diff mbox

[v6,6/9] media: i2c: ov772x: Remove soc_camera dependencies

Message ID 1516139101-7835-7-git-send-email-jacopo+renesas@jmondi.org (mailing list archive)
State New, archived
Headers show

Commit Message

Jacopo Mondi Jan. 16, 2018, 9:44 p.m. UTC
Remove soc_camera framework dependencies from ov772x sensor driver.
- Handle clock and gpios
- Register async subdevice
- Remove soc_camera specific g/s_mbus_config operations
- Change image format colorspace from JPEG to SRGB as the two use the
  same colorspace information but JPEG makes assumptions on color
  components quantization that do not apply to the sensor
- Remove sizes crop from get_selection as driver can't scale
- Add kernel doc to driver interface header file
- Adjust build system

This commit does not remove the original soc_camera based driver as long
as other platforms depends on soc_camera-based CEU driver.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/i2c/Kconfig  |  11 +++
 drivers/media/i2c/Makefile |   1 +
 drivers/media/i2c/ov772x.c | 169 ++++++++++++++++++++++++++++++---------------
 include/media/i2c/ov772x.h |   6 +-
 4 files changed, 130 insertions(+), 57 deletions(-)

Comments

Hans Verkuil Jan. 19, 2018, 10:24 a.m. UTC | #1
On 01/16/18 22:44, Jacopo Mondi wrote:
> Remove soc_camera framework dependencies from ov772x sensor driver.
> - Handle clock and gpios
> - Register async subdevice
> - Remove soc_camera specific g/s_mbus_config operations
> - Change image format colorspace from JPEG to SRGB as the two use the
>   same colorspace information but JPEG makes assumptions on color
>   components quantization that do not apply to the sensor
> - Remove sizes crop from get_selection as driver can't scale
> - Add kernel doc to driver interface header file
> - Adjust build system
> 
> This commit does not remove the original soc_camera based driver as long
> as other platforms depends on soc_camera-based CEU driver.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>

Regards,

	Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Hans Verkuil Jan. 19, 2018, 10:47 a.m. UTC | #2
On 01/19/18 11:24, Hans Verkuil wrote:
> On 01/16/18 22:44, Jacopo Mondi wrote:
>> Remove soc_camera framework dependencies from ov772x sensor driver.
>> - Handle clock and gpios
>> - Register async subdevice
>> - Remove soc_camera specific g/s_mbus_config operations
>> - Change image format colorspace from JPEG to SRGB as the two use the
>>   same colorspace information but JPEG makes assumptions on color
>>   components quantization that do not apply to the sensor
>> - Remove sizes crop from get_selection as driver can't scale
>> - Add kernel doc to driver interface header file
>> - Adjust build system
>>
>> This commit does not remove the original soc_camera based driver as long
>> as other platforms depends on soc_camera-based CEU driver.
>>
>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>

Un-acked.

I just noticed that this sensor driver has no enum_frame_interval and
g/s_parm support. How would a driver ever know the frame rate of the
sensor without that?

This looks like a bug to me.

Regards,

	Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sakari Ailus Jan. 19, 2018, 11:19 a.m. UTC | #3
Hi Hans,

On Fri, Jan 19, 2018 at 11:47:33AM +0100, Hans Verkuil wrote:
> On 01/19/18 11:24, Hans Verkuil wrote:
> > On 01/16/18 22:44, Jacopo Mondi wrote:
> >> Remove soc_camera framework dependencies from ov772x sensor driver.
> >> - Handle clock and gpios
> >> - Register async subdevice
> >> - Remove soc_camera specific g/s_mbus_config operations
> >> - Change image format colorspace from JPEG to SRGB as the two use the
> >>   same colorspace information but JPEG makes assumptions on color
> >>   components quantization that do not apply to the sensor
> >> - Remove sizes crop from get_selection as driver can't scale
> >> - Add kernel doc to driver interface header file
> >> - Adjust build system
> >>
> >> This commit does not remove the original soc_camera based driver as long
> >> as other platforms depends on soc_camera-based CEU driver.
> >>
> >> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> >> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > 
> > Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
> 
> Un-acked.
> 
> I just noticed that this sensor driver has no enum_frame_interval and
> g/s_parm support. How would a driver ever know the frame rate of the
> sensor without that?

s/_parm/_frame_interval/ ?

