diff mbox series

[v2,08/44] cpuidle,imx6: Push RCU-idle into driver

Message ID 20220919101520.869531945@infradead.org (mailing list archive)
State New, archived
Headers show
Series cpuidle,rcu: Clean up the mess | expand

Commit Message

Peter Zijlstra Sept. 19, 2022, 9:59 a.m. UTC
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is daft.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
 arch/arm/mach-imx/cpuidle-imx6sx.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Comments

Frederic Weisbecker Sept. 19, 2022, 2:21 p.m. UTC | #1
On Mon, Sep 19, 2022 at 11:59:47AM +0200, Peter Zijlstra wrote:
> Doing RCU-idle outside the driver, only to then temporarily enable it
> again, at least twice, before going idle is daft.

Hmm, what ends up calling RCU_IDLE() here? Also what about
cpu_do_idle()?

Thanks.

> 
> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> ---
>  arch/arm/mach-imx/cpuidle-imx6sx.c |    5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> --- a/arch/arm/mach-imx/cpuidle-imx6sx.c
> +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
> @@ -47,7 +47,9 @@ static int imx6sx_enter_wait(struct cpui
>  		cpu_pm_enter();
>  		cpu_cluster_pm_enter();
>  
> +		ct_idle_enter();
>  		cpu_suspend(0, imx6sx_idle_finish);
> +		ct_idle_exit();
>  
>  		cpu_cluster_pm_exit();
>  		cpu_pm_exit();
> @@ -87,7 +89,8 @@ static struct cpuidle_driver imx6sx_cpui
>  			 */
>  			.exit_latency = 300,
>  			.target_residency = 500,
> -			.flags = CPUIDLE_FLAG_TIMER_STOP,
> +			.flags = CPUIDLE_FLAG_TIMER_STOP |
> +				 CPUIDLE_FLAG_RCU_IDLE,
>  			.enter = imx6sx_enter_wait,
>  			.name = "LOW-POWER-IDLE",
>  			.desc = "ARM power off",
> 
>
Frederic Weisbecker Sept. 19, 2022, 2:49 p.m. UTC | #2
On Mon, Sep 19, 2022 at 11:59:47AM +0200, Peter Zijlstra wrote:
> Doing RCU-idle outside the driver, only to then temporarily enable it
> again, at least twice, before going idle is daft.
> 
> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> ---
>  arch/arm/mach-imx/cpuidle-imx6sx.c |    5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> --- a/arch/arm/mach-imx/cpuidle-imx6sx.c
> +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
> @@ -47,7 +47,9 @@ static int imx6sx_enter_wait(struct cpui
>  		cpu_pm_enter();
>  		cpu_cluster_pm_enter();
>  
> +		ct_idle_enter();
>  		cpu_suspend(0, imx6sx_idle_finish);
> +		ct_idle_exit();
>  
>  		cpu_cluster_pm_exit();
>  		cpu_pm_exit();
> @@ -87,7 +89,8 @@ static struct cpuidle_driver imx6sx_cpui
>  			 */
>  			.exit_latency = 300,
>  			.target_residency = 500,
> -			.flags = CPUIDLE_FLAG_TIMER_STOP,
> +			.flags = CPUIDLE_FLAG_TIMER_STOP |
> +				 CPUIDLE_FLAG_RCU_IDLE,
>  			.enter = imx6sx_enter_wait,

There is a second one below that also uses imx6sx_enter_wait.

Thanks.

>  			.name = "LOW-POWER-IDLE",
>  			.desc = "ARM power off",
> 
>
Peter Zijlstra Sept. 19, 2022, 3 p.m. UTC | #3
On Mon, Sep 19, 2022 at 04:21:23PM +0200, Frederic Weisbecker wrote:
> On Mon, Sep 19, 2022 at 11:59:47AM +0200, Peter Zijlstra wrote:
> > Doing RCU-idle outside the driver, only to then temporarily enable it
> > again, at least twice, before going idle is daft.
> 
> Hmm, what ends up calling RCU_IDLE() here? Also what about
> cpu_do_idle()?

