diff mbox

[2/3] arm64: dts: r8a7795: Add Cortex-A57 CPU cores

Message ID 1449236333-4410-2-git-send-email-dirk.behme@gmail.com (mailing list archive)
State Accepted
Commit 0ed1a79ed0c17631fb41d336a4eddb9bbd299b64
Delegated to: Simon Horman
Headers show

Commit Message

Dirk Behme Dec. 4, 2015, 1:38 p.m. UTC
From: Gaku Inami <gaku.inami.xw@bp.renesas.com>

Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.

Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>
---

Note: This patch picked from

https://git.kernel.org/cgit/linux/kernel/git/horms/renesas-bsp.git/log/?h=v4.2/rcar-3.0.x

and rebased against

https://git.kernel.org/cgit/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/gen3-latest renesas-drivers-2015-12-01-v4.4-rc3

 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 31 +++++++++++++++++++++++++------
 1 file changed, 25 insertions(+), 6 deletions(-)

Comments

Simon Horman Dec. 11, 2015, 11:07 p.m. UTC | #1
On Fri, Dec 04, 2015 at 02:38:52PM +0100, Dirk Behme wrote:
> From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
> 
> Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.
> 
> Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>

Thanks, I have queued this up for v4.5.
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Simon Horman Dec. 15, 2015, 5:12 a.m. UTC | #2
On Sat, Dec 12, 2015 at 08:07:51AM +0900, Simon Horman wrote:
> On Fri, Dec 04, 2015 at 02:38:52PM +0100, Dirk Behme wrote:
> > From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
> > 
> > Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.
> > 
> > Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
> > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> > Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>
> 
> Thanks, I have queued this up for v4.5.

I meant to test this earlier but somehow it slopped my mind.

With this patch applied I still only see one CPU brought up
whereas I was expecting 4. Are more patches needed in order to
get more CPUs operating?

I am using renesas-devel-20151214-v4.4-rc5 + the cpg-mmsr driver (v6).
I built the kernel using the defconfig.
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Dirk Behme Dec. 15, 2015, 6:31 a.m. UTC | #3
On 15.12.2015 06:12, Simon Horman wrote:
> On Sat, Dec 12, 2015 at 08:07:51AM +0900, Simon Horman wrote:
>> On Fri, Dec 04, 2015 at 02:38:52PM +0100, Dirk Behme wrote:
>>> From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>>>
>>> Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.
>>>
>>> Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>>> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>>> Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>
>>
>> Thanks, I have queued this up for v4.5.
>
> I meant to test this earlier but somehow it slopped my mind.
>
> With this patch applied I still only see one CPU brought up
> whereas I was expecting 4. Are more patches needed in order to
> get more CPUs operating?


Hmm, I don't think so (?).

I tested this with

https://github.com/dirkbehme/linux-renesas-rcar-gen3/commits/dirk/gen3-latest-update

and got (including the A53 patch)

...
ASID allocator initialised with 65536 entries

Detected PIPT I-cache on CPU1

CPU1: Booted secondary processor [411fd073]

Detected PIPT I-cache on CPU2

CPU2: Booted secondary processor [411fd073]

Detected PIPT I-cache on CPU3

CPU3: Booted secondary processor [411fd073]

Detected VIPT I-cache on CPU4

CPU features: enabling workaround for ARM erratum 845719

CPU4: Booted secondary processor [410fd034]

Detected VIPT I-cache on CPU5

CPU5: Booted secondary processor [410fd034]

Detected VIPT I-cache on CPU6

CPU6: Booted secondary processor [410fd034]

Detected VIPT I-cache on CPU7

CPU7: Booted secondary processor [410fd034]

Brought up 8 CPUs

SMP: Total of 8 processors activated.

CPU: All CPU(s) started at EL1
...

This is based on last weeks renesas-drivers-2015-12-08-v4.4-rc4 and 
besides the patches for SDHI/eMMC I don't think it contains anything 
additional regarding the number of CPU cores.

Best regards

Dirk

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Geert Uytterhoeven Dec. 15, 2015, 8:23 a.m. UTC | #4
Hi Simon,

On Tue, Dec 15, 2015 at 6:12 AM, Simon Horman <horms@verge.net.au> wrote:
> On Sat, Dec 12, 2015 at 08:07:51AM +0900, Simon Horman wrote:
>> On Fri, Dec 04, 2015 at 02:38:52PM +0100, Dirk Behme wrote:
>> > From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>> >
>> > Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.
>> >
>> > Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>> > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>> > Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>
>>
>> Thanks, I have queued this up for v4.5.
>
> I meant to test this earlier but somehow it slopped my mind.
>
> With this patch applied I still only see one CPU brought up
> whereas I was expecting 4. Are more patches needed in order to
> get more CPUs operating?
>
> I am using renesas-devel-20151214-v4.4-rc5 + the cpg-mmsr driver (v6).
> I built the kernel using the defconfig.