We should have wrappers for this or rather to convert g/s_parm users to
g/s_frame_interval so drivers don't need to implement both.
Hans Verkuil Jan. 19, 2018, 11:44 a.m. UTC | #4
On 01/19/18 12:19, Sakari Ailus wrote:
> Hi Hans,
> 
> On Fri, Jan 19, 2018 at 11:47:33AM +0100, Hans Verkuil wrote:
>> On 01/19/18 11:24, Hans Verkuil wrote:
>>> On 01/16/18 22:44, Jacopo Mondi wrote:
>>>> Remove soc_camera framework dependencies from ov772x sensor driver.
>>>> - Handle clock and gpios
>>>> - Register async subdevice
>>>> - Remove soc_camera specific g/s_mbus_config operations
>>>> - Change image format colorspace from JPEG to SRGB as the two use the
>>>>   same colorspace information but JPEG makes assumptions on color
>>>>   components quantization that do not apply to the sensor
>>>> - Remove sizes crop from get_selection as driver can't scale
>>>> - Add kernel doc to driver interface header file
>>>> - Adjust build system
>>>>
>>>> This commit does not remove the original soc_camera based driver as long
>>>> as other platforms depends on soc_camera-based CEU driver.
>>>>
>>>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>>>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>>>
>>> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
>>
>> Un-acked.
>>
>> I just noticed that this sensor driver has no enum_frame_interval and
>> g/s_parm support. How would a driver ever know the frame rate of the
>> sensor without that?
> 
> s/_parm/_frame_interval/ ?

Yes.

> 
> We should have wrappers for this or rather to convert g/s_parm users to
> g/s_frame_interval so drivers don't need to implement both.

We should convert them. I wonder why we didn't?

Regards,

	Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Laurent Pinchart Jan. 19, 2018, 12:23 p.m. UTC | #5
Hello,

On Friday, 19 January 2018 13:19:18 EET Sakari Ailus wrote:
> On Fri, Jan 19, 2018 at 11:47:33AM +0100, Hans Verkuil wrote:
> > On 01/19/18 11:24, Hans Verkuil wrote:
> >> On 01/16/18 22:44, Jacopo Mondi wrote:
> >>> Remove soc_camera framework dependencies from ov772x sensor driver.
> >>> - Handle clock and gpios
> >>> - Register async subdevice
> >>> - Remove soc_camera specific g/s_mbus_config operations
> >>> - Change image format colorspace from JPEG to SRGB as the two use the
> >>>   same colorspace information but JPEG makes assumptions on color
> >>>   components quantization that do not apply to the sensor
> >>> - Remove sizes crop from get_selection as driver can't scale
> >>> - Add kernel doc to driver interface header file
> >>> - Adjust build system
> >>> 
> >>> This commit does not remove the original soc_camera based driver as
> >>> long as other platforms depends on soc_camera-based CEU driver.
> >>> 
> >>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> >>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> >> 
> >> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
> > 
> > Un-acked.
> > 
> > I just noticed that this sensor driver has no enum_frame_interval and
> > g/s_parm support. How would a driver ever know the frame rate of the
> > sensor without that?
> 
> s/_parm/_frame_interval/ ?
> 
> We should have wrappers for this or rather to convert g/s_parm users to
> g/s_frame_interval so drivers don't need to implement both.

There are two ways to set the frame interval, either explicitly through the 
s_frame_interval operation, or implicitly through control of the pixel clock, 
horizontal blanking and vertical blanking (which in turn can be influenced by 
the exposure time).

Having two ways to perform the same operation seems sub-optimal to me, but I 
could understand if they covered different use cases. As far as I know we 
don't document the use cases for those methods. What's your opinion on that ?
Jacopo Mondi Jan. 21, 2018, 9:31 a.m. UTC | #6
Hello Hans, Laurent, Sakari,

