diff mbox

[v3,07/11] i2c: rcar: don't issue stop when HW does it automatically

Message ID 1447948611-2615-8-git-send-email-wsa@the-dreams.de (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Wolfram Sang Nov. 19, 2015, 3:56 p.m. UTC
From: Wolfram Sang <wsa+renesas@sang-engineering.com>

The manual says (55.4.8.6) that HW does automatically send STOP after
NACK was received. My measuerments confirm that.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-rcar.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index d91acc11631554..87fccf20fc4c34 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -455,8 +455,8 @@  static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
 
 	/* Nack */
 	if (msr & MNR) {
-		/* go to stop phase */
-		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
+		/* HW automatically sends STOP after received NACK */
+		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA);
 		rcar_i2c_write(priv, ICMIER, RCAR_IRQ_STOP);
 		rcar_i2c_flags_set(priv, ID_NACK);
 		goto out;