===================================================================
@@ -17,7 +17,8 @@ Required Properties:
to the USB_EXTAL clock
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "main",
- "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", and "rcan"
+ "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
+ "adsp"
Example
@@ -31,5 +32,5 @@ Example
#clock-cells = <1>;
clock-output-names = "main", "pll0, "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "sd1", "z",
- "rcan";
+ "rcan", "adsp";
};
===================================================================
@@ -33,6 +33,7 @@ struct rcar_gen2_cpg {
#define CPG_FRQCRC 0x000000e0
#define CPG_FRQCRC_ZFC_MASK (0x1f << 8)
#define CPG_FRQCRC_ZFC_SHIFT 8
+#define CPG_ADSPCKCR 0x0000025c
#define CPG_RCANCKCR 0x00000270
/* -----------------------------------------------------------------------------
@@ -199,6 +200,51 @@ static struct clk * __init cpg_rcan_clk_
return clk;
}
+/* ADSP divisors */
+static const struct clk_div_table cpg_adsp_div_table[] = {
+ { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 },
+ { 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 },
+ { 10, 36 }, { 11, 48 }, { 0, 0 },
+};
+
+static struct clk * __init cpg_adsp_clk_register(struct rcar_gen2_cpg *cpg)
+{
+ const char *parent_name = "pll1";
+ struct clk_divider *div;
+ struct clk_gate *gate;
+ struct clk *clk;
+
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ div->reg = cpg->reg + CPG_ADSPCKCR;
+ div->width = 4;
+ div->table = cpg_adsp_div_table;
+ div->lock = &cpg->lock;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate) {
+ kfree(div);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ gate->reg = cpg->reg + CPG_ADSPCKCR;
+ gate->bit_idx = 8;
+ gate->flags = CLK_GATE_SET_TO_DISABLE;
+ gate->lock = &cpg->lock;
+
+ clk = clk_register_composite(NULL, "adsp", &parent_name, 1, NULL, NULL,
+ &div->hw, &clk_divider_ops,
+ &gate->hw, &clk_gate_ops, 0);
+ if (IS_ERR(clk)) {
+ kfree(gate);
+ kfree(div);
+ }
+
+ return clk;
+}
+
/* -----------------------------------------------------------------------------
* CPG Clock Data
*/
@@ -303,6 +349,8 @@ rcar_gen2_cpg_register_clock(struct devi
return cpg_z_clk_register(cpg);
} else if (!strcmp(name, "rcan")) {
return cpg_rcan_clk_register(cpg, np);
+ } else if (!strcmp(name, "adsp")) {
+ return cpg_adsp_clk_register(cpg);
} else {
return ERR_PTR(-EINVAL);
}
Add the ADSP clock support to the R-Car generation 2 CPG driver. This clock gets derived from PLL1. The layout of the ADSPCKCR register is similar to those of the clocks supported by the 'clk-div6' driver but the divider encoding is non-linear, so can't be supported by that driver... Based on the original patch by Konstantin Kozhevnikov <konstantin.kozhevnikov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- Re-sending with the correct version tag... The patch is against the 'clk-next' branch of Mike Turquette's 'linux.git' repo plus the RCAN clock support patch reposted yesterday. Changes in version 3: - fixed the gated clock register address in cpg_adsp_clk_register(); - moved cpg_adsp_clk_register() and cpg_adsp_div_table[] to be after cpg_rcan_clk_register(); - moved cpg_adsp_clk_register() call after cpg_rcan_clk_register() call; - refreshed the patch. Changes in version 2: - swapped "adsp" and "rcan" in the binding document. Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt | 5 - drivers/clk/shmobile/clk-rcar-gen2.c | 48 ++++++++++ 2 files changed, 51 insertions(+), 2 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html