| Message ID | 1450241512-24699-3-git-send-email-horms+renesas@verge.net.au (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
On Wed, Dec 16, 2015 at 01:51:51PM +0900, Simon Horman wrote: > Add fallback compatibility strings for R-Car Gen2 and Gen3. > This is in keeping with the fallback scheme being adopted wherever > appropriate for drivers for Renesas SoCs. > > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> > --- > v4 > * State that one or more compat string should be used > > v3 > * Moved documentation of SoC names to a separate patch > * Use correct fallback compatibility string in example > > v2 > * Add R-Car Gen2 and Gen3 fallback compatibility strings rather than > a single compatibility string for all of R-Car. > --- > Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 12 ++++++++++-- > drivers/usb/renesas_usbhs/common.c | 9 +++++++++ > 2 files changed, 19 insertions(+), 2 deletions(-) Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index a14c0bb561d5..45d9ae13ffa3 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -1,11 +1,19 @@ Renesas Electronics USBHS driver Required properties: - - compatible: Must contain one of the following: + - compatible: Must contain one or more of the following: + - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device + - "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device + - "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first followed + by the generic version. + - reg: Base address and length of the register for the USBHS - interrupts: Interrupt specifier for the USBHS - clocks: A list of phandle + clock specifier pairs @@ -22,7 +30,7 @@ Optional properties: Example: usbhs: usb@e6590000 { - compatible = "renesas,usbhs-r8a7790"; + compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index d82fa36c3465..db9a17bd8997 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -481,6 +481,15 @@ static const struct of_device_id usbhs_of_match[] = { .compatible = "renesas,usbhs-r8a7795", .data = (void *)USBHS_TYPE_RCAR_GEN2, }, + { + .compatible = "renesas,rcar-gen2-usbhs", + .data = (void *)USBHS_TYPE_RCAR_GEN2, + }, + { + /* Gen3 is compatible with Gen2 */ + .compatible = "renesas,rcar-gen3-usbhs", + .data = (void *)USBHS_TYPE_RCAR_GEN2, + }, { }, }; MODULE_DEVICE_TABLE(of, usbhs_of_match);