I can confirm I saw 4 CPUs online as soon as I had merged renesas-devel
containing the above change into my tree (which was based on
renesas-drivers-2015-12-08-v4.4-rc4 at that time).

I was surprised to see it was that simple to enable the 3 other cores ;-)

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Magnus Damm Dec. 15, 2015, 8:38 a.m. UTC | #5
Hi Simon,

On Sat, Dec 12, 2015 at 8:07 AM, Simon Horman <horms@verge.net.au> wrote:
> On Fri, Dec 04, 2015 at 02:38:52PM +0100, Dirk Behme wrote:
>> From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>>
>> Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.
>>
>> Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>> Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>
>
> Thanks, I have queued this up for v4.5.

Thanks. May I ask if CPU hotplug is known to work? Also, which version
of the boot loader stack is required?

Best,

/ magnus
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Dirk Behme Dec. 15, 2015, 8:48 a.m. UTC | #6
On 15.12.2015 09:38, Magnus Damm wrote:
> Hi Simon,
>
> On Sat, Dec 12, 2015 at 8:07 AM, Simon Horman <horms@verge.net.au> wrote:
>> On Fri, Dec 04, 2015 at 02:38:52PM +0100, Dirk Behme wrote:
>>> From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>>>
>>> Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.
>>>
>>> Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>>> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>>> Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>
>>
>> Thanks, I have queued this up for v4.5.
>
> Thanks. May I ask if CPU hotplug is known to work?


I didn't test that.


> Also, which version
> of the boot loader stack is required?


I've the U-Boot / boot loader stack from BSP v3.0.2 on the board. I 
haven't tested v3.0.3, yet.


Best regards

Dirk

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Magnus Damm Dec. 15, 2015, 8:55 a.m. UTC | #7
Hi Dirk,

On Tue, Dec 15, 2015 at 5:48 PM, Dirk Behme <dirk.behme@gmail.com> wrote:
> On 15.12.2015 09:38, Magnus Damm wrote:
>>
>> Hi Simon,
>>
>> On Sat, Dec 12, 2015 at 8:07 AM, Simon Horman <horms@verge.net.au> wrote:
>>>
>>> On Fri, Dec 04, 2015 at 02:38:52PM +0100, Dirk Behme wrote:
>>>>
>>>> From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>>>>
>>>> Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.
>>>>
>>>> Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>>>> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>>>> Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>
>>>
>>>
>>> Thanks, I have queued this up for v4.5.
>>
>>
>> Thanks. May I ask if CPU hotplug is known to work?
>
>
>
> I didn't test that.

Ok, no worries. I feel that there are various CPU related features
that need a bit of testing to make sure support is stable enough to
enable without causing issues for other on-going development.

CPU Hotplug is one of those, another is kernel command line options
like maxcpus, and kexec would be good to have working as well. To make
things a bit more complicated, there is a rather complicated software
stack with trusted code installed by the boot loader, so there is a
dependency on that as well. On earlier SoCs from previous generations
there were issues with shared reset vectors and a watchdog, so SMP
support may affect watchdog too...

>> Also, which version
>> of the boot loader stack is required?
>
> I've the U-Boot / boot loader stack from BSP v3.0.2 on the board. I haven't
> tested v3.0.3, yet.

Thanks for sharing!

Cheers,

/ magnus
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Simon Horman March 16, 2016, 1:19 a.m. UTC | #8
Hi Dirk,

On Tue, Dec 15, 2015 at 09:48:46AM +0100, Dirk Behme wrote:
> On 15.12.2015 09:38, Magnus Damm wrote:
> >Hi Simon,
> >
> >On Sat, Dec 12, 2015 at 8:07 AM, Simon Horman <horms@verge.net.au> wrote:
> >>On Fri, Dec 04, 2015 at 02:38:52PM +0100, Dirk Behme wrote:
> >>>From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
> >>>
> >>>Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.
> >>>
> >>>Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
> >>>Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> >>>Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>
> >>
> >>Thanks, I have queued this up for v4.5.
> >
> >Thanks. May I ask if CPU hotplug is known to work?
> 
> 
> I didn't test that.

As a follow-up I am wondering if you subsequently observed CPU hotplug
working. My recent testing on v4.5 indicates that it isn't working in my
environment. It would be quite valuable to know if it has ever been known
to work.

> >Also, which version
> >of the boot loader stack is required?
> 
> 
> I've the U-Boot / boot loader stack from BSP v3.0.2 on the board. I haven't
> tested v3.0.3, yet.

