| Message ID | 1512650.VUqGxiAB2A@wasted.cogentembedded.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
Hi Sergei, On Wed, Dec 2, 2015 at 9:11 PM, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> wrote: > Add the EtherAVB pin groups to the R8A7791 PFC driver. Thanks for your patch! > +static const unsigned int avb_mii_pins[] = { > + RCAR_GP_PIN(5, 18), RCAR_GP_PIN(5, 19), RCAR_GP_PIN(5, 20), > + RCAR_GP_PIN(5, 21), > + > + RCAR_GP_PIN(5, 0), RCAR_GP_PIN(5, 1), RCAR_GP_PIN(5, 2), > + RCAR_GP_PIN(5, 3), > + > + RCAR_GP_PIN(5, 8), RCAR_GP_PIN(5, 13), RCAR_GP_PIN(5, 10), > + RCAR_GP_PIN(5, 15), RCAR_GP_PIN(5, 26), RCAR_GP_PIN(5, 28), > + RCAR_GP_PIN(5, 29), > +}; > +static const unsigned int avb_mii_mux[] = { > + AVB_TXD0_MARK, AVB_TXD1_MARK, AVB_TXD2_MARK, > + AVB_TXD3_MARK, > + > + AVB_RXD0_MARK, AVB_RXD1_MARK, AVB_RXD2_MARK, > + AVB_RXD3_MARK, > + > + AVB_RX_ER_MARK, AVB_RX_CLK_MARK, AVB_RX_DV_MARK, > + AVB_CRS_MARK, AVB_TX_EN_MARK, AVB_TX_CLK_MARK, > + AVB_COL_MARK, > +}; The MII pin list include RX_ER, but not TX_ER... > +static const unsigned int avb_gmii_pins[] = { > + RCAR_GP_PIN(5, 18), RCAR_GP_PIN(5, 19), RCAR_GP_PIN(5, 20), > + RCAR_GP_PIN(5, 21), RCAR_GP_PIN(5, 22), RCAR_GP_PIN(5, 23), > + RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 25), > + > + RCAR_GP_PIN(5, 0), RCAR_GP_PIN(5, 1), RCAR_GP_PIN(5, 2), > + RCAR_GP_PIN(5, 3), RCAR_GP_PIN(5, 4), RCAR_GP_PIN(5, 5), > + RCAR_GP_PIN(5, 6), RCAR_GP_PIN(5, 7), > + > + RCAR_GP_PIN(5, 8), RCAR_GP_PIN(5, 13), RCAR_GP_PIN(5, 10), > + RCAR_GP_PIN(5, 15), RCAR_GP_PIN(5, 30), RCAR_GP_PIN(5, 17), > + RCAR_GP_PIN(5, 26), RCAR_GP_PIN(5, 27), RCAR_GP_PIN(5, 28), > + RCAR_GP_PIN(5, 29), > +}; > +static const unsigned int avb_gmii_mux[] = { > + AVB_TXD0_MARK, AVB_TXD1_MARK, AVB_TXD2_MARK, > + AVB_TXD3_MARK, AVB_TXD4_MARK, AVB_TXD5_MARK, > + AVB_TXD6_MARK, AVB_TXD7_MARK, > + > + AVB_RXD0_MARK, AVB_RXD1_MARK, AVB_RXD2_MARK, > + AVB_RXD3_MARK, AVB_RXD4_MARK, AVB_RXD5_MARK, > + AVB_RXD6_MARK, AVB_RXD7_MARK, > + > + AVB_RX_ER_MARK, AVB_RX_CLK_MARK, AVB_RX_DV_MARK, > + AVB_CRS_MARK, AVB_GTX_CLK_MARK, AVB_GTXREFCLK_MARK, > + AVB_TX_EN_MARK, AVB_TX_ER_MARK, AVB_TX_CLK_MARK, > + AVB_COL_MARK, > +}; ... while the GMII pin list includes both RX_ER and TX_ER. Is that correct? Should it be the other way around? Section "45A.3.13.1 MII Frame Transmission/Reception Timing" of the R-Car Gen2 datasheet shows timing diagrams for both AVB_TX_ER and AVB_RX_ER, so I'd expect both pins to be needed for MII. Unfortunately Section "45A.3.13.2 GMII Frame Reception Timing" shows timing diagrams for receive only (thus involving AVB_RX_ER only), so I'm not sure the AVB_TX_ER pin is actually needed for GMII. I don't have schematics for any R-Car Gen2 board that has AVB support, so I can't check myself how the MII/GMII is really wired. Note that this also applies to the existing AVB pinmux data in pfc-r8a7790.c. Can you please check/clarify? I'm not an Ethernet PHY expert. Thanks again! Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello. On 12/8/2015 3:12 PM, Geert Uytterhoeven wrote: >> Add the EtherAVB pin groups to the R8A7791 PFC driver. > > Thanks for your patch! > >> +static const unsigned int avb_mii_pins[] = { >> + RCAR_GP_PIN(5, 18), RCAR_GP_PIN(5, 19), RCAR_GP_PIN(5, 20), >> + RCAR_GP_PIN(5, 21), >> + >> + RCAR_GP_PIN(5, 0), RCAR_GP_PIN(5, 1), RCAR_GP_PIN(5, 2), >> + RCAR_GP_PIN(5, 3), >> + >> + RCAR_GP_PIN(5, 8), RCAR_GP_PIN(5, 13), RCAR_GP_PIN(5, 10), >> + RCAR_GP_PIN(5, 15), RCAR_GP_PIN(5, 26), RCAR_GP_PIN(5, 28), >> + RCAR_GP_PIN(5, 29), >> +}; >> +static const unsigned int avb_mii_mux[] = { >> + AVB_TXD0_MARK, AVB_TXD1_MARK, AVB_TXD2_MARK, >> + AVB_TXD3_MARK, >> + >> + AVB_RXD0_MARK, AVB_RXD1_MARK, AVB_RXD2_MARK, >> + AVB_RXD3_MARK, >> + >> + AVB_RX_ER_MARK, AVB_RX_CLK_MARK, AVB_RX_DV_MARK, >> + AVB_CRS_MARK, AVB_TX_EN_MARK, AVB_TX_CLK_MARK, >> + AVB_COL_MARK, >> +}; > > The MII pin list include RX_ER, but not TX_ER... Wikipedia tells me TX_ER is optional for MII. > ... while the GMII pin list includes both RX_ER and TX_ER. Is that correct? > Should it be the other way around? > > Section "45A.3.13.1 MII Frame Transmission/Reception Timing" of the R-Car Gen2 > datasheet shows timing diagrams for both AVB_TX_ER and AVB_RX_ER, so I'd expect > both pins to be needed for MII. Hm, interesting... > Unfortunately Section "45A.3.13.2 GMII Frame Reception Timing" shows timing > diagrams for receive only (thus involving AVB_RX_ER only), so I'm not sure the > AVB_TX_ER pin is actually needed for GMII. It is. > I don't have schematics for any R-Car Gen2 board that has AVB support, so I > can't check myself how the MII/GMII is really wired. The standard Lager/Porter boards require some modification to use an an AVB daughter board, AFAIK. > Note that this also applies to the existing AVB pinmux data in pfc-r8a7790.c. And we haven't really tested MII, only GMII. [...] > Gr{oetje,eeting}s, > > Geert MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sergei, On Tue, Dec 8, 2015 at 1:30 PM, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> wrote: > On 12/8/2015 3:12 PM, Geert Uytterhoeven wrote: >>> Add the EtherAVB pin groups to the R8A7791 PFC driver. >> >> Thanks for your patch! >> >>> +static const unsigned int avb_mii_pins[] = { >>> + RCAR_GP_PIN(5, 18), RCAR_GP_PIN(5, 19), RCAR_GP_PIN(5, 20), >>> + RCAR_GP_PIN(5, 21), >>> + >>> + RCAR_GP_PIN(5, 0), RCAR_GP_PIN(5, 1), RCAR_GP_PIN(5, 2), >>> + RCAR_GP_PIN(5, 3), >>> + >>> + RCAR_GP_PIN(5, 8), RCAR_GP_PIN(5, 13), RCAR_GP_PIN(5, 10), >>> + RCAR_GP_PIN(5, 15), RCAR_GP_PIN(5, 26), RCAR_GP_PIN(5, 28), >>> + RCAR_GP_PIN(5, 29), >>> +}; >>> +static const unsigned int avb_mii_mux[] = { >>> + AVB_TXD0_MARK, AVB_TXD1_MARK, AVB_TXD2_MARK, >>> + AVB_TXD3_MARK, >>> + >>> + AVB_RXD0_MARK, AVB_RXD1_MARK, AVB_RXD2_MARK, >>> + AVB_RXD3_MARK, >>> + >>> + AVB_RX_ER_MARK, AVB_RX_CLK_MARK, AVB_RX_DV_MARK, >>> + AVB_CRS_MARK, AVB_TX_EN_MARK, AVB_TX_CLK_MARK, >>> + AVB_COL_MARK, >>> +}; >> >> The MII pin list include RX_ER, but not TX_ER... > > Wikipedia tells me TX_ER is optional for MII. OK. So it may make sense to have a separate pinmux group for it. BTW, I've just noticed the R-Car Gen2 sh_eth Ethernet (which does 10/100 only) doesn't have the pin. >> ... while the GMII pin list includes both RX_ER and TX_ER. Is that >> correct? >> Should it be the other way around? >> >> Section "45A.3.13.1 MII Frame Transmission/Reception Timing" of the R-Car >> Gen2 >> datasheet shows timing diagrams for both AVB_TX_ER and AVB_RX_ER, so I'd >> expect >> both pins to be needed for MII. > > > Hm, interesting... > >> Unfortunately Section "45A.3.13.2 GMII Frame Reception Timing" shows >> timing >> diagrams for receive only (thus involving AVB_RX_ER only), so I'm not sure >> the >> AVB_TX_ER pin is actually needed for GMII. > > It is. OK. >> I don't have schematics for any R-Car Gen2 board that has AVB support, so >> I >> can't check myself how the MII/GMII is really wired. > > The standard Lager/Porter boards require some modification to use an an > AVB daughter board, AFAIK. Do you have schematics for those? >> Note that this also applies to the existing AVB pinmux data in >> pfc-r8a7790.c. > > And we haven't really tested MII, only GMII. So I guess the daughterboard uses both RX_ER and TX_ER? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/08/2015 04:06 PM, Geert Uytterhoeven wrote: >>>> Add the EtherAVB pin groups to the R8A7791 PFC driver. >>> >>> Thanks for your patch! >>> >>>> +static const unsigned int avb_mii_pins[] = { >>>> + RCAR_GP_PIN(5, 18), RCAR_GP_PIN(5, 19), RCAR_GP_PIN(5, 20), >>>> + RCAR_GP_PIN(5, 21), >>>> + >>>> + RCAR_GP_PIN(5, 0), RCAR_GP_PIN(5, 1), RCAR_GP_PIN(5, 2), >>>> + RCAR_GP_PIN(5, 3), >>>> + >>>> + RCAR_GP_PIN(5, 8), RCAR_GP_PIN(5, 13), RCAR_GP_PIN(5, 10), >>>> + RCAR_GP_PIN(5, 15), RCAR_GP_PIN(5, 26), RCAR_GP_PIN(5, 28), >>>> + RCAR_GP_PIN(5, 29), >>>> +}; >>>> +static const unsigned int avb_mii_mux[] = { >>>> + AVB_TXD0_MARK, AVB_TXD1_MARK, AVB_TXD2_MARK, >>>> + AVB_TXD3_MARK, >>>> + >>>> + AVB_RXD0_MARK, AVB_RXD1_MARK, AVB_RXD2_MARK, >>>> + AVB_RXD3_MARK, >>>> + >>>> + AVB_RX_ER_MARK, AVB_RX_CLK_MARK, AVB_RX_DV_MARK, >>>> + AVB_CRS_MARK, AVB_TX_EN_MARK, AVB_TX_CLK_MARK, >>>> + AVB_COL_MARK, >>>> +}; >>> >>> The MII pin list include RX_ER, but not TX_ER... >> >> Wikipedia tells me TX_ER is optional for MII. > > OK. So it may make sense to have a separate pinmux group for it. Hm... since this is MAC-to-PHY signal, I'd prefer just adding it to the MII group... but you may have a point here. > BTW, I've just noticed the R-Car Gen2 sh_eth Ethernet (which does 10/100 only) > doesn't have the pin. Th EtherMAC only support RMII which doesn't have this signal at all. >>> ... while the GMII pin list includes both RX_ER and TX_ER. Is that >>> correct? >>> Should it be the other way around? >>> >>> Section "45A.3.13.1 MII Frame Transmission/Reception Timing" of the R-Car >>> Gen2 >>> datasheet shows timing diagrams for both AVB_TX_ER and AVB_RX_ER, so I'd >>> expect >>> both pins to be needed for MII. >> Hm, interesting... >>> I don't have schematics for any R-Car Gen2 board that has AVB support, so >>> I >>> can't check myself how the MII/GMII is really wired. >> >> The standard Lager/Porter boards require some modification to use an an >> AVB daughter board, AFAIK. > > Do you have schematics for those? Daughterboards, you mean? Yes. There are 2 of them, one with Gigabit PHY, the other with 100 Mbit one (I don't have that one and haven't tested it). >>> Note that this also applies to the existing AVB pinmux data in >>> pfc-r8a7790.c. >> >> And we haven't really tested MII, only GMII. > > So I guess the daughterboard uses both RX_ER and TX_ER? Yes, for the one with Gigabit PHY and no, for the one with 100 Mbit (that one doesn't even seem to have RX_ER connected to anything). > Gr{oetje,eeting}s, > > Geert MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Dec 8, 2015 at 2:41 PM, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> wrote: >> So I guess the daughterboard uses both RX_ER and TX_ER? > > Yes, for the one with Gigabit PHY and no, for the one with 100 Mbit (that > one doesn't even seem to have RX_ER connected to anything). Which means the pin could be used for something else, modulo the fact that it's part of the avb_mii group, and thus configured for avb... Thanks for checking! Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Index: linux-pinctrl/drivers/pinctrl/sh-pfc/pfc-r8a7791.c =================================================================== --- linux-pinctrl.orig/drivers/pinctrl/sh-pfc/pfc-r8a7791.c +++ linux-pinctrl/drivers/pinctrl/sh-pfc/pfc-r8a7791.c @@ -1740,6 +1740,82 @@ static const unsigned int audio_clkout_m AUDIO_CLKOUT_MARK, }; +/* - AVB -------------------------------------------------------------------- */ +static const unsigned int avb_link_pins[] = { + RCAR_GP_PIN(5, 14), +}; +static const unsigned int avb_link_mux[] = { + AVB_LINK_MARK, +}; +static const unsigned int avb_magic_pins[] = { + RCAR_GP_PIN(5, 11), +}; +static const unsigned int avb_magic_mux[] = { + AVB_MAGIC_MARK, +}; +static const unsigned int avb_phy_int_pins[] = { + RCAR_GP_PIN(5, 16), +}; +static const unsigned int avb_phy_int_mux[] = { + AVB_PHY_INT_MARK, +}; +static const unsigned int avb_mdio_pins[] = { + RCAR_GP_PIN(5, 12), RCAR_GP_PIN(5, 9), +}; +static const unsigned int avb_mdio_mux[] = { + AVB_MDC_MARK, AVB_MDIO_MARK, +}; +static const unsigned int avb_mii_pins[] = { + RCAR_GP_PIN(5, 18), RCAR_GP_PIN(5, 19), RCAR_GP_PIN(5, 20), + RCAR_GP_PIN(5, 21), + + RCAR_GP_PIN(5, 0), RCAR_GP_PIN(5, 1), RCAR_GP_PIN(5, 2), + RCAR_GP_PIN(5, 3), + + RCAR_GP_PIN(5, 