diff mbox series

[v3,5/9] mm: remove CONFIG_DISCONTIGMEM

Message ID 20210608091316.3622-6-rppt@kernel.org (mailing list archive)
State New
Headers show
Series Remove DISCONTIGMEM memory model | expand

Commit Message

Mike Rapoport June 8, 2021, 9:13 a.m. UTC
From: Mike Rapoport <rppt@linux.ibm.com>

There are no architectures that support DISCONTIGMEM left.

Remove the configuration option and the dead code it was guarding in the
generic memory management code.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
---
 include/asm-generic/memory_model.h | 37 ++++--------------------------
 include/linux/mmzone.h             |  8 ++++---
 mm/Kconfig                         | 25 +++-----------------
 mm/page_alloc.c                    | 13 -----------
 4 files changed, 12 insertions(+), 71 deletions(-)

Comments

Stephen Brennan June 11, 2021, 8:53 p.m. UTC | #1
Mike Rapoport <rppt@kernel.org> writes:
> From: Mike Rapoport <rppt@linux.ibm.com>
>
> There are no architectures that support DISCONTIGMEM left.
>
> Remove the configuration option and the dead code it was guarding in the
> generic memory management code.
>
> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> ---
>  include/asm-generic/memory_model.h | 37 ++++--------------------------
>  include/linux/mmzone.h             |  8 ++++---
>  mm/Kconfig                         | 25 +++-----------------
>  mm/page_alloc.c                    | 13 -----------
>  4 files changed, 12 insertions(+), 71 deletions(-)
>
> diff --git a/include/asm-generic/memory_model.h b/include/asm-generic/memory_model.h
> index 7637fb46ba4f..a2c8ed60233a 100644
> --- a/include/asm-generic/memory_model.h
> +++ b/include/asm-generic/memory_model.h
> @@ -6,47 +6,18 @@
>  
>  #ifndef __ASSEMBLY__
>  
> +/*
> + * supports 3 memory models.
> + */

This comment could either be updated to reflect 2 memory models, or
removed entirely.

