@@ -361,7 +361,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \
- r8a7740-armadillo800eva-reference.dtb \
r8a7779-marzen.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
@@ -1,300 +0,0 @@
-/*
- * Reference Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7740.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "armadillo 800 eva reference";
- compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
-
- aliases {
- serial1 = &scifa1;
- };
-
- chosen {
- bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
- };
-
- memory {
- device_type = "memory";
- reg = <0x40000000 0x20000000>;
- };
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_sdhi0: regulator@1 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator@2 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_sdhi0>;
-
- enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
- gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
- states = <3300000 0
- 1800000 1>;
-
- enable-active-high;
- };
-
- reg_5p0v: regulator@3 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-5.0V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power-key {
- gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "SW3";
- gpio-key,wakeup;
- };
-
- back-key {
- gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_BACK>;
- label = "SW4";
- };
-
- menu-key {
- gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_MENU>;
- label = "SW5";
- };
-
- home-key {
- gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_HOME>;
- label = "SW6";
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led3 {
- gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
- label = "LED3";
- };
- led4 {
- gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
- label = "LED4";
- };
- led5 {
- gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
- label = "LED5";
- };
- led6 {
- gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
- label = "LED6";
- };
- };
-
- i2c2: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "i2c-gpio";
- gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
- &pfc 91 GPIO_ACTIVE_HIGH /* scl */
- >;
- i2c-gpio,delay-us = <5>;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
- default-brightness-level = <9>;
- pinctrl-0 = <&backlight_pins>;
- pinctrl-names = "default";
- power-supply = <®_5p0v>;
- enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
- };
-
- sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "i2s";
-
- simple-audio-card,cpu {
- sound-dai = <&sh_fsi2 0>;
- bitclock-inversion;
- };
-
- simple-audio-card,codec {
- sound-dai = <&wm8978>;
- bitclock-master;
- frame-master;
- system-clock-frequency = <12288000>;
- };
- };
-};
-
-ðer {
- pinctrl-0 = <ðer_pins>;
- pinctrl-names = "default";
-
- phy-handle = <&phy0>;
- status = "ok";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&extal1_clk {
- clock-frequency = <25000000>;
-};
-&extal2_clk {
- clock-frequency = <48000000>;
-};
-&fsibck_clk {
- clock-frequency = <12288000>;
-};
-&cpg_clocks {
- renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */
-};
-
-&cmt1 {
- status = "ok";
-};
-
-&i2c0 {
- status = "okay";
- touchscreen@55 {
- compatible = "sitronix,st1232";
- reg = <0x55>;
- interrupt-parent = <&irqpin1>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-0 = <&st1232_pins>;
- pinctrl-names = "default";
- gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
- };
-
- wm8978: wm8978@1a {
- #sound-dai-cells = <0>;
- compatible = "wlf,wm8978";
- reg = <0x1a>;
- };
-};
-
-&i2c2 {
- status = "okay";
- rtc@30 {
- compatible = "sii,s35390a";
- reg = <0x30>;
- };
-};
-
-&pfc {
- ether_pins: ether {
- renesas,groups = "gether_mii", "gether_int";
- renesas,function = "gether";
- };
-
- scifa1_pins: serial1 {
- renesas,groups = "scifa1_data";
- renesas,function = "scifa1";
- };
-
- st1232_pins: touchscreen {
- renesas,groups = "intc_irq10";
- renesas,function = "intc";
- };
-
- backlight_pins: backlight {
- renesas,groups = "tpu0_to2_1";
- renesas,function = "tpu0";
- };
-
- mmc0_pins: mmc0 {
- renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
- renesas,function = "mmc0";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
- renesas,function = "sdhi0";
- };
-
- fsia_pins: sounda {
- renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
- "fsia_data_in_1", "fsia_data_out_0";
- renesas,function = "fsia";
- };
-};
-
-&tpu {
- status = "okay";
-};
-
-&mmcif0 {
- pinctrl-0 = <&mmc0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <®_3p3v>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&scifa1 {
- pinctrl-0 = <&scifa1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- bus-width = <4>;
- cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&sh_fsi2 {
- pinctrl-0 = <&fsia_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};