For reference my environment is as follows:


    NOTICE:  BL2: R-Car H3 Loader Rev.1.0.1
    NOTICE:  BL2: DDR1600(rev.0.10)
    NOTICE:  BL2: DRAM Split is 4ch
    NOTICE:  BL2: QoS is Gfx Oriented(rev.0.24A)
    NOTICE:  BL2: v1.1(release):41099f4
    NOTICE:  BL2: Built : 11:47:26, Nov 19 2015
    NOTICE:  BL2: Normal boot
    NOTICE:  BL2: memdrv_block_read dst=0xe630e0b0 src=0x8180000 len=36(0x24)
    NOTICE:  BL2: memdrv_block_read dst=0x43f00000 src=0x8180400 len=3072(0xc00)
    NOTICE:  BL2: memdrv_block_read dst=0x44000000 src=0x81c0000 len=65536(0x10000)
    NOTICE:  BL2: memdrv_block_read dst=0x44100000 src=0x8200000 len=524288(0x80000)
    NOTICE:  BL2: memdrv_block_read dst=0x49000000 src=0x8640000 len=1048576(0x100000)

    U-Boot 2015.04 (Nov 19 2015 - 11:47:49)

    CPU: Renesas Electronics CPU rev 1.0
    Board: Salvator-X
    DRAM:  896 MiB
    MMC:   sh-sdhi: 0, sh-sdhi: 1, sh-sdhi: 2
    In:    serial
    Out:   serial
    Err:   serial
    Net:   ravb
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
khiemnguyen March 16, 2016, 3:45 a.m. UTC | #9
Hi Simon, Dirk, Magnus,

On 3/16/2016 8:19 AM, Simon Horman wrote:
> Hi Dirk,
>
> On Tue, Dec 15, 2015 at 09:48:46AM +0100, Dirk Behme wrote:
>> On 15.12.2015 09:38, Magnus Damm wrote:
>>> Hi Simon,
>>>
>>> On Sat, Dec 12, 2015 at 8:07 AM, Simon Horman <horms@verge.net.au> wrote:
>>>> On Fri, Dec 04, 2015 at 02:38:52PM +0100, Dirk Behme wrote:
>>>>> From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>>>>>
>>>>> Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.
>>>>>
>>>>> Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>>>>> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>>>>> Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>
>>>>
>>>> Thanks, I have queued this up for v4.5.
>>>
>>> Thanks. May I ask if CPU hotplug is known to work?
>>
>>
>> I didn't test that.
>
> As a follow-up I am wondering if you subsequently observed CPU hotplug
> working. My recent testing on v4.5 indicates that it isn't working in my
> environment. It would be quite valuable to know if it has ever been known
> to work.
>
>>> Also, which version
>>> of the boot loader stack is required?

Yes. CPUHotplug will be supported in boot loader stack released by Dec 
2015 and later.

>>
>> I've the U-Boot / boot loader stack from BSP v3.0.2 on the board. I haven't
>> tested v3.0.3, yet.
>
> For reference my environment is as follows:
>
>
>      NOTICE:  BL2: R-Car H3 Loader Rev.1.0.1
>      NOTICE:  BL2: DDR1600(rev.0.10)
>      NOTICE:  BL2: DRAM Split is 4ch
>      NOTICE:  BL2: QoS is Gfx Oriented(rev.0.24A)
>      NOTICE:  BL2: v1.1(release):41099f4
>      NOTICE:  BL2: Built : 11:47:26, Nov 19 2015
>      NOTICE:  BL2: Normal boot
>      NOTICE:  BL2: memdrv_block_read dst=0xe630e0b0 src=0x8180000 len=36(0x24)
>      NOTICE:  BL2: memdrv_block_read dst=0x43f00000 src=0x8180400 len=3072(0xc00)
>      NOTICE:  BL2: memdrv_block_read dst=0x44000000 src=0x81c0000 len=65536(0x10000)
>      NOTICE:  BL2: memdrv_block_read dst=0x44100000 src=0x8200000 len=524288(0x80000)
>      NOTICE:  BL2: memdrv_block_read dst=0x49000000 src=0x8640000 len=1048576(0x100000)
>
>      U-Boot 2015.04 (Nov 19 2015 - 11:47:49)
>
>      CPU: Renesas Electronics CPU rev 1.0
>      Board: Salvator-X
>      DRAM:  896 MiB
>      MMC:   sh-sdhi: 0, sh-sdhi: 1, sh-sdhi: 2
>      In:    serial
>      Out:   serial
>      Err:   serial
>      Net:   ravb
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
Simon Horman March 16, 2016, 5:36 a.m. UTC | #10
On Wed, Mar 16, 2016 at 10:45:10AM +0700, Khiem Nguyen wrote:
> Hi Simon, Dirk, Magnus,
> 
> On 3/16/2016 8:19 AM, Simon Horman wrote:
> >Hi Dirk,
> >
> >On Tue, Dec 15, 2015 at 09:48:46AM +0100, Dirk Behme wrote:
> >>On 15.12.2015 09:38, Magnus Damm wrote:
> >>>Hi Simon,
> >>>
> >>>On Sat, Dec 12, 2015 at 8:07 AM, Simon Horman <horms@verge.net.au> wrote:
> >>>>On Fri, Dec 04, 2015 at 02:38:52PM +0100, Dirk Behme wrote:
> >>>>>From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
> >>>>>
> >>>>>Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.
> >>>>>
> >>>>>Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
> >>>>>Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> >>>>>Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>
> >>>>
> >>>>Thanks, I have queued this up for v4.5.
> >>>
> >>>Thanks. May I ask if CPU hotplug is known to work?
> >>
> >>
> >>I didn't test that.
> >
> >As a follow-up I am wondering if you subsequently observed CPU hotplug
> >working. My recent testing on v4.5 indicates that it isn't working in my
> >environment. It would be quite valuable to know if it has ever been known
> >to work.
> >
> >>>Also, which version
> >>>of the boot loader stack is required?
> 
> Yes. CPUHotplug will be supported in boot loader stack released by Dec 2015
> and later.

