diff mbox

[1/9] i2c: document generic DT bindings for timing parameters

Message ID 1449157899-6572-2-git-send-email-wsa@the-dreams.de (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Wolfram Sang Dec. 3, 2015, 3:51 p.m. UTC
From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Also, sort the properties alphabetically and make indentation
consistent. Wording largely taken from i2c-rk3x.txt, thanks guys!

Only "i2c-scl-internal-delay-ns" is new, the rest is used by two drivers
already and was documented in their driver binding documentation.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: devicetree@vger.kernel.org
---
 Documentation/devicetree/bindings/i2c/i2c.txt | 31 ++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

Comments

Rob Herring (Arm) Dec. 3, 2015, 8:39 p.m. UTC | #1
On Thu, Dec 03, 2015 at 04:51:31PM +0100, Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> Also, sort the properties alphabetically and make indentation
> consistent. Wording largely taken from i2c-rk3x.txt, thanks guys!
> 
> Only "i2c-scl-internal-delay-ns" is new, the rest is used by two drivers
> already and was documented in their driver binding documentation.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Cc: devicetree@vger.kernel.org

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  Documentation/devicetree/bindings/i2c/i2c.txt | 31 ++++++++++++++++++++++-----
>  1 file changed, 26 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
> index 8a99150ac3a7fd..a00219f5ee0733 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c.txt
> @@ -29,12 +29,33 @@ Optional properties
>  These properties may not be supported by all drivers. However, if a driver
>  wants to support one of the below features, it should adapt the bindings below.
>  
> -- clock-frequency	- frequency of bus clock in Hz.
> -- wakeup-source		- device can be used as a wakeup source.
> +- clock-frequency
> +	frequency of bus clock in Hz.
>  
> -- interrupts		- interrupts used by the device.
> -- interrupt-names	- "irq" and "wakeup" names are recognized by I2C core,
> -			  other names are left to individual drivers.
> +- i2c-scl-falling-time-ns
> +	Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
> +	specification.
> +
> +- i2c-scl-internal-delay-ns
> +	Number of nanoseconds the IP core additionally needs to setup SCL.
> +
> +- i2c-scl-rising-time-ns
> +	Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
> +	specification.
> +
> +- i2c-sda-falling-time-ns
> +	Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
> +	specification.
> +
> +- interrupts
> +	interrupts used by the device.
> +
> +- interrupt-names
> +	"irq" and "wakeup" names are recognized by I2C core, other names are
> +	left to individual drivers.
> +
> +- wakeup-source
> +	device can be used as a wakeup source.
>  
>  Binding may contain optional "interrupts" property, describing interrupts
>  used by the device. I2C core will assign "irq" interrupt (or the very first
> -- 
> 2.1.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index 8a99150ac3a7fd..a00219f5ee0733 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -29,12 +29,33 @@  Optional properties
 These properties may not be supported by all drivers. However, if a driver
 wants to support one of the below features, it should adapt the bindings below.
 
-- clock-frequency	- frequency of bus clock in Hz.
-- wakeup-source		- device can be used as a wakeup source.
+- clock-frequency
+	frequency of bus clock in Hz.
 
-- interrupts		- interrupts used by the device.
-- interrupt-names	- "irq" and "wakeup" names are recognized by I2C core,
-			  other names are left to individual drivers.
+- i2c-scl-falling-time-ns
+	Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
+	specification.
+
+- i2c-scl-internal-delay-ns
+	Number of nanoseconds the IP core additionally needs to setup SCL.
+
+- i2c-scl-rising-time-ns
+	Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
+	specification.
+
+- i2c-sda-falling-time-ns
+	Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
+	specification.
+
+- interrupts
+	interrupts used by the device.
+
+- interrupt-names
+	"irq" and "wakeup" names are recognized by I2C core, other names are
+	left to individual drivers.
+
+- wakeup-source
+	device can be used as a wakeup source.
 
 Binding may contain optional "interrupts" property, describing interrupts
 used by the device. I2C core will assign "irq" interrupt (or the very first