Thanks,
Stephen

>  #if defined(CONFIG_FLATMEM)
>  
>  #ifndef ARCH_PFN_OFFSET
>  #define ARCH_PFN_OFFSET		(0UL)
>  #endif
>  
> -#elif defined(CONFIG_DISCONTIGMEM)
> -
> -#ifndef arch_pfn_to_nid
> -#define arch_pfn_to_nid(pfn)	pfn_to_nid(pfn)
> -#endif
> -
> -#ifndef arch_local_page_offset
> -#define arch_local_page_offset(pfn, nid)	\
> -	((pfn) - NODE_DATA(nid)->node_start_pfn)
> -#endif
> -
> -#endif /* CONFIG_DISCONTIGMEM */
> -
> -/*
> - * supports 3 memory models.
> - */
> -#if defined(CONFIG_FLATMEM)
> -
>  #define __pfn_to_page(pfn)	(mem_map + ((pfn) - ARCH_PFN_OFFSET))
>  #define __page_to_pfn(page)	((unsigned long)((page) - mem_map) + \
>  				 ARCH_PFN_OFFSET)
> -#elif defined(CONFIG_DISCONTIGMEM)
> -
> -#define __pfn_to_page(pfn)			\
> -({	unsigned long __pfn = (pfn);		\
> -	unsigned long __nid = arch_pfn_to_nid(__pfn);  \
> -	NODE_DATA(__nid)->node_mem_map + arch_local_page_offset(__pfn, __nid);\
> -})
> -
> -#define __page_to_pfn(pg)						\
> -({	const struct page *__pg = (pg);					\
> -	struct pglist_data *__pgdat = NODE_DATA(page_to_nid(__pg));	\
> -	(unsigned long)(__pg - __pgdat->node_mem_map) +			\
> -	 __pgdat->node_start_pfn;					\
> -})
>  
>  #elif defined(CONFIG_SPARSEMEM_VMEMMAP)
>  
> @@ -70,7 +41,7 @@
>  	struct mem_section *__sec = __pfn_to_section(__pfn);	\
>  	__section_mem_map_addr(__sec) + __pfn;		\
>  })
> -#endif /* CONFIG_FLATMEM/DISCONTIGMEM/SPARSEMEM */
> +#endif /* CONFIG_FLATMEM/SPARSEMEM */
>  
>  /*
>   * Convert a physical address to a Page Frame Number and back
> diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
> index 0d53eba1c383..700032e99419 100644
> --- a/include/linux/mmzone.h
> +++ b/include/linux/mmzone.h
> @@ -738,10 +738,12 @@ struct zonelist {
>  	struct zoneref _zonerefs[MAX_ZONES_PER_ZONELIST + 1];
>  };
>  
> -#ifndef CONFIG_DISCONTIGMEM
> -/* The array of struct pages - for discontigmem use pgdat->lmem_map */
> +/*
> + * The array of struct pages for flatmem.
> + * It must be declared for SPARSEMEM as well because there are configurations
> + * that rely on that.
> + */
>  extern struct page *mem_map;
> -#endif
>  
>  #ifdef CONFIG_TRANSPARENT_HUGEPAGE
>  struct deferred_split {
> diff --git a/mm/Kconfig b/mm/Kconfig
> index 02d44e3420f5..218b96ccc84a 100644
> --- a/mm/Kconfig
> +++ b/mm/Kconfig
> @@ -19,7 +19,7 @@ choice
>  
>  config FLATMEM_MANUAL
>  	bool "Flat Memory"
> -	depends on !(ARCH_DISCONTIGMEM_ENABLE || ARCH_SPARSEMEM_ENABLE) || ARCH_FLATMEM_ENABLE
> +	depends on !ARCH_SPARSEMEM_ENABLE || ARCH_FLATMEM_ENABLE
>  	help
>  	  This option is best suited for non-NUMA systems with
>  	  flat address space. The FLATMEM is the most efficient
> @@ -32,21 +32,6 @@ config FLATMEM_MANUAL
>  
>  	  If unsure, choose this option (Flat Memory) over any other.
>  
> -config DISCONTIGMEM_MANUAL
> -	bool "Discontiguous Memory"
> -	depends on ARCH_DISCONTIGMEM_ENABLE
> -	help
> -	  This option provides enhanced support for discontiguous
> -	  memory systems, over FLATMEM.  These systems have holes
> -	  in their physical address spaces, and this option provides
> -	  more efficient handling of these holes.
> -
> -	  Although "Discontiguous Memory" is still used by several
