From patchwork Sun May 1 05:08:31 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Yoshinori Sato X-Patchwork-Id: 8988021 Return-Path: X-Original-To: patchwork-linux-sh@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 5C669BF29F for ; Sun, 1 May 2016 05:11:37 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 34D98202E5 for ; Sun, 1 May 2016 05:11:35 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id D1391202EB for ; Sun, 1 May 2016 05:11:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752368AbcEAFIx (ORCPT ); Sun, 1 May 2016 01:08:53 -0400 Received: from mail2.asahi-net.or.jp ([202.224.39.198]:55796 "EHLO mail2.asahi-net.or.jp" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751372AbcEAFIn (ORCPT ); Sun, 1 May 2016 01:08:43 -0400 Received: from sa76r4 (y081184.ppp.asahi-net.or.jp [118.243.81.184]) by mail2.asahi-net.or.jp (Postfix) with ESMTP id 53F68FDA2; Sun, 1 May 2016 14:08:41 +0900 (JST) Received: from localhost (localhost [127.0.0.1]) by sa76r4 (Postfix) with ESMTP id 2A9A012462; Sun, 1 May 2016 14:08:41 +0900 (JST) X-Virus-Scanned: Debian amavisd-new at sa76r4.localdomain Received: from sa76r4 ([127.0.0.1]) by localhost (sa76r4.localdomain [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id M-XJV0F6i4Lu; Sun, 1 May 2016 14:08:41 +0900 (JST) Received: by sa76r4 (Postfix, from userid 1000) id CECAB12360; Sun, 1 May 2016 14:08:40 +0900 (JST) From: Yoshinori Sato To: linux-pci@vger.kernel.org, linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Yoshinori Sato Subject: [PATCH RESEND 07/12] pci: sh: SH7751 PCI host bridge driver Date: Sun, 1 May 2016 14:08:31 +0900 Message-Id: <1462079316-27771-8-git-send-email-ysato@users.sourceforge.jp> X-Mailer: git-send-email 2.7.0 In-Reply-To: <1462079316-27771-1-git-send-email-ysato@users.sourceforge.jp> References: <1462079316-27771-1-git-send-email-ysato@users.sourceforge.jp> Sender: linux-sh-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-sh@vger.kernel.org X-Spam-Status: No, score=-7.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Signed-off-by: Yoshinori Sato --- .../devicetree/bindings/pci/sh7751-pci.txt | 51 ++++ drivers/pci/host/Kconfig | 7 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-sh7751.c | 321 +++++++++++++++++++++ drivers/pci/host/pci-sh7751.h | 269 +++++++++++++++++ 5 files changed, 649 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/sh7751-pci.txt create mode 100644 drivers/pci/host/pci-sh7751.c create mode 100644 drivers/pci/host/pci-sh7751.h diff --git a/Documentation/devicetree/bindings/pci/sh7751-pci.txt b/Documentation/devicetree/bindings/pci/sh7751-pci.txt new file mode 100644 index 0000000..45b5152 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/sh7751-pci.txt @@ -0,0 +1,51 @@ +* Renesas SH7751 PCI host interfaces + +Required properties: + - compatible: "renesas,sh7751-pci" is required. + And board specific compatible if fixup required. + + - reg: base address and length of the pcie controller registers. + - #address-cells: set to <2> + - #size-cells: set to <1> + - bus-range: PCI bus numbers covered + - device_type: set to "pci" + - ranges: ranges for the PCI memory and I/O regions. + - interrupt-map-mask and interrupt-map: standard PCI properties + to define the mapping of the PCIe interface to interrupt + numbers. + +Example: + pci: pci-controller@fe200000 { + compatible = "renesas,sh7751-pci", "iodata,landisk"; + device_type = "pci"; + bus-range = <0 0>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x02000000 0x00000000 0xfd000000 0xfd000000 0x00000000 0x01000000>, + <0x01000000 0x00000000 0xfe240000 0x00000000 0x00000000 0x00040000>; + reg = <0xfe200000 0x0400>, + <0x0c000000 0x04000000>, + <0xff800000 0x0030>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x1800 0 7>; + interrupt-map = <0x0000 0 1 &cpldintc evt2irq(0x2a0) 0 + 0x0000 0 2 &cpldintc evt2irq(0x2c0) 0 + 0x0000 0 3 &cpldintc evt2irq(0x2e0) 0 + 0x0000 0 4 &cpldintc evt2irq(0x300) 0 + + 0x0800 0 1 &cpldintc evt2irq(0x2c0) 0 + 0x0800 0 2 &cpldintc evt2irq(0x2e0) 0 + 0x0800 0 3 &cpldintc evt2irq(0x300) 0 + 0x0800 0 4 &cpldintc