diff mbox

[v2] adv7604: add direct interrupt handling

Message ID 1450794087-31153-1-git-send-email-ulrich.hecht+renesas@gmail.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Ulrich Hecht Dec. 22, 2015, 2:21 p.m. UTC
When probed from device tree, the i2c client driver can handle the
interrupt on its own.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
This revision implements the suggested style changes and drops the
IRQF_TRIGGER_LOW flag, which is handled in the device tree.

CU
Uli


 drivers/media/i2c/adv7604.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

Comments

Sergei Shtylyov Dec. 22, 2015, 5:44 p.m. UTC | #1
Hello.

On 12/22/2015 05:21 PM, Ulrich Hecht wrote:

> When probed from device tree, the i2c client driver can handle the
> interrupt on its own.
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> This revision implements the suggested style changes and drops the
> IRQF_TRIGGER_LOW flag, which is handled in the device tree.
>
> CU
> Uli
>
>
>   drivers/media/i2c/adv7604.c | 24 ++++++++++++++++++++++--
>   1 file changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
> index 5bd81bd..be5980c 100644
> --- a/drivers/media/i2c/adv7604.c
> +++ b/drivers/media/i2c/adv7604.c
> @@ -31,6 +31,7 @@
>   #include <linux/gpio/consumer.h>
>   #include <linux/hdmi.h>
>   #include <linux/i2c.h>
> +#include <linux/interrupt.h>
>   #include <linux/kernel.h>
>   #include <linux/module.h>
>   #include <linux/slab.h>
> @@ -1971,6 +1972,16 @@ static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
>   	return 0;
>   }
>
> +static irqreturn_t adv76xx_irq_handler(int irq, void *devid)
> +{
> +	struct adv76xx_state *state = devid;
> +	bool handled;
> +
> +	adv76xx_isr(&state->sd, 0, &handled);
> +
> +	return handled ? IRQ_HANDLED : IRQ_NONE;

    Just IRQ_RETVAL(handled), maybe?

[...]

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 5bd81bd..be5980c 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -31,6 +31,7 @@ 
 #include <linux/gpio/consumer.h>
 #include <linux/hdmi.h>
 #include <linux/i2c.h>
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -1971,6 +1972,16 @@  static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
 	return 0;
 }
 
+static irqreturn_t adv76xx_irq_handler(int irq, void *devid)
+{
+	struct adv76xx_state *state = devid;
+	bool handled;
+
+	adv76xx_isr(&state->sd, 0, &handled);
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
 static int adv76xx_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
 {
 	struct adv76xx_state *state = to_state(sd);
@@ -2844,8 +2855,7 @@  static int adv76xx_parse_dt(struct adv76xx_state *state)
 		state->pdata.op_656_range = 1;
 	}
 
-	/* Disable the interrupt for now as no DT-based board uses it. */
-	state->pdata.int1_config = ADV76XX_INT1_CONFIG_DISABLED;
+	state->pdata.int1_config = ADV76XX_INT1_CONFIG_ACTIVE_LOW;
 
 	/* Use the default I2C addresses. */
 	state->pdata.i2c_addresses[ADV7604_PAGE_AVLINK] = 0x42;
@@ -3235,6 +3245,16 @@  static int adv76xx_probe(struct i2c_client *client,
 	v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
 			client->addr << 1, client->adapter->name);
 
+	if (client->irq) {
+		err = devm_request_threaded_irq(&client->dev,
+						client->irq,
+						NULL, adv76xx_irq_handler,
+						IRQF_ONESHOT,
+						dev_name(&client->dev), state);
+		if (err)
+			goto err_entity;
+	}
+
 	err = v4l2_async_register_subdev(sd);
 	if (err)
 		goto err_entity;