> -	  architectures, it is considered deprecated in favor of
> -	  "Sparse Memory".
> -
> -	  If unsure, choose "Sparse Memory" over this option.
> -
>  config SPARSEMEM_MANUAL
>  	bool "Sparse Memory"
>  	depends on ARCH_SPARSEMEM_ENABLE
> @@ -62,17 +47,13 @@ config SPARSEMEM_MANUAL
>  
>  endchoice
>  
> -config DISCONTIGMEM
> -	def_bool y
> -	depends on (!SELECT_MEMORY_MODEL && ARCH_DISCONTIGMEM_ENABLE) || DISCONTIGMEM_MANUAL
> -
>  config SPARSEMEM
>  	def_bool y
>  	depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL
>  
>  config FLATMEM
>  	def_bool y
> -	depends on (!DISCONTIGMEM && !SPARSEMEM) || FLATMEM_MANUAL
> +	depends on !SPARSEMEM || FLATMEM_MANUAL
>  
>  config FLAT_NODE_MEM_MAP
>  	def_bool y
> @@ -85,7 +66,7 @@ config FLAT_NODE_MEM_MAP
>  #
>  config NEED_MULTIPLE_NODES
>  	def_bool y
> -	depends on DISCONTIGMEM || NUMA
> +	depends on NUMA
>  
>  #
>  # SPARSEMEM_EXTREME (which is the default) does some bootmem
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index aaa1655cf682..6fc22482eaa8 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -331,20 +331,7 @@ compound_page_dtor * const compound_page_dtors[NR_COMPOUND_DTORS] = {
>  
>  int min_free_kbytes = 1024;
>  int user_min_free_kbytes = -1;
> -#ifdef CONFIG_DISCONTIGMEM
> -/*
> - * DiscontigMem defines memory ranges as separate pg_data_t even if the ranges
> - * are not on separate NUMA nodes. Functionally this works but with
> - * watermark_boost_factor, it can reclaim prematurely as the ranges can be
> - * quite small. By default, do not boost watermarks on discontigmem as in
> - * many cases very high-order allocations like THP are likely to be
> - * unsupported and the premature reclaim offsets the advantage of long-term
> - * fragmentation avoidance.
> - */
> -int watermark_boost_factor __read_mostly;
> -#else
>  int watermark_boost_factor __read_mostly = 15000;
> -#endif
>  int watermark_scale_factor = 10;
>  
>  static unsigned long nr_kernel_pages __initdata;
> -- 
> 2.28.0
Mike Rapoport June 12, 2021, 5:43 a.m. UTC | #2
On Fri, Jun 11, 2021 at 01:53:48PM -0700, Stephen Brennan wrote:
> Mike Rapoport <rppt@kernel.org> writes:
> > From: Mike Rapoport <rppt@linux.ibm.com>
> >
> > There are no architectures that support DISCONTIGMEM left.
> >
> > Remove the configuration option and the dead code it was guarding in the
> > generic memory management code.
> >
> > Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> > ---
> >  include/asm-generic/memory_model.h | 37 ++++--------------------------
> >  include/linux/mmzone.h             |  8 ++++---
> >  mm/Kconfig                         | 25 +++-----------------
> >  mm/page_alloc.c                    | 13 -----------
> >  4 files changed, 12 insertions(+), 71 deletions(-)
> >
> > diff --git a/include/asm-generic/memory_model.h b/include/asm-generic/memory_model.h
> > index 7637fb46ba4f..a2c8ed60233a 100644
> > --- a/include/asm-generic/memory_model.h
> > +++ b/include/asm-generic/memory_model.h
> > @@ -6,47 +6,18 @@
> >  
> >  #ifndef __ASSEMBLY__
> >  
> > +/*
> > + * supports 3 memory models.
> > + */
> 
> This comment could either be updated to reflect 2 memory models, or
> removed entirely.

