===================================================================
@@ -1558,7 +1558,7 @@ ignore_link:
if (intr_status & EESR_TABT) { /* Transmit Abort int */
ndev->stats.tx_aborted_errors++;
if (netif_msg_tx_err(mdp))
- dev_err(&ndev->dev, "Transmit Abort\n");
+ netdev_err(ndev, "Transmit Abort\n");
}
}
@@ -1568,7 +1568,7 @@ ignore_link:
/* Receive Frame Overflow int */
ndev->stats.rx_frame_errors++;
if (netif_msg_rx_err(mdp))
- dev_err(&ndev->dev, "Receive Abort\n");
+ netdev_err(ndev, "Receive Abort\n");
}
}
@@ -1576,14 +1576,14 @@ ignore_link:
/* Transmit Descriptor Empty int */
ndev->stats.tx_fifo_errors++;
if (netif_msg_tx_err(mdp))
- dev_err(&ndev->dev, "Transmit Descriptor Empty\n");
+ netdev_err(ndev, "Transmit Descriptor Empty\n");
}
if (intr_status & EESR_TFE) {
/* FIFO under flow */
ndev->stats.tx_fifo_errors++;
if (netif_msg_tx_err(mdp))
- dev_err(&ndev->dev, "Transmit FIFO Under flow\n");
+ netdev_err(ndev, "Transmit FIFO Under flow\n");
}
if (intr_status & EESR_RDE) {
@@ -1591,21 +1591,21 @@ ignore_link:
ndev->stats.rx_over_errors++;
if (netif_msg_rx_err(mdp))
- dev_err(&ndev->dev, "Receive Descriptor Empty\n");
+ netdev_err(ndev, "Receive Descriptor Empty\n");
}
if (intr_status & EESR_RFE) {
/* Receive FIFO Overflow int */
ndev->stats.rx_fifo_errors++;
if (netif_msg_rx_err(mdp))
- dev_err(&ndev->dev, "Receive FIFO Overflow\n");
+ netdev_err(ndev, "Receive FIFO Overflow\n");
}
if (!mdp->cd->no_ade && (intr_status & EESR_ADE)) {
/* Address Error */
ndev->stats.tx_fifo_errors++;
if (netif_msg_tx_err(mdp))
- dev_err(&ndev->dev, "Address Error\n");
+ netdev_err(ndev, "Address Error\n");
}
mask = EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE;
@@ -1616,9 +1616,9 @@ ignore_link:
u32 edtrr = sh_eth_read(ndev, EDTRR);
/* dmesg */
- dev_err(&ndev->dev, "TX error. status=%8.8x cur_tx=%8.8x dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
- intr_status, mdp->cur_tx, mdp->dirty_tx,
- (u32)ndev->state, edtrr);
+ netdev_err(ndev, "TX error. status=%8.8x cur_tx=%8.8x dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
+ intr_status, mdp->cur_tx, mdp->dirty_tx,
+ (u32)ndev->state, edtrr);
/* dirty buffer free */
sh_eth_txfree(ndev);
@@ -1663,9 +1663,9 @@ static irqreturn_t sh_eth_interrupt(int
EESIPR);
__napi_schedule(&mdp->napi);
} else {
- dev_warn(&ndev->dev,
- "ignoring interrupt, status 0x%08lx, mask 0x%08lx.\n",
- intr_status, intr_enable);
+ netdev_warn(ndev,
+ "ignoring interrupt, status 0x%08lx, mask 0x%08lx.\n",
+ intr_status, intr_enable);
}
}
@@ -1794,12 +1794,12 @@ static int sh_eth_phy_init(struct net_de
}
if (IS_ERR(phydev)) {
- dev_err(&ndev->dev, "failed to connect PHY\n");
+ netdev_err(ndev, "failed to connect PHY\n");
return PTR_ERR(phydev);
}
- dev_info(&ndev->dev, "attached PHY %d (IRQ %d) to driver %s\n",
- phydev->addr, phydev->irq, phydev->drv->name);
+ netdev_info(ndev, "attached PHY %d (IRQ %d) to driver %s\n",
+ phydev->addr, phydev->irq, phydev->drv->name);
mdp->phydev = phydev;
@@ -1980,12 +1980,12 @@ static int sh_eth_set_ringparam(struct n
ret = sh_eth_ring_init(ndev);
if (ret < 0) {
- dev_err(&ndev->dev, "%s: sh_eth_ring_init failed.\n", __func__);
+ netdev_err(ndev, "%s: sh_eth_ring_init failed.\n", __func__);
return ret;
}
ret = sh_eth_dev_init(ndev, false);
if (ret < 0) {
- dev_err(&ndev->dev, "%s: sh_eth_dev_init failed.\n", __func__);
+ netdev_err(ndev, "%s: sh_eth_dev_init failed.\n", __func__);
return ret;
}
@@ -2026,7 +2026,7 @@ static int sh_eth_open(struct net_device
ret = request_irq(ndev->irq, sh_eth_interrupt,
mdp->cd->irq_flags, ndev->name, ndev);
if (ret) {
- dev_err(&ndev->dev, "Can not assign IRQ number\n");
+ netdev_err(ndev, "Can not assign IRQ number\n");
goto out_napi_off;
}
@@ -2065,8 +2065,9 @@ static void sh_eth_tx_timeout(struct net
netif_stop_queue(ndev);
if (netif_msg_timer(mdp)) {
- dev_err(&ndev->dev, "%s: transmit timed out, status %8.8x, resetting...\n",
- ndev->name, (int)sh_eth_read(ndev, EESR));
+ netdev_err(ndev,
+ "transmit timed out, status %8.8x, resetting...\n",
+ (int)sh_eth_read(ndev, EESR));
}
/* tx_errors count up */
@@ -2103,7 +2104,7 @@ static int sh_eth_start_xmit(struct sk_b
if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) {
if (!sh_eth_txfree(ndev)) {
if (netif_msg_tx_queued(mdp))
- dev_warn(&ndev->dev, "TxFD exhausted.\n");
+ netdev_warn(ndev, "TxFD exhausted.\n");
netif_stop_queue(ndev);
spin_unlock_irqrestore(&mdp->lock, flags);
return NETDEV_TX_BUSY;
@@ -2273,7 +2274,7 @@ static int sh_eth_tsu_busy(struct net_de
udelay(10);
timeout--;
if (timeout <= 0) {
- dev_err(&ndev->dev, "%s: timeout\n", __func__);
+ netdev_err(ndev, "%s: timeout\n", __func__);
return -ETIMEDOUT;
}
}
Convert dev_*(&ndev->dev, ...) to netdev_*(ndev, ...) calls since they are a bit shorter and at the same time give more information on a device. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- drivers/net/ethernet/renesas/sh_eth.c | 47 +++++++++++++++++----------------- 1 file changed, 24 insertions(+), 23 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html