diff mbox

[v2,1/2] pinctrl: sh-pfc: r8a7795: Add pinmux data for single-function pins

Message ID 1448891379-2457-2-git-send-email-geert+renesas@glider.be (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Geert Uytterhoeven Nov. 30, 2015, 1:49 p.m. UTC
Pins that (1) can be configured as either GPIO or a single peripheral
function, and (2) that don't need configuration in an IPSRx register,
should still be listed in the pinmux_data[] array.

Else selecting the peripheral function fails with e.g.:

    sh-pfc e6060000.pfc: cannot locate data/mark enum_id for mark 1281

(mark 1281 is MSIOF0_SCK_MARK).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
This depends on "pinctrl: sh-pfc: Add PINMUX_SINGLE()".

v2:
  - Use PINMUX_SINGLE() instead of raw PINMUX_DATA().
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
diff mbox

Patch

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 678c3801e999453c..e9dafe3d3320eb9f 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -580,6 +580,25 @@  enum {
 static const u16 pinmux_data[] = {
 	PINMUX_DATA_GP_ALL(),
 
+	PINMUX_SINGLE(AVS1),
+	PINMUX_SINGLE(AVS2),
+	PINMUX_SINGLE(HDMI0_CEC),
+	PINMUX_SINGLE(HDMI1_CEC),
+	PINMUX_SINGLE(MSIOF0_RXD),
+	PINMUX_SINGLE(MSIOF0_SCK),
+	PINMUX_SINGLE(MSIOF0_TXD),
+	PINMUX_SINGLE(SD2_CMD),
+	PINMUX_SINGLE(SD3_CLK),
+	PINMUX_SINGLE(SD3_CMD),
+	PINMUX_SINGLE(SD3_DAT0),
+	PINMUX_SINGLE(SD3_DAT1),
+	PINMUX_SINGLE(SD3_DAT2),
+	PINMUX_SINGLE(SD3_DAT3),
+	PINMUX_SINGLE(SD3_DS),
+	PINMUX_SINGLE(SSI_SCK5),
+	PINMUX_SINGLE(SSI_SDATA5),
+	PINMUX_SINGLE(SSI_WS5),
+
 	/* IPSR0 */
 	PINMUX_IPSR_GPSR(IP0_3_0,	AVB_MDC),
 	PINMUX_IPSR_MSEL(IP0_3_0,	MSIOF2_SS2_C,		SEL_MSIOF2_2),