I counted SPARSE and SPARSE_VMEMMAP as 2.

The code below has three clauses: one for FLATMEM, one for SPARSE and one
for VMEMMAP.
 
> Thanks,
> Stephen
> 
> >  #if defined(CONFIG_FLATMEM)
> >  
> >  #ifndef ARCH_PFN_OFFSET
> >  #define ARCH_PFN_OFFSET		(0UL)
> >  #endif
> >  
> > -#elif defined(CONFIG_DISCONTIGMEM)
> > -
> > -#ifndef arch_pfn_to_nid
> > -#define arch_pfn_to_nid(pfn)	pfn_to_nid(pfn)
> > -#endif
> > -
> > -#ifndef arch_local_page_offset
> > -#define arch_local_page_offset(pfn, nid)	\
> > -	((pfn) - NODE_DATA(nid)->node_start_pfn)
> > -#endif
> > -
> > -#endif /* CONFIG_DISCONTIGMEM */
> > -
> > -/*
> > - * supports 3 memory models.
> > - */
> > -#if defined(CONFIG_FLATMEM)
> > -
> >  #define __pfn_to_page(pfn)	(mem_map + ((pfn) - ARCH_PFN_OFFSET))
> >  #define __page_to_pfn(page)	((unsigned long)((page) - mem_map) + \
> >  				 ARCH_PFN_OFFSET)
> > -#elif defined(CONFIG_DISCONTIGMEM)
> > -
> > -#define __pfn_to_page(pfn)			\
> > -({	unsigned long __pfn = (pfn);		\
> > -	unsigned long __nid = arch_pfn_to_nid(__pfn);  \
> > -	NODE_DATA(__nid)->node_mem_map + arch_local_page_offset(__pfn, __nid);\
> > -})
> > -
> > -#define __page_to_pfn(pg)						\
> > -({	const struct page *__pg = (pg);					\
> > -	struct pglist_data *__pgdat = NODE_DATA(page_to_nid(__pg));	\
> > -	(unsigned long)(__pg - __pgdat->node_mem_map) +			\
> > -	 __pgdat->node_start_pfn;					\
> > -})
> >  
> >  #elif defined(CONFIG_SPARSEMEM_VMEMMAP)
> >  
> > @@ -70,7 +41,7 @@
> >  	struct mem_section *__sec = __pfn_to_section(__pfn);	\
> >  	__section_mem_map_addr(__sec) + __pfn;		\
> >  })
> > -#endif /* CONFIG_FLATMEM/DISCONTIGMEM/SPARSEMEM */
> > +#endif /* CONFIG_FLATMEM/SPARSEMEM */
> >  
> >  /*
> >   * Convert a physical address to a Page Frame Number and back
> > diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
> > index 0d53eba1c383..700032e99419 100644
> > --- a/include/linux/mmzone.h
> > +++ b/include/linux/mmzone.h
> > @@ -738,10 +738,12 @@ struct zonelist {
> >  	struct zoneref _zonerefs[MAX_ZONES_PER_ZONELIST + 1];
> >  };
> >  
> > -#ifndef CONFIG_DISCONTIGMEM
> > -/* The array of struct pages - for discontigmem use pgdat->lmem_map */
> > +/*
> > + * The array of struct pages for flatmem.
> > + * It must be declared for SPARSEMEM as well because there are configurations
> > + * that rely on that.
> > + */
> >  extern struct page *mem_map;
> > -#endif
> >  
> >  #ifdef CONFIG_TRANSPARENT_HUGEPAGE
> >  struct deferred_split {
> > diff --git a/mm/Kconfig b/mm/Kconfig
> > index 02d44e3420f5..218b96ccc84a 100644
> > --- a/mm/Kconfig
> > +++ b/mm/Kconfig
> > @@ -19,7 +19,7 @@ choice
> >  
> >  config FLATMEM_MANUAL
> >  	bool "Flat Memory"
> > -	depends on !(ARCH_DISCONTIGMEM_ENABLE || ARCH_SPARSEMEM_ENABLE) || ARCH_FLATMEM_ENABLE
> > +	depends on !ARCH_SPARSEMEM_ENABLE || ARCH_FLATMEM_ENABLE
> >  	help
> >  	  This option is best suited for non-NUMA systems with
> >  	  flat address space. The FLATMEM is the most efficient
> > @@ -32,21 +32,6 @@ config FLATMEM_MANUAL
> >  
> >  	  If unsure, choose this option (Flat Memory) over any other.
> >  
> > -config DISCONTIGMEM_MANUAL
> > -	bool "Discontiguous Memory"
> > -	depends on ARCH_DISCONTIGMEM_ENABLE
> > -	help
> > -	  This option provides enhanced support for discontiguous
> > -	  memory systems, over FLATMEM.  These systems have holes
> > -	  in their physical address spaces, and this option provides
> > -	  more efficient handling of these holes.
> > -
> > -	  Although "Discontiguous Memory" is still used by several
> > -	  architectures, it is considered deprecated in favor of
> > -	  "Sparse Memory".
> > -
> > -	  If unsure, choose "Sparse Memory" over this option.
> > -
> >  config SPARSEMEM_MANUAL
> >  	bool "Sparse Memory"
> >  	depends on ARCH_SPARSEMEM_ENABLE
> > @@ -62,17 +47,13 @@ config SPARSEMEM_MANUAL
> >  
> >  endchoice
> >  
> > -config DISCONTIGMEM
> > -	def_bool y
> > -	depends on (!SELECT_MEMORY_MODEL && ARCH_DISCONTIGMEM_ENABLE) || DISCONTIGMEM_MANUAL
> > -
> >  config SPARSEMEM
> >  	def_bool y
> >  	depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL
> >  
> >  config FLATMEM
> >  	def_bool y
> > -	depends on (!DISCONTIGMEM && !SPARSEMEM) || FLATMEM_MANUAL
> > +	depends on !SPARSEMEM || FLATMEM_MANUAL
> >  
> >  config FLAT_NODE_MEM_MAP
> >  	def_bool y
> > @@ -85,7 +66,7 @@ config FLAT_NODE_MEM_MAP
> >  #
> >  config NEED_MULTIPLE_NODES
> >  	def_bool y
> > -	depends on DISCONTIGMEM || NUMA
> > +	depends on NUMA
> >  
> >  #
> >  # SPARSEMEM_EXTREME (which is the default) does some bootmem
> > diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> > index aaa1655cf682..6fc22482eaa8 100644
> > --- a/mm/page_alloc.c
> > +++ b/mm/page_alloc.c
> > @@ -331,20 +331,7 @@ compound_page_dtor * const compound_page_dtors[NR_COMPOUND_DTORS] = {
> >  
> >  int min_free_kbytes = 1024;
> >  int user_min_free_kbytes = -1;
> > -#ifdef CONFIG_DISCONTIGMEM
> > -/*
> > - * DiscontigMem defines memory ranges as separate pg_data_t even if the ranges
> > - * are not on separate NUMA nodes. Functionally this works but with
> > - * watermark_boost_factor, it can reclaim prematurely as the ranges can be
> > - * quite small. By default, do not boost watermarks on discontigmem as in
> > - * many cases very high-order allocations like THP are likely to be
> > - * unsupported and the premature reclaim offsets the advantage of long-term
> > - * fragmentation avoidance.
> > - */
> > -int watermark_boost_factor __read_mostly;
> > -#else
> >  int watermark_boost_factor __read_mostly = 15000;
> > -#endif
> >  int watermark_scale_factor = 10;
> >  
> >  static unsigned long nr_kernel_pages __initdata;
> > -- 
> > 2.28.0
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
diff mbox series