evt2irq(0x2a0) 0 + + 0x1000 0 1 &cpldintc evt2irq(0x2e0) 0 + 0x1000 0 2 &cpldintc evt2irq(0x300) 0 + 0x1000 0 3 &cpldintc evt2irq(0x2a0) 0 + 0x1000 0 4 &cpldintc evt2irq(0x2c0) 0 + + 0x1800 0 1 &cpldintc evt2irq(0x300) 0 + 0x1800 0 2 &cpldintc evt2irq(0x2a0) 0 + 0x1800 0 3 &cpldintc evt2irq(0x2c0) 0 + 0x1800 0 4 &cpldintc evt2irq(0x2e0) 0>; + }; +}; diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 7a0780d..a8596db 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -231,4 +231,11 @@ config PCI_HOST_THUNDER_ECAM help Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs. +config PCI_SH7751 + bool "Renesas SH7751 On-Chip PCI controller" + depends on OF && SUPERH + select PCI_HOST_COMMON + help + Say Y here if you want PCI support on SH7751. + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index d85b5fa..91268cb 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_PCI_HISI) += pcie-hisi.o obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o +obj-$(CONFIG_PCI_SH7751) += pci-sh7751.o diff --git a/drivers/pci/host/pci-sh7751.c b/drivers/pci/host/pci-sh7751.c new file mode 100644 index 0000000..fd6548b --- /dev/null +++ b/drivers/pci/host/pci-sh7751.c @@ -0,0 +1,321 @@ +/* + * SH7751 PCI driver + * Copyright (C) 2016 Yoshinori Sato + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "pci-host-common.h" +#include "pci-sh7751.h" + +#define pcic_writel(val, reg) __raw_writel(val, pci_reg_base + (reg)) +#define pcic_readl(reg) __raw_readl(pci_reg_base + (reg)) + +unsigned long PCIBIOS_MIN_IO; +unsigned long PCIBIOS_MIN_MEM; +DEFINE_RAW_SPINLOCK(pci_config_lock); + +/* + * PCIC fixups + */ + +static __initconst const struct fixups { + char *compatible; + void (*fixup)(void __iomem *, void __iomem *); +} fixup_list[] = { +}; + +static __init void pcic_fixups(struct device_node *np, + void __iomem *pcic, void __iomem *bcr) +{ + int i; + const struct fixups *f = fixup_list; + + for (i = 0; i < ARRAY_SIZE(fixup_list); i++) { + if (of_device_is_compatible(np, f->compatible)) { + f->fixup(pcic, bcr); + break; + } + } +} + +/* + * Direct access to PCI hardware... + */ +#define CONFIG_CMD(bus, devfn, where) \ + (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) + +/* + * Functions for accessing PCI configuration space with type 1 accesses + */ +static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + struct gen_pci *pci = bus->sysdata; + void __iomem *pci_reg_base = (void __iomem *)pci->cfg.res.start; + unsigned long flags; + u32 data; + + /* + * PCIPDR may only be accessed as 32 bit words, + * so we must do byte alignment by hand + */ + raw_spin_lock_irqsave(&pci_config_lock, flags); + pcic_writel(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pcic_readl(SH4_PCIPDR); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); + + switch (size) { + case 1: + *val = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + *val = (data >> ((where & 2) << 3)) & 0xffff; + break; + case 4: + *val = data; + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* + * Since SH4 only does 32bit access we'll have to do a read, + * mask,write operation. + * We'll allow an odd byte offset, though it should be illegal. + */ +static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + struct gen_pci *pci = bus->sysdata; + void __iomem *pci_reg_base = (void __iomem *)pci->cfg.res.start; + unsigned long flags; + int shift; + u32 data; + + raw_spin_lock_irqsave(&pci_config_lock, flags); + pcic_writel(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pcic_readl(SH4_PCIPDR); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); + + switch (size) { + case 1: + shift = (where & 3) << 3; + data &= ~(0xff << shift); + data |= ((val & 0xff) << shift); + break; + case 2: + shift = (where & 2) << 3; + data &= ~(0xffff << shift); + data |= ((val & 0xffff) << shift); + break; + case 4: + data = val; + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + pcic_writel(data, SH4_PCIPDR); + + return PCIBIOS_SUCCESSFUL; +} + +static struct gen_pci_cfg_bus_ops pci_sh7751_ops = { + .ops = { + .read = sh4_pci_read, + .write = sh4_pci_write, + }, +}; + +/* + * Called after each bus is probed, but before its children + * are examined. + */ +void pcibios_fixup_bus(struct pci_bus *bus) +{ +} + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + */ +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + resource_size_t start = res->start; + + return start; +} + +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + /* + * I/O space can be accessed via normal processor loads and stores on + * this platform but for now we elect not to do this and portable + * drivers should not do this anyway. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + /* + * Ignore write-combine; for now only return uncached mappings. + */ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + +static const struct of_device_id sh7751_pci_of_match[] = { + { .compatible = "renesas,sh7751-pci", }, + { }, +}; +MODULE_DEVICE_TABLE(of, sh7751_pci_of_match); + +static int __init area_sdram_check(void __iomem *pci_reg_base, + void __iomem *bcr, + unsigned int area) +{ + unsigned long word; + + word = __raw_readl(bcr + SH7751_BCR1); + /* check BCR for SDRAM in area */ + if (((word >> area) & 1) == 0) { + printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n", + area, word); + return 0; + } + pcic_writel(word, SH4_PCIBCR1); + + word = __raw_readw(bcr + SH7751_BCR2); + /* check BCR2 for 32bit SDRAM interface*/ + if (((word >> (area << 1)) & 0x3) != 0x3) { + printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n", + area, word); + return 0; + } + pcic_writel(word, SH4_PCIBCR2); + + return 1; +} + +static __init int sh7751_pci_probe(struct platform_device *pdev) +{ + struct resource *res, *wres; + u32 id; + u32 reg, word; + void __iomem *pci_reg_base; + void __iomem *bcr; + struct gen_pci *pci; + + pci = devm_kzalloc(&pdev->dev, sizeof(*pci), GFP_KERNEL); + if (!pci) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pci_reg_base = (void __iomem *)res->start; + if (IS_ERR(pci_reg_base)) + return PTR_ERR(pci_reg_base); + + wres = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (IS_ERR(wres)) + return PTR_ERR(wres); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + bcr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pci_reg_base)) + return PTR_ERR(bcr); + + /* check for SH7751/SH7751R hardware */ + id = pcic_readl(SH7751_PCICONF0); + if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && + id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { + pr_warn("PCI: This is not an SH7751(R)\n"); + return -ENODEV; + } + dev_info(&pdev->dev, "PCI core found at %p\n", + pci_reg_base); + + /* Set the BCR's to enable PCI access */ + reg = __raw_readl(bcr); + reg |= 0x80000; + __raw_writel(reg, bcr); + + /* Turn the clocks back on (not done in reset)*/ + pcic_writel(0, SH4_PCICLKR); + /* Clear Powerdown IRQ's (not done in reset) */ + word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0; + pcic_writel(word, SH4_PCIPINT); + + /* set the command/status bits to: + * Wait Cycle Control + Parity Enable + Bus Master + + * Mem space enable + */ + word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER | + SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES; + pcic_writel(word, SH7751_PCICONF1); + + /* define this host as the host bridge */ + word = PCI_BASE_CLASS_BRIDGE << 24; + pcic_writel(word, SH7751_PCICONF2); + + /* Set IO and Mem windows to local address + * Make PCI and local address the same for easy 1 to 1 mapping + */ + word = wres->end - wres->start - 1; + pcic_writel(word, SH4_PCILSR0); + /* Set the values on window 0 PCI config registers */ + word = P2SEGADDR(wres->start); + pcic_writel(word, SH4_PCILAR0); + pcic_writel(word, SH7751_PCICONF5); + + /* check BCR for SDRAM in specified area */ + area_sdram_check(pci_reg_base, bcr, (wres->start >> 27) & 0x07); + + /* configure the wait control registers */ + word = __raw_readl(bcr + SH7751_WCR1); + pcic_writel(word, SH4_PCIWCR1); + word = __raw_readl(bcr + SH7751_WCR2); + pcic_writel(word, SH4_PCIWCR2); + word = __raw_readl(bcr + SH7751_WCR3); + pcic_writel(word, SH4_PCIWCR3); + word = __raw_readl(bcr + SH7751_MCR); + pcic_writel(word, SH4_PCIMCR); + + pcic_fixups(pdev->dev.of_node, pci_reg_base, bcr); + + /* SH7751 init done, set central function init complete */ + /* use round robin mode to stop a device starving/overruning */ + word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; + pcic_writel(word, SH4_PCICR); + + pci->cfg.ops = &pci_sh7751_ops; + return pci_host_common_probe(pdev, pci); +} + +static __refdata struct platform_driver sh7751_pci_driver = { + .driver = { + .name = "sh7751-pci", + .of_match_table = sh7751_pci_of_match, + }, + .probe = sh7751_pci_probe, +}; +module_platform_driver(sh7751_pci_driver); + +MODULE_DESCRIPTION("SH7751 PCI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pci/host/pci-sh7751.h b/drivers/pci/host/pci-sh7751.h new file mode 100644 index 0000000..4f8230e --- /dev/null +++ b/drivers/pci/host/pci-sh7751.h @@ -0,0 +1,269 @@ +/* + * Low-Level PCI Support for SH7751 targets + * + * Dustin McIntire (dustin@sensoria.com) (c) 2001 + * Paul Mundt (lethal@linux-sh.org) (c) 2003 + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + */ + +#ifndef _PCI_SH7751_H_ +#define _PCI_SH7751_H_ + +#define SH4_PCICR 0x100 /* PCI Control Register */ + #define SH4_PCICR_PREFIX 0xA5000000 /* CR prefix for write */ + #define SH4_PCICR_FTO 0x00000400 /* TRDY/IRDY Enable */ + #define SH4_PCICR_TRSB 0x00000200 /* Target Read Single */ + #define SH4_PCICR_BSWP 0x00000100 /* Target Byte Swap */ + #define SH4_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */ + #define SH4_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */ + #define SH4_PCICR_MD 0x00000030 /* MD9 and MD10 status */ + #define SH4_PCICR_SERR 0x00000008 /* SERR output assert */ + #define SH4_PCICR_INTA 0x00000004 /* INTA output assert */ + #define SH4_PCICR_PRST 0x00000002 /* PCI Reset Assert */ + #define SH4_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */ +#define SH4_PCILSR0 0x104 /* PCI Local Space Register0 */ +#define SH4_PCILSR1 0x108 /* PCI Local Space Register1 */ +#define SH4_PCILAR0 0x10C /* PCI Local Addr Register1 */ +#define SH4_PCILAR1 0x110 /* PCI Local Addr Register1 */ +#define SH4_PCIINT 0x114 /* PCI Interrupt Register */ + #define SH4_PCIINT_MLCK 0x00008000 /* Master Lock Error */ + #define SH4_PCIINT_TABT 0x00004000 /* Target Abort Error */ + #define SH4_PCIINT_TRET 0x00000200 /* Target Retry Error */ + #define SH4_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */ + #define SH4_PCIINT_PRTY 0x00000080 /* Address Parity Error */ + #define SH4_PCIINT_SERR 0x00000040 /* SERR Detection Error */ + #define SH4_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */ + #define SH4_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Err Det. */ + #define SH4_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */ + #define SH4_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */ + #define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */ + #define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */ +#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */ + #define SH4_PCIINTM_TTADIM BIT(14) /* Target-target abort interrupt */ + #define SH4_PCIINTM_TMTOIM BIT(9) /* Target retry timeout */ + #define SH4_PCIINTM_MDEIM BIT(8) /* Master function disable error */ + #define SH4_PCIINTM_APEDIM BIT(7) /* Address parity error detection */ + #define SH4_PCIINTM_SDIM BIT(6) /* SERR detection */ + #define SH4_PCIINTM_DPEITWM BIT(5) /* Data parity error for target write */ + #define SH4_PCIINTM_PEDITRM BIT(4) /* PERR detection for target read */ + #define SH4_PCIINTM_TADIMM BIT(3) /* Target abort for master */ + #define SH4_PCIINTM_MADIMM BIT(2) /* Master abort for master */ + #define SH4_PCIINTM_MWPDIM BIT(1) /* Master write data parity error */ + #define SH4_PCIINTM_MRDPEIM BIT(0) /* Master read data parity error */ +#define SH4_PCIALR 0x11C /* Error Address Register */ +#define SH4_PCICLR 0x120 /* Error Command/Data */ + #define SH4_PCICLR_MPIO 0x80000000 + #define SH4_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */ + #define SH4_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */ + #define SH4_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */ + #define SH4_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */ + #define SH4_PCICLR_TGT 0x04000000 /* Target Transfer Error */ + #define SH4_PCICLR_CMDL 0x0000000F /* PCI Command at Error */ +#define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */ + #define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */ + #define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */ + #define SH4_PCIAINT_MBTO 0x00000800 /* Master Bus Time Out */ + #define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */ + #define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */ + #define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */ + #define SH4_PCIAINT_WDPE 0x00000001 /* Write Data Parity Error */ +#define SH4_PCIAINTM 0x134 /* Arbiter Int. Mask Register */ +#define SH4_PCIBMLR 0x138 /* Error Bus Master Register */ + #define SH4_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */ + #define SH4_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */ + #define SH4_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */ + #define SH4_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */ + #define SH4_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */ +#define SH4_PCIDMABT 0x140 /* DMA Transfer Arb. Register */ + #define SH4_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */ +#define SH4_PCIDPA0 0x180 /* DMA0 Transfer Addr. */ +#define SH4_PCIDLA0 0x184 /* DMA0 Local Addr. */ +#define SH4_PCIDTC0 0x188 /* DMA0 Transfer Cnt. */ +#define SH4_PCIDCR0 0x18C /* DMA0 Control Register */ + #define SH4_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */ + #define SH4_PCIDCR_MAST 0x00000100 /* DMA Termination Type */ + #define SH4_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/ + #define SH4_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */ + #define SH4_PCIDCR_LHLD 0x00000020 /* Local Address Control */ + #define SH4_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/ + #define SH4_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */ + #define SH4_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */ + #define SH4_PCIDCR_STOP 0x00000002 /* Force DMA Stop */ + #define SH4_PCIDCR_STRT 0x00000001 /* DMA Start */ +#define SH4_PCIDPA1 0x190 /* DMA1 Transfer Addr. */ +#define SH4_PCIDLA1 0x194 /* DMA1 Local Addr. */ +#define SH4_PCIDTC1 0x198 /* DMA1 Transfer Cnt. */ +#define SH4_PCIDCR1 0x19C /* DMA1 Control Register */ +#define SH4_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. */ +#define SH4_PCIDLA2 0x1A4 /* DMA2 Local Addr. */ +#define SH4_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. */ +#define SH4_PCIDCR2 0x1AC /* DMA2 Control Register */ +#define SH4_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. */ +#define SH4_PCIDLA3 0x1B4 /* DMA3 Local Addr. */ +#define SH4_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. */ +#define SH4_PCIDCR3 0x1BC /* DMA3 Control Register */ +#define SH4_PCIPAR 0x1C0 /* PIO Address Register */ + #define SH4_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */ + #define SH4_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */ + #define SH4_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */ + #define SH4_PCIPAR_REGAD 0x000000FC /* Register Address Number */ +#define SH4_PCIMBR 0x1C4 /* Memory Base Address */ + #define SH4_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */ + #define SH4_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */ +#define SH4_PCIIOBR 0x1C8 /* I/O Base Address Register */ + #define SH4_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */ + #define SH4_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */ +#define SH4_PCIPINT 0x1CC /* Power Mgmnt Int. Register */ + #define SH4_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */ + #define SH4_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */ +#define SH4_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */ +#define SH4_PCICLKR 0x1D4 /* Clock Ctrl. Register */ + #define SH4_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */ + #define SH4_PCICLKR_BCSTP 0x00000001 /* BCLK Clock Stop */ +/* For