Both cpu_pm_enter() and cpu_cluster_pm_enter() use ct_irq_enter_irqson()
which is another way to spell RCU_NONIDLE().
Peter Zijlstra Sept. 19, 2022, 3:01 p.m. UTC | #4
On Mon, Sep 19, 2022 at 04:49:41PM +0200, Frederic Weisbecker wrote:
> On Mon, Sep 19, 2022 at 11:59:47AM +0200, Peter Zijlstra wrote:
> > Doing RCU-idle outside the driver, only to then temporarily enable it
> > again, at least twice, before going idle is daft.
> > 
> > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> > ---
> >  arch/arm/mach-imx/cpuidle-imx6sx.c |    5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> > 
> > --- a/arch/arm/mach-imx/cpuidle-imx6sx.c
> > +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
> > @@ -47,7 +47,9 @@ static int imx6sx_enter_wait(struct cpui
> >  		cpu_pm_enter();
> >  		cpu_cluster_pm_enter();
> >  
> > +		ct_idle_enter();
> >  		cpu_suspend(0, imx6sx_idle_finish);
> > +		ct_idle_exit();
> >  
> >  		cpu_cluster_pm_exit();
> >  		cpu_pm_exit();
> > @@ -87,7 +89,8 @@ static struct cpuidle_driver imx6sx_cpui
> >  			 */
> >  			.exit_latency = 300,
> >  			.target_residency = 500,
> > -			.flags = CPUIDLE_FLAG_TIMER_STOP,
> > +			.flags = CPUIDLE_FLAG_TIMER_STOP |
> > +				 CPUIDLE_FLAG_RCU_IDLE,
> >  			.enter = imx6sx_enter_wait,
> 
> There is a second one below that also uses imx6sx_enter_wait.

Duh, thanks!
Peter Zijlstra Sept. 19, 2022, 3:03 p.m. UTC | #5
On Mon, Sep 19, 2022 at 04:49:41PM +0200, Frederic Weisbecker wrote:
> On Mon, Sep 19, 2022 at 11:59:47AM +0200, Peter Zijlstra wrote:
> > Doing RCU-idle outside the driver, only to then temporarily enable it
> > again, at least twice, before going idle is daft.
> > 
> > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> > ---
> >  arch/arm/mach-imx/cpuidle-imx6sx.c |    5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> > 
> > --- a/arch/arm/mach-imx/cpuidle-imx6sx.c
> > +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
> > @@ -47,7 +47,9 @@ static int imx6sx_enter_wait(struct cpui
> >  		cpu_pm_enter();
> >  		cpu_cluster_pm_enter();
> >  
> > +		ct_idle_enter();
> >  		cpu_suspend(0, imx6sx_idle_finish);
> > +		ct_idle_exit();
> >  
> >  		cpu_cluster_pm_exit();
> >  		cpu_pm_exit();
> > @@ -87,7 +89,8 @@ static struct cpuidle_driver imx6sx_cpui
> >  			 */
> >  			.exit_latency = 300,
> >  			.target_residency = 500,
> > -			.flags = CPUIDLE_FLAG_TIMER_STOP,
> > +			.flags = CPUIDLE_FLAG_TIMER_STOP |
> > +				 CPUIDLE_FLAG_RCU_IDLE,
> >  			.enter = imx6sx_enter_wait,
> 
> There is a second one below that also uses imx6sx_enter_wait.