Patch

diff --git a/include/asm-generic/memory_model.h b/include/asm-generic/memory_model.h
index 7637fb46ba4f..a2c8ed60233a 100644
--- a/include/asm-generic/memory_model.h
+++ b/include/asm-generic/memory_model.h
@@ -6,47 +6,18 @@ 
 
 #ifndef __ASSEMBLY__
 
+/*
+ * supports 3 memory models.
+ */
 #if defined(CONFIG_FLATMEM)
 
 #ifndef ARCH_PFN_OFFSET
 #define ARCH_PFN_OFFSET		(0UL)
 #endif
 
-#elif defined(CONFIG_DISCONTIGMEM)
-
-#ifndef arch_pfn_to_nid
-#define arch_pfn_to_nid(pfn)	pfn_to_nid(pfn)
-#endif
-
-#ifndef arch_local_page_offset
-#define arch_local_page_offset(pfn, nid)	\
-	((pfn) - NODE_DATA(nid)->node_start_pfn)
-#endif
-
-#endif /* CONFIG_DISCONTIGMEM */
-
-/*
- * supports 3 memory models.
- */
-#if defined(CONFIG_FLATMEM)
-
 #define __pfn_to_page(pfn)	(mem_map + ((pfn) - ARCH_PFN_OFFSET))
 #define __page_to_pfn(page)	((unsigned long)((page) - mem_map) + \
 				 ARCH_PFN_OFFSET)
-#elif defined(CONFIG_DISCONTIGMEM)
-
-#define __pfn_to_page(pfn)			\
-({	unsigned long __pfn = (pfn);		\
-	unsigned long __nid = arch_pfn_to_nid(__pfn);  \
-	NODE_DATA(__nid)->node_mem_map + arch_local_page_offset(__pfn, __nid);\
-})
-
-#define __page_to_pfn(pg)						\
-({	const struct page *__pg = (pg);					\
-	struct pglist_data *__pgdat = NODE_DATA(page_to_nid(__pg));	\
-	(unsigned long)(__pg - __pgdat->node_mem_map) +			\
-	 __pgdat->node_start_pfn;					\
-})
 
 #elif defined(CONFIG_SPARSEMEM_VMEMMAP)
 
@@ -70,7 +41,7 @@ 
 	struct mem_section *__sec = __pfn_to_section(__pfn);	\
 	__section_mem_map_addr(__sec) + __pfn;		\
 })
-#endif /* CONFIG_FLATMEM/DISCONTIGMEM/SPARSEMEM */
+#endif /* CONFIG_FLATMEM/SPARSEMEM */
 