definitions of BCR, MCR see ... */ +#define SH4_PCIBCR1 0x1E0 /* Memory BCR1 Register */ + #define SH4_PCIMBR0 SH4_PCIBCR1 +#define SH4_PCIBCR2 0x1E4 /* Memory BCR2 Register */ + #define SH4_PCIMBMR0 SH4_PCIBCR2 +#define SH4_PCIWCR1 0x1E8 /* Wait Control 1 Register */ +#define SH4_PCIWCR2 0x1EC /* Wait Control 2 Register */ +#define SH4_PCIWCR3 0x1F0 /* Wait Control 3 Register */ + #define SH4_PCIMBR2 SH4_PCIWCR3 +#define SH4_PCIMCR 0x1F4 /* Memory Control Register */ +#define SH4_PCIBCR3 0x1f8 /* Memory BCR3 Register */ +#define SH4_PCIPCTR 0x200 /* Port Control Register */ + #define SH4_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */ + #define SH4_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */ + #define SH4_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */ + #define SH4_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */ + #define SH4_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */ + #define SH4_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */ + #define SH4_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */ + #define SH4_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */ + #define SH4_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */ +#define SH4_PCIPDTR 0x204 /* Port Data Register */ + #define SH4_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */ + #define SH4_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */ + #define SH4_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */ + #define SH4_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */ + #define SH4_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */ + #define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */ +#define SH4_PCIPDR 0x220 /* Port IO Data Register */ + +/* Platform Specific Values */ +#define SH7751_VENDOR_ID 0x1054 +#define SH7751_DEVICE_ID 0x3505 +#define SH7751R_DEVICE_ID 0x350e + +/* SH7751 Specific Values */ +#define SH7751_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */ +#define SH7751_PCI_CONFIG_SIZE 0x1000000 /* Config space size */ +#define SH7751_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */ +#define SH7751_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ +#define SH7751_PCI_IO_BASE 0xFE240000 /* IO space base address */ +#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */ + +#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */ + +#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */ + #define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */ + #define SH7751_PCICONF0_VNDID 0x0000FFFF /* Vendor ID */ +#define SH7751_PCICONF1 0x4 /* PCI Config Reg 1 */ + #define SH7751_PCICONF1_DPE 0x80000000 /* Data Parity Error */ + #define SH7751_PCICONF1_SSE 0x40000000 /* System Error Status */ + #define SH7751_PCICONF1_RMA 0x20000000 /* Master Abort */ + #define SH7751_PCICONF1_RTA 0x10000000 /* Target Abort Rx Status */ + #define SH7751_PCICONF1_STA 0x08000000 /* Target Abort Exec Status */ + #define SH7751_PCICONF1_DEV 0x06000000 /* Timing Status */ + #define SH7751_PCICONF1_DPD 0x01000000 /* Data Parity Status */ + #define SH7751_PCICONF1_FBBC 0x00800000 /* Back 2 Back Status */ + #define SH7751_PCICONF1_UDF 0x00400000 /* User Defined Status */ + #define SH7751_PCICONF1_66M 0x00200000 /* 66Mhz Operation Status */ + #define SH7751_PCICONF1_PM 0x00100000 /* Power Management Status */ + #define SH7751_PCICONF1_PBBE 0x00000200 /* Back 2 Back Control */ + #define SH7751_PCICONF1_SER 0x00000100 /* SERR Output Control */ + #define SH7751_PCICONF1_WCC 0x00000080 /* Wait Cycle Control */ + #define SH7751_PCICONF1_PER 0x00000040 /* Parity Error Response */ + #define SH7751_PCICONF1_VPS 0x00000020 /* VGA Pallet Snoop */ + #define SH7751_PCICONF1_MWIE 0x00000010 /* Memory Write+Invalidate */ + #define SH7751_PCICONF1_SPC 0x00000008 /* Special Cycle Control */ + #define SH7751_PCICONF1_BUM 0x00000004 /* Bus Master Control */ + #define SH7751_PCICONF1_MES 0x00000002 /* Memory Space Control */ + #define SH7751_PCICONF1_IOS 0x00000001 /* I/O Space Control */ +#define SH7751_PCICONF2 0x8 /* PCI Config Reg 2 */ + #define SH7751_PCICONF2_BCC 0xFF000000 /* Base Class Code */ + #define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */ + #define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */ + #define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */ +#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */ + #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */ + #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */ + #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */ + #define SH7751_PCICONF3_HD7 0x00800000 /* Single Function device */ + #define SH7751_PCICONF3_HD6_0 0x007F0000 /* Configuration Layout */ + #define SH7751_PCICONF3_LAT 0x0000FF00 /* Latency Timer */ + #define SH7751_PCICONF3_CLS 0x000000FF /* Cache Line Size */ +#define SH7751_PCICONF4 0x10 /* PCI Config Reg 4 */ + #define SH7751_PCICONF4_BASE 0xFFFFFFFC /* I/O Space Base Addr */ + #define SH7751_PCICONF4_ASI 0x00000001 /* Address Space Type */ +#define SH7751_PCICONF5 0x14 /* PCI Config Reg 5 */ + #define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */ + #define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */ + #define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */ + #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */ +#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */ + #define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */ + #define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */ + #define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */ + #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */ +/* PCICONF7 - PCICONF10 are undefined */ +#define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */ + #define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */ + #define SH7751_PCICONF11_SVID 0x0000FFFF /* Subsystem Vendor ID */ +/* PCICONF12 is undefined */ +#define SH7751_PCICONF13 0x34 /* PCI Config Reg 13 */ + #define SH7751_PCICONF13_CPTR 0x000000FF /* PM function pointer */ +/* PCICONF14 is undefined */ +#define SH7751_PCICONF15 0x3C /* PCI Config Reg 15 */ + #define SH7751_PCICONF15_IPIN 0x000000FF /* Interrupt Pin */ +#define SH7751_PCICONF16 0x40 /* PCI Config Reg 16 */ + #define SH7751_PCICONF16_PMES 0xF8000000 /* PME Support */ + #define SH7751_PCICONF16_D2S 0x04000000 /* D2 Support */ + #define SH7751_PCICONF16_D1S 0x02000000 /* D1 Support */ + #define SH7751_PCICONF16_DSI 0x00200000 /* Bit Device Init. */ + #define SH7751_PCICONF16_PMCK 0x00080000 /* Clock for PME req. */ + #define SH7751_PCICONF16_VER 0x00070000 /* PM Version */ + #define SH7751_PCICONF16_NIP 0x0000FF00 /* Next Item Pointer */ + #define SH7751_PCICONF16_CID 0x000000FF /* Capability Identifier */ +#define SH7751_PCICONF17 0x44 /* PCI Config Reg 17 */ + #define SH7751_PCICONF17_DATA 0xFF000000 /* Data field for PM */ + #define SH7751_PCICONF17_PMES 0x00800000 /* PME Status */ + #define SH7751_PCICONF17_DSCL 0x00600000 /* Data Scaling Value */ + #define SH7751_PCICONF17_DSEL 0x001E0000 /* Data Select */ + #define SH7751_PCICONF17_PMEN 0x00010000 /* PME Enable */ + #define SH7751_PCICONF17_PWST 0x00000003 /* Power State */ +/* SH7751 Internal PCI Registers */ + +/* Memory Control Registers */ +#define SH7751_BCR1 0x0000 /* Memory BCR1 Register */ +#define SH7751_BCR2 0x0004 /* Memory BCR2 Register */ +#define SH7751_BCR3 0x0050 /* Memory BCR3 Register */ +#define SH7751_WCR1 0x0008 /* Wait Control 1 Register */ +#define SH7751_WCR2 0x000C /* Wait Control 2 Register */ +#define SH7751_WCR3 0x0010 /* Wait Control 3 Register */ +#define SH7751_MCR 0x0014 /* Memory Control Register */ + +/* General Memory Config Addresses */ +#define SH7751_CS0_BASE_ADDR 0x0 +#define SH7751_MEM_REGION_SIZE 0x04000000 +#define SH7751_CS1_BASE_ADDR (SH7751_CS0_BASE_ADDR + SH7751_MEM_REGION_SIZE) +#define SH7751_CS2_BASE_ADDR (SH7751_CS1_BASE_ADDR + SH7751_MEM_REGION_SIZE) +#define SH7751_CS3_BASE_ADDR (SH7751_CS2_BASE_ADDR + SH7751_MEM_REGION_SIZE) +#define SH7751_CS4_BASE_ADDR (SH7751_CS3_BASE_ADDR + SH7751_MEM_REGION_SIZE) +#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE) +#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE) + +#endif /* _PCI_SH7751_H_ */