On Fri, Jan 19, 2018 at 02:23:21PM +0200, Laurent Pinchart wrote:
> Hello,
>
> On Friday, 19 January 2018 13:19:18 EET Sakari Ailus wrote:
> > On Fri, Jan 19, 2018 at 11:47:33AM +0100, Hans Verkuil wrote:
> > > On 01/19/18 11:24, Hans Verkuil wrote:
> > >> On 01/16/18 22:44, Jacopo Mondi wrote:
> > >>> Remove soc_camera framework dependencies from ov772x sensor driver.
> > >>> - Handle clock and gpios
> > >>> - Register async subdevice
> > >>> - Remove soc_camera specific g/s_mbus_config operations
> > >>> - Change image format colorspace from JPEG to SRGB as the two use the
> > >>>   same colorspace information but JPEG makes assumptions on color
> > >>>   components quantization that do not apply to the sensor
> > >>> - Remove sizes crop from get_selection as driver can't scale
> > >>> - Add kernel doc to driver interface header file
> > >>> - Adjust build system
> > >>>
> > >>> This commit does not remove the original soc_camera based driver as
> > >>> long as other platforms depends on soc_camera-based CEU driver.
> > >>>
> > >>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > >>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > >>
> > >> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
> > >
> > > Un-acked.
> > >
> > > I just noticed that this sensor driver has no enum_frame_interval and
> > > g/s_parm support. How would a driver ever know the frame rate of the
> > > sensor without that?

Does it make any difference if I point out that this series hasn't
removed any of that code, and the driver was not supporting that
already? Or was it handled through soc_camera?

> >
> > s/_parm/_frame_interval/ ?
> >
> > We should have wrappers for this or rather to convert g/s_parm users to
> > g/s_frame_interval so drivers don't need to implement both.
>
> There are two ways to set the frame interval, either explicitly through the
> s_frame_interval operation, or implicitly through control of the pixel clock,
> horizontal blanking and vertical blanking (which in turn can be influenced by
> the exposure time).
>
> Having two ways to perform the same operation seems sub-optimal to me, but I
> could understand if they covered different use cases. As far as I know we
> don't document the use cases for those methods. What's your opinion on that ?
>

-If- I have to implement that in this series to have it accepted,
please let me know which one of the two is the preferred one :)

Thanks
   j


> --
> Regards,
>
> Laurent Pinchart
>
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Hans Verkuil Jan. 21, 2018, 10:18 a.m. UTC | #7
On 21/01/18 10:31, jacopo mondi wrote:
> Hello Hans, Laurent, Sakari,
> 
> On Fri, Jan 19, 2018 at 02:23:21PM +0200, Laurent Pinchart wrote:
>> Hello,
>>
>> On Friday, 19 January 2018 13:19:18 EET Sakari Ailus wrote:
>>> On Fri, Jan 19, 2018 at 11:47:33AM +0100, Hans Verkuil wrote:
>>>> On 01/19/18 11:24, Hans Verkuil wrote:
>>>>> On 01/16/18 22:44, Jacopo Mondi wrote:
>>>>>> Remove soc_camera framework dependencies from ov772x sensor driver.
>>>>>> - Handle clock and gpios
>>>>>> - Register async subdevice
>>>>>> - Remove soc_camera specific g/s_mbus_config operations
>>>>>> - Change image format colorspace from JPEG to SRGB as the two use the
>>>>>>   same colorspace information but JPEG makes assumptions on color
>>>>>>   components quantization that do not apply to the sensor
>>>>>> - Remove sizes crop from get_selection as driver can't scale
>>>>>> - Add kernel doc to driver interface header file
>>>>>> - Adjust build system
>>>>>>
>>>>>> This commit does not remove the original soc_camera based driver as
>>>>>> long as other platforms depends on soc_camera-based CEU driver.
>>>>>>
>>>>>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>>>>>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>>>>>
>>>>> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
>>>>
>>>> Un-acked.
>>>>
>>>> I just noticed that this sensor driver has no enum_frame_interval and
>>>> g/s_parm support. How would a driver ever know the frame rate of the
>>>> sensor without that?
> 
> Does it make any difference if I point out that this series hasn't
> removed any of that code, and the driver was not supporting that
> already? Or was it handled through soc_camera?

That last question is a good one. Can you check?

There are two sh boards that use this sensor. Are you able to test on one
of those boards?

There is reversed engineered code for the ox772x here:
drivers/media/usb/gspca/ov534.c

That appears to handle framerates.

I am very uncomfortable promoting this driver to drivers/media/i2c without
having functioning frame interval handling. It could be as simple as a single
fixed framerate, it doesn't have to be fancy. Without it it is basically
unusable by applications since those typically expect support for this.