Thanks, that sounds positive.

As Dec 2015 has already passed I wonder if a boot loader stack that
supports CPU Hotplug is currently available. Perhaps internally?
If so I think it would be good to verify v4.5.

> >>I've the U-Boot / boot loader stack from BSP v3.0.2 on the board. I haven't
> >>tested v3.0.3, yet.
> >
> >For reference my environment is as follows:
> >
> >
> >     NOTICE:  BL2: R-Car H3 Loader Rev.1.0.1
> >     NOTICE:  BL2: DDR1600(rev.0.10)
> >     NOTICE:  BL2: DRAM Split is 4ch
> >     NOTICE:  BL2: QoS is Gfx Oriented(rev.0.24A)
> >     NOTICE:  BL2: v1.1(release):41099f4
> >     NOTICE:  BL2: Built : 11:47:26, Nov 19 2015
> >     NOTICE:  BL2: Normal boot
> >     NOTICE:  BL2: memdrv_block_read dst=0xe630e0b0 src=0x8180000 len=36(0x24)
> >     NOTICE:  BL2: memdrv_block_read dst=0x43f00000 src=0x8180400 len=3072(0xc00)
> >     NOTICE:  BL2: memdrv_block_read dst=0x44000000 src=0x81c0000 len=65536(0x10000)
> >     NOTICE:  BL2: memdrv_block_read dst=0x44100000 src=0x8200000 len=524288(0x80000)
> >     NOTICE:  BL2: memdrv_block_read dst=0x49000000 src=0x8640000 len=1048576(0x100000)
> >
> >     U-Boot 2015.04 (Nov 19 2015 - 11:47:49)
> >
> >     CPU: Renesas Electronics CPU rev 1.0
> >     Board: Salvator-X
> >     DRAM:  896 MiB
> >     MMC:   sh-sdhi: 0, sh-sdhi: 1, sh-sdhi: 2
> >     In:    serial
> >     Out:   serial
> >     Err:   serial
> >     Net:   ravb
> >--
> >To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> >the body of a message to majordomo@vger.kernel.org
> >More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> 
> 
> -- 
> Best regards,
> KHIEM Nguyen
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 5611597..946a5bb 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -35,13 +35,31 @@ 
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		/* 1 core only at this point */
 		a57_0: cpu@0 {
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x0>;
 			device_type = "cpu";
 			enable-method = "psci";
 		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57","arm,armv8";
+			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+		a57_2: cpu@2 {
+			compatible = "arm,cortex-a57","arm,armv8";
+			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+		a57_3: cpu@3 {
+			compatible = "arm,cortex-a57","arm,armv8";
+			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
 	};
 
 	extal_clk: extal {
@@ -101,6 +119,7 @@ 
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -113,7 +132,7 @@ 
 			reg = <0x0 0xf1010000 0 0x1000>,
 			      <0x0 0xf1020000 0 0x2000>;
 			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		gpio0: gpio@e6050000 {
@@ -231,13 +250,13 @@ 
 		timer {
 			compatible = "arm,armv8-timer";
 			interrupts = <GIC_PPI 13
-					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 				     <GIC_PPI 14
-					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 				     <GIC_PPI 11
-					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 				     <GIC_PPI 10
-					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		};
 
 		cpg: clock-controller@e6150000 {