel number ranging from 0 to 24.
> > +                  For other SoCs this property is optional; if present
> > +                  is should contain "mux" for a single muxed interrupt.
> 
> it

Thanks, I will fix that.
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index 1fd8831437bf..ae454d9df136 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -6,8 +6,12 @@  interface contains.
 Required properties:
 - compatible: "renesas,etheravb-r8a7790" if the device is a part of R8A7790 SoC.
 	      "renesas,etheravb-r8a7794" if the device is a part of R8A7794 SoC.
+	      "renesas,etheravb-r8a7795" if the device is a part of R8A7795 SoC.
 - reg: offset and length of (1) the register block and (2) the stream buffer.
-- interrupts: interrupt specifier for the sole interrupt.
+- interrupts: A list of interrupt-specifiers, one for each entry in
+	      interrupt-names.
+	      If interrupt-names is not present, an interrupt specifier
+	      for a single muxed interrupt.
 - phy-mode: see ethernet.txt file in the same directory.
 - phy-handle: see ethernet.txt file in the same directory.
 - #address-cells: number of address cells for the MDIO bus, must be equal to 1.
@@ -18,6 +22,12 @@  Required properties:
 Optional properties:
 - interrupt-parent: the phandle for the interrupt controller that services
 		    interrupts for this device.
+- interrupt-names: A list of interrupt names.
+		   For the R8A7795 SoC this property is mandatory;
+		   it should include one entry per channel, named "ch%u",
+		   where %u is the channel number ranging from 0 to 24.
+		   For other SoCs this property is optional; if present
+		   is should contain "mux" for a single muxed interrupt.
 - pinctrl-names: pin configuration state name ("default").
 - renesas,no-ether-link: boolean, specify when a board does not provide a proper
 			 AVB_LINK signal.
@@ -27,13 +37,46 @@  Optional properties:
 Example:
 
 	ethernet@e6800000 {
-		compatible = "renesas,etheravb-r8a7790";
-		reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+		compatible = "renesas,etheravb-r8a7795";
+		reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
 		interrupt-parent = <&gic>;
-		interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
-		phy-mode = "rmii";
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "ch0", "ch1", "ch2", "ch3",
+				  "ch4", "ch5", "ch6", "ch7",
+				  "ch8", "ch9", "ch10", "ch11",
+				  "ch12", "ch13", "ch14", "ch15",
+				  "ch16", "ch17", "ch18", "ch19",
+				  "ch20", "ch21", "ch22", "ch23",
+				  "ch24";
+		clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
+		power-domains = <&cpg_clocks>;
+		phy-mode = "rgmii-id";
 		phy-handle = <&phy0>;
+
 		pinctrl-0 = <&ether_pins>;
 		pinctrl-names = "default";
 		renesas,no-ether-link;
@@ -41,8 +84,20 @@  Example:
 		#size-cells = <0>;
 
 		phy0: ethernet-phy@0 {
+			rxc-skew-ps = <900>;
+			rxdv-skew-ps = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txc-skew-ps = <900>;
+			txen-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
 			reg = <0>;
 			interrupt-parent = <&gpio2>;
-			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};