Moving it to staging might be another option, with a TODO mentioning this
missing feature.

> 
>>>
>>> s/_parm/_frame_interval/ ?
>>>
>>> We should have wrappers for this or rather to convert g/s_parm users to
>>> g/s_frame_interval so drivers don't need to implement both.
>>
>> There are two ways to set the frame interval, either explicitly through the
>> s_frame_interval operation, or implicitly through control of the pixel clock,
>> horizontal blanking and vertical blanking (which in turn can be influenced by
>> the exposure time).
>>
>> Having two ways to perform the same operation seems sub-optimal to me, but I
>> could understand if they covered different use cases. As far as I know we
>> don't document the use cases for those methods. What's your opinion on that ?
>>
> 
> -If- I have to implement that in this series to have it accepted,
> please let me know which one of the two is the preferred one :)

g/s_frame_interval. The other is (I think) for highly specialized devices. For
regular normal sensors I do not think it makes much sense. Certainly not for
fairly old sensors like this one.

Regards,

	Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index cb5d7ff..a61d7f4 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -645,6 +645,17 @@  config VIDEO_OV5670
 	  To compile this driver as a module, choose M here: the
 	  module will be called ov5670.
 
+config VIDEO_OV772X
+	tristate "OmniVision OV772x sensor support"
+	depends on I2C && VIDEO_V4L2
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the OmniVision
+	  OV772x camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ov772x.
+
 config VIDEO_OV7640
 	tristate "OmniVision OV7640 sensor support"
 	depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 548a9ef..fb99293 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -66,6 +66,7 @@  obj-$(CONFIG_VIDEO_OV5645) += ov5645.o
 obj-$(CONFIG_VIDEO_OV5647) += ov5647.o
 obj-$(CONFIG_VIDEO_OV5670) += ov5670.o
 obj-$(CONFIG_VIDEO_OV6650) += ov6650.o
+obj-$(CONFIG_VIDEO_OV772X) += ov772x.o
 obj-$(CONFIG_VIDEO_OV7640) += ov7640.o
 obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
 obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 8063835..912b1b9 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -1,6 +1,9 @@ 
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ov772x Camera Driver
  *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
  * Copyright (C) 2008 Renesas Solutions Corp.
  * Kuninori Morimoto <morimoto.kuninori@renesas.com>
  *
@@ -9,27 +12,25 @@ 
  * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
  * Copyright (C) 2008 Magnus Damm
  * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/i2c.h>
 #include <linux/slab.h>
-#include <linux/delay.h>
 #include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
 
 #include <media/i2c/ov772x.h>
-#include <media/soc_camera.h>
-#include <media/v4l2-clk.h>
+
 #include <media/v4l2-ctrls.h>
-#include <media/v4l2-subdev.h>
+#include <media/v4l2-device.h>
 #include <media/v4l2-image-sizes.h>
+#include <media/v4l2-subdev.h>
 
 /*
  * register offset
@@ -393,8 +394,10 @@  struct ov772x_win_size {
 struct ov772x_priv {
 	struct v4l2_subdev                subdev;
 	struct v4l2_ctrl_handler	  hdl;
-	struct v4l2_clk			 *clk;
+	struct clk			 *clk;
 	struct ov772x_camera_info        *info;
+	struct gpio_desc		 *pwdn_gpio;
+	struct gpio_desc		 *rstb_gpio;
 	const struct ov772x_color_format *cfmt;
 	const struct ov772x_win_size     *win;
 	unsigned short                    flag_vflip:1;
@@ -409,7 +412,7 @@  struct ov772x_priv {
 static const struct ov772x_color_format ov772x_cfmts[] = {
 	{
 		.code		= MEDIA_BUS_FMT_YUYV8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
 		.dsp3		= 0x0,
 		.dsp4		= DSP_OFMT_YUV,
 		.com3		= SWAP_YUV,
@@ -417,7 +420,7 @@  static const struct ov772x_color_format ov772x_cfmts[] = {
 	},
 	{
 		.code		= MEDIA_BUS_FMT_YVYU8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
 		.dsp3		= UV_ON,
 		.dsp4		= DSP_OFMT_YUV,
 		.com3		= SWAP_YUV,
@@ -425,7 +428,7 @@  static const struct ov772x_color_format ov772x_cfmts[] = {
 	},
 	{
 		.code		= MEDIA_BUS_FMT_UYVY8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
 		.dsp3		= 0x0,
 		.dsp4		= DSP_OFMT_YUV,
 		.com3		= 0x0,
@@ -550,7 +553,7 @@  static int ov772x_reset(struct i2c_client *client)
 }
 