Oh, above you mean; but only @index==2 gets us into the whole PM crud.
@index==1 is fine afaict.
Frederic Weisbecker Sept. 19, 2022, 3:17 p.m. UTC | #6
On Mon, Sep 19, 2022 at 05:03:04PM +0200, Peter Zijlstra wrote:
> On Mon, Sep 19, 2022 at 04:49:41PM +0200, Frederic Weisbecker wrote:
> > On Mon, Sep 19, 2022 at 11:59:47AM +0200, Peter Zijlstra wrote:
> > > Doing RCU-idle outside the driver, only to then temporarily enable it
> > > again, at least twice, before going idle is daft.
> > > 
> > > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> > > ---
> > >  arch/arm/mach-imx/cpuidle-imx6sx.c |    5 ++++-
> > >  1 file changed, 4 insertions(+), 1 deletion(-)
> > > 
> > > --- a/arch/arm/mach-imx/cpuidle-imx6sx.c
> > > +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
> > > @@ -47,7 +47,9 @@ static int imx6sx_enter_wait(struct cpui
> > >  		cpu_pm_enter();
> > >  		cpu_cluster_pm_enter();
> > >  
> > > +		ct_idle_enter();
> > >  		cpu_suspend(0, imx6sx_idle_finish);
> > > +		ct_idle_exit();
> > >  
> > >  		cpu_cluster_pm_exit();
> > >  		cpu_pm_exit();
> > > @@ -87,7 +89,8 @@ static struct cpuidle_driver imx6sx_cpui
> > >  			 */
> > >  			.exit_latency = 300,
> > >  			.target_residency = 500,
> > > -			.flags = CPUIDLE_FLAG_TIMER_STOP,
> > > +			.flags = CPUIDLE_FLAG_TIMER_STOP |
> > > +				 CPUIDLE_FLAG_RCU_IDLE,
> > >  			.enter = imx6sx_enter_wait,
> > 
> > There is a second one below that also uses imx6sx_enter_wait.
> 
> Oh, above you mean; but only @index==2 gets us into the whole PM crud.
> @index==1 is fine afaict.

Ah ok, got it, hence why you didn't touch cpu_do_idle()...
May need to comment that somewhere...

Reviewed-by: Frederic Weisbecker <frederic@kernel.org>

Thanks!
Peter Zijlstra Sept. 20, 2022, 8:58 a.m. UTC | #7
On Mon, Sep 19, 2022 at 04:21:23PM +0200, Frederic Weisbecker wrote:
> On Mon, Sep 19, 2022 at 11:59:47AM +0200, Peter Zijlstra wrote:
> > Doing RCU-idle outside the driver, only to then temporarily enable it
> > again, at least twice, before going idle is daft.
> 
> Hmm, what ends up calling RCU_IDLE() here? Also what about
> cpu_do_idle()?

I've ammended patches 5-12 with a comment like:

Notably both cpu_pm_enter() and cpu_cluster_pm_enter() implicity
re-enable RCU.

(each noting the specific sites for the relevant patch).
Frederic Weisbecker Sept. 20, 2022, 9:01 a.m. UTC | #8
On Tue, Sep 20, 2022 at 10:58:59AM +0200, Peter Zijlstra wrote:
> On Mon, Sep 19, 2022 at 04:21:23PM +0200, Frederic Weisbecker wrote:
> > On Mon, Sep 19, 2022 at 11:59:47AM +0200, Peter Zijlstra wrote:
> > > Doing RCU-idle outside the driver, only to then temporarily enable it
> > > again, at least twice, before going idle is daft.
> > 
> > Hmm, what ends up calling RCU_IDLE() here? Also what about
> > cpu_do_idle()?
> 
> I've ammended patches 5-12 with a comment like:
> 
> Notably both cpu_pm_enter() and cpu_cluster_pm_enter() implicity
> re-enable RCU.
> 
> (each noting the specific sites for the relevant patch).

Thanks!
diff mbox series

Patch

--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@@ -47,7 +47,9 @@  static int imx6sx_enter_wait(struct cpui
 		cpu_pm_enter();
 		cpu_cluster_pm_enter();
 
+		ct_idle_enter();
 		cpu_suspend(0, imx6sx_idle_finish);
+		ct_idle_exit();
 
 		cpu_cluster_pm_exit();
 		cpu_pm_exit();
@@ -87,7 +89,8 @@  static struct cpuidle_driver imx6sx_cpui
 			 */
 			.exit_latency = 300,
 			.target_residency = 500,
-			.flags = CPUIDLE_FLAG_TIMER_STOP,
+			.flags = CPUIDLE_FLAG_TIMER_STOP |
+				 CPUIDLE_FLAG_RCU_IDLE,
 			.enter = imx6sx_enter_wait,
 			.name = "LOW-POWER-IDLE",
 			.desc = "ARM power off",