diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
index 3a2adb131d46..cb3e7e3b5027 100644
--- a/drivers/dma/sh/shdma-base.c
+++ b/drivers/dma/sh/shdma-base.c
@@ -171,8 +171,7 @@ static struct shdma_desc *shdma_get_desc(struct shdma_chan *schan)
 	return NULL;
 }
 
-static int shdma_setup_slave(struct shdma_chan *schan, int slave_id,
-			     dma_addr_t slave_addr)
+static int shdma_setup_slave(struct shdma_chan *schan, dma_addr_t slave_addr)
 {
 	struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
 	const struct shdma_ops *ops = sdev->ops;
@@ -183,25 +182,23 @@ static int shdma_setup_slave(struct shdma_chan *schan, int slave_id,
 		ret = ops->set_slave(schan, match, slave_addr, true);
 		if (ret < 0)
 			return ret;
-
-		slave_id = schan->slave_id;
 	} else {
-		match = slave_id;
+		match = schan->real_slave_id;
 	}
 
-	if (slave_id < 0 || slave_id >= slave_num)
+	if (schan->real_slave_id < 0 || schan->real_slave_id >= slave_num)
 		return -EINVAL;
 
-	if (test_and_set_bit(slave_id, shdma_slave_used))
+	if (test_and_set_bit(schan->real_slave_id, shdma_slave_used))
 		return -EBUSY;
 
 	ret = ops->set_slave(schan, match, slave_addr, false);
 	if (ret < 0) {
-		clear_bit(slave_id, shdma_slave_used);
+		clear_bit(schan->real_slave_id, shdma_slave_used);
 		return ret;
 	}
 
-	schan->slave_id = slave_id;
+	schan->slave_id = schan->real_