 /*
- * soc_camera_ops function
+ * subdev ops
  */
 
 static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
@@ -650,13 +653,65 @@  static int ov772x_s_register(struct v4l2_subdev *sd,
 }
 #endif
 
+static int ov772x_power_on(struct ov772x_priv *priv)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+	int ret;
+
+	if (priv->clk) {
+		ret = clk_prepare_enable(priv->clk);
+		if (ret)
+			return ret;
+	}
+
+	if (priv->pwdn_gpio) {
+		gpiod_set_value(priv->pwdn_gpio, 1);
+		usleep_range(500, 1000);
+	}
+
+	/*
+	 * FIXME: The reset signal is connected to a shared GPIO on some
+	 * platforms (namely the SuperH Migo-R). Until a framework becomes
+	 * available to handle this cleanly, request the GPIO temporarily
+	 * to avoid conflicts.
+	 */
+	priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(priv->rstb_gpio)) {
+		dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
+		return PTR_ERR(priv->rstb_gpio);
+	}
+
+	if (priv->rstb_gpio) {
+		gpiod_set_value(priv->rstb_gpio, 1);
+		usleep_range(500, 1000);
+		gpiod_set_value(priv->rstb_gpio, 0);
+		usleep_range(500, 1000);
+
+		gpiod_put(priv->rstb_gpio);
+	}
+
+	return 0;
+}
+
+static int ov772x_power_off(struct ov772x_priv *priv)
+{
+	clk_disable_unprepare(priv->clk);
+
+	if (priv->pwdn_gpio) {
+		gpiod_set_value(priv->pwdn_gpio, 0);
+		usleep_range(500, 1000);
+	}
+
+	return 0;
+}
+
 static int ov772x_s_power(struct v4l2_subdev *sd, int on)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
 	struct ov772x_priv *priv = to_ov772x(sd);
 
-	return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
+	return on ? ov772x_power_on(priv) :
+		    ov772x_power_off(priv);
 }
 
 static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
@@ -855,6 +910,8 @@  static int ov772x_get_selection(struct v4l2_subdev *sd,
 		struct v4l2_subdev_pad_config *cfg,
 		struct v4l2_subdev_selection *sel)
 {
+	struct ov772x_priv *priv = to_ov772x(sd);
+
 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
 		return -EINVAL;
 
@@ -863,12 +920,9 @@  static int ov772x_get_selection(struct v4l2_subdev *sd,
 	switch (sel->target) {
 	case V4L2_SEL_TGT_CROP_BOUNDS:
 	case V4L2_SEL_TGT_CROP_DEFAULT:
-		sel->r.width = OV772X_MAX_WIDTH;
-		sel->r.height = OV772X_MAX_HEIGHT;
-		return 0;
 	case V4L2_SEL_TGT_CROP:
-		sel->r.width = VGA_WIDTH;
-		sel->r.height = VGA_HEIGHT;
+		sel->r.width = priv->win->rect.width;
+		sel->r.height = priv->win->rect.height;
 		return 0;
 	default:
 		return -EINVAL;
@@ -997,24 +1051,8 @@  static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int ov772x_g_mbus_config(struct v4l2_subdev *sd,
-				struct v4l2_mbus_config *cfg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
-	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
-		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
-		V4L2_MBUS_DATA_ACTIVE_HIGH;
-	cfg->type = V4L2_MBUS_PARALLEL;
-	cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
-
-	return 0;
-}
-
 static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
 	.s_stream	= ov772x_s_stream,
-	.g_mbus_config	= ov772x_g_mbus_config,
 };
 
 static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
@@ -1038,12 +1076,11 @@  static int ov772x_probe(struct i2c_client *client,
 			const struct i2c_device_id *did)
 {
 	struct ov772x_priv	*priv;
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-	struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent);
+	struct i2c_adapter	*adapter = client->adapter;
 	int			ret;
 