 /*
  * Convert a physical address to a Page Frame Number and back
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 0d53eba1c383..700032e99419 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -738,10 +738,12 @@  struct zonelist {
 	struct zoneref _zonerefs[MAX_ZONES_PER_ZONELIST + 1];
 };
 
-#ifndef CONFIG_DISCONTIGMEM
-/* The array of struct pages - for discontigmem use pgdat->lmem_map */
+/*
+ * The array of struct pages for flatmem.
+ * It must be declared for SPARSEMEM as well because there are configurations
+ * that rely on that.
+ */
 extern struct page *mem_map;
-#endif
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 struct deferred_split {
diff --git a/mm/Kconfig b/mm/Kconfig
index 02d44e3420f5..218b96ccc84a 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -19,7 +19,7 @@  choice
 
 config FLATMEM_MANUAL
 	bool "Flat Memory"
-	depends on !(ARCH_DISCONTIGMEM_ENABLE || ARCH_SPARSEMEM_ENABLE) || ARCH_FLATMEM_ENABLE
+	depends on !ARCH_SPARSEMEM_ENABLE || ARCH_FLATMEM_ENABLE
 	help
 	  This option is best suited for non-NUMA systems with
 	  flat address space. The FLATMEM is the most efficient
@@ -32,21 +32,6 @@  config FLATMEM_MANUAL
 
 	  If unsure, choose this option (Flat Memory) over any other.
 
-config DISCONTIGMEM_MANUAL
-	bool "Discontiguous Memory"
-	depends on ARCH_DISCONTIGMEM_ENABLE
-	help
-	  This option provides enhanced support for discontiguous
-	  memory systems, over FLATMEM.  These systems have holes
-	  in their physical address spaces, and this option provides
-	  more efficient handling of these holes.
-
-	  Although "Discontiguous Memory" is still used by several
-	  architectures, it is considered deprecated in favor of
-	  "Sparse Memory".
-
-	  If unsure, choose "Sparse Memory" over this option.
-
 config SPARSEMEM_MANUAL
 	bool "Sparse Memory"
 	depends on ARCH_SPARSEMEM_ENABLE
@@ -62,17 +47,13 @@  config SPARSEMEM_MANUAL
 
 endchoice
 
-config DISCONTIGMEM
-	def_bool y
-	depends on (!SELECT_MEMORY_MODEL && ARCH_DISCONTIGMEM_ENABLE) || DISCONTIGMEM_MANUAL
-
 config SPARSEMEM
 	def_bool y
 	depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL
 
 config FLATMEM
 	def_bool y
-	depends on (!DISCONTIGMEM && !SPARSEMEM) || FLATMEM_MANUAL
+	depends on !SPARSEMEM || FLATMEM_MANUAL
 
 config FLAT_NODE_MEM_MAP
 	def_bool y
@@ -85,7 +66,7 @@  config FLAT_NODE_MEM_MAP
 #
 config NEED_MULTIPLE_NODES
 	def_bool y
-	depends on DISCONTIGMEM || NUMA
+	depends on NUMA
 
 #
 # SPARSEMEM_EXTREME (which is the default) does some bootmem
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index aaa1655cf682..6fc22482eaa8 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -331,20 +331,7 @@  compound_page_dtor * const compound_page_dtors[NR_COMPOUND_DTORS] = {
 
 int min_free_kbytes = 1024;
 int user_min_free_kbytes = -1;
-#ifdef CONFIG_DISCONTIGMEM
-/*
- * DiscontigMem defines memory ranges as separate pg_data_t even if the ranges
- * are not on separate NUMA nodes. Functionally this works but with
- * watermark_boost_factor, it can reclaim prematurely as the ranges can be
- * quite small. By default, do not boost watermarks on discontigmem as in
- * many cases very high-order allocations like THP are likely to be
- * unsupported and the premature reclaim offsets the advantage of long-term
- * fragmentation avoidance.
- */
-int watermark_boost_factor __read_mostly;
-#else
 int watermark_boost_factor __read_mostly = 15000;
-#endif
 int watermark_scale_factor = 10;
 
 static unsigned long nr_kernel_pages __initdata;