8), RCAR_GP_PIN(5, 13), RCAR_GP_PIN(5, 10), + RCAR_GP_PIN(5, 15), RCAR_GP_PIN(5, 26), RCAR_GP_PIN(5, 28), + RCAR_GP_PIN(5, 29), +}; +static const unsigned int avb_mii_mux[] = { + AVB_TXD0_MARK, AVB_TXD1_MARK, AVB_TXD2_MARK, + AVB_TXD3_MARK, + + AVB_RXD0_MARK, AVB_RXD1_MARK, AVB_RXD2_MARK, + AVB_RXD3_MARK, + + AVB_RX_ER_MARK, AVB_RX_CLK_MARK, AVB_RX_DV_MARK, + AVB_CRS_MARK, AVB_TX_EN_MARK, AVB_TX_CLK_MARK, + AVB_COL_MARK, +}; +static const unsigned int avb_gmii_pins[] = { + RCAR_GP_PIN(5, 18), RCAR_GP_PIN(5, 19), RCAR_GP_PIN(5, 20), + RCAR_GP_PIN(5, 21), RCAR_GP_PIN(5, 22), RCAR_GP_PIN(5, 23), + RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 25), + + RCAR_GP_PIN(5, 0), RCAR_GP_PIN(5, 1), RCAR_GP_PIN(5, 2), + RCAR_GP_PIN(5, 3), RCAR_GP_PIN(5, 4), RCAR_GP_PIN(5, 5), + RCAR_GP_PIN(5, 6), RCAR_GP_PIN(5, 7), + + RCAR_GP_PIN(5, 8), RCAR_GP_PIN(5, 13), RCAR_GP_PIN(5, 10), + RCAR_GP_PIN(5, 15), RCAR_GP_PIN(5, 30), RCAR_GP_PIN(5, 17), + RCAR_GP_PIN(5, 26), RCAR_GP_PIN(5, 27), RCAR_GP_PIN(5, 28), + RCAR_GP_PIN(5, 29), +}; +static const unsigned int avb_gmii_mux[] = { + AVB_TXD0_MARK, AVB_TXD1_MARK, AVB_TXD2_MARK, + AVB_TXD3_MARK, AVB_TXD4_MARK, AVB_TXD5_MARK, + AVB_TXD6_MARK, AVB_TXD7_MARK, + + AVB_RXD0_MARK, AVB_RXD1_MARK, AVB_RXD2_MARK, + AVB_RXD3_MARK, AVB_RXD4_MARK, AVB_RXD5_MARK, + AVB_RXD6_MARK, AVB_RXD7_MARK, + + AVB_RX_ER_MARK, AVB_RX_CLK_MARK, AVB_RX_DV_MARK, + AVB_CRS_MARK, AVB_GTX_CLK_MARK, AVB_GTXREFCLK_MARK, + AVB_TX_EN_MARK, AVB_TX_ER_MARK, AVB_TX_CLK_MARK, + AVB_COL_MARK, +}; + /* - CAN -------------------------------------------------------------------- */ static const unsigned int can0_data_pins[] = { @@ -4258,6 +4334,12 @@ static const struct sh_pfc_pin_group pin SH_PFC_PIN_GROUP(audio_clk_b_b), SH_PFC_PIN_GROUP(audio_clk_c), SH_PFC_PIN_GROUP(audio_clkout), + SH_PFC_PIN_GROUP(avb_link), + SH_PFC_PIN_GROUP(avb_magic), + SH_PFC_PIN_GROUP(avb_phy_int), + SH_PFC_PIN_GROUP(avb_mdio), + SH_PFC_PIN_GROUP(avb_mii), + SH_PFC_PIN_GROUP(avb_gmii), SH_PFC_PIN_GROUP(can0_data), SH_PFC_PIN_GROUP(can0_data_b), SH_PFC_PIN_GROUP(can0_data_c), @@ -4597,6 +4679,15 @@ static const char * const audio_clk_grou "audio_clkout", }; +static const char * const avb_groups[] = { + "avb_link", + "avb_magic", + "avb_phy_int", + "avb_mdio", + "avb_mii", + "avb_gmii", +}; + static const char * const can0_groups[] = { "can0_data", "can0_data_b", @@ -5081,6 +5172,7 @@ static const char * const vin2_groups[] static const struct sh_pfc_function pinmux_functions[] = { SH_PFC_FUNCTION(audio_clk), + SH_PFC_FUNCTION(avb), SH_PFC_FUNCTION(can0), SH_PFC_FUNCTION(can1), SH_PFC_FUNCTION(du),
Add the EtherAVB pin groups to the R8A7791 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- The patch is against the 'devel' branch of Linus W.'s 'linux-pinctrl.git' repo. drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 92 +++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html