-	if (!ssdd || !ssdd->drv_priv) {
-		dev_err(&client->dev, "OV772X: missing platform data!\n");
+	if (!client->dev.platform_data) {
+		dev_err(&client->dev, "Missing ov772x platform data\n");
 		return -EINVAL;
 	}
 
@@ -1059,7 +1096,7 @@  static int ov772x_probe(struct i2c_client *client,
 	if (!priv)
 		return -ENOMEM;
 
-	priv->info = ssdd->drv_priv;
+	priv->info = client->dev.platform_data;
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
 	v4l2_ctrl_handler_init(&priv->hdl, 3);
@@ -1073,22 +1110,42 @@  static int ov772x_probe(struct i2c_client *client,
 	if (priv->hdl.error)
 		return priv->hdl.error;
 
-	priv->clk = v4l2_clk_get(&client->dev, "mclk");
+	priv->clk = clk_get(&client->dev, "xclk");
 	if (IS_ERR(priv->clk)) {
+		dev_err(&client->dev, "Unable to get xclk clock\n");
 		ret = PTR_ERR(priv->clk);
-		goto eclkget;
+		goto error_ctrl_free;
 	}
 
-	ret = ov772x_video_probe(priv);
-	if (ret < 0) {
-		v4l2_clk_put(priv->clk);
-eclkget:
-		v4l2_ctrl_handler_free(&priv->hdl);
-	} else {
-		priv->cfmt = &ov772x_cfmts[0];
-		priv->win = &ov772x_win_sizes[0];
+	priv->pwdn_gpio = gpiod_get_optional(&client->dev, "pwdn",
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(priv->pwdn_gpio)) {
+		dev_info(&client->dev, "Unable to get GPIO \"pwdn\"");
+		ret = PTR_ERR(priv->pwdn_gpio);
+		goto error_clk_put;
 	}
 
+	ret = ov772x_video_probe(priv);
+	if (ret < 0)
+		goto error_gpio_put;
+
+	priv->cfmt = &ov772x_cfmts[0];
+	priv->win = &ov772x_win_sizes[0];
+
+	ret = v4l2_async_register_subdev(&priv->subdev);
+	if (ret)
+		goto error_gpio_put;
+
+	return 0;
+
+error_gpio_put:
+	if (priv->pwdn_gpio)
+		gpiod_put(priv->pwdn_gpio);
+error_clk_put:
+	clk_put(priv->clk);
+error_ctrl_free:
+	v4l2_ctrl_handler_free(&priv->hdl);
+
 	return ret;
 }
 
@@ -1096,7 +1153,9 @@  static int ov772x_remove(struct i2c_client *client)
 {
 	struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client));
 
-	v4l2_clk_put(priv->clk);
+	clk_put(priv->clk);
+	if (priv->pwdn_gpio)
+		gpiod_put(priv->pwdn_gpio);
 	v4l2_device_unregister_subdev(&priv->subdev);
 	v4l2_ctrl_handler_free(&priv->hdl);
 	return 0;
@@ -1119,6 +1178,6 @@  static struct i2c_driver ov772x_i2c_driver = {
 
 module_i2c_driver(ov772x_i2c_driver);
 
-MODULE_DESCRIPTION("SoC Camera driver for ov772x");
+MODULE_DESCRIPTION("V4L2 driver for OV772x image sensor");
 MODULE_AUTHOR("Kuninori Morimoto");
 MODULE_LICENSE("GPL v2");
diff --git a/include/media/i2c/ov772x.h b/include/media/i2c/ov772x.h
index 00dbb7c..27d087b 100644
--- a/include/media/i2c/ov772x.h
+++ b/include/media/i2c/ov772x.h
@@ -48,8 +48,10 @@  struct ov772x_edge_ctrl {
 	.threshold = (t & OV772X_EDGE_THRESHOLD_MASK),	\
 }
 
-/*
- * ov772x camera info
+/**
+ * ov772x_camera_info -	ov772x driver interface structure
+ * @flags:		Sensor configuration flags
+ * @edgectrl:		Sensor edge control
  */
 struct ov772x_camera_info {
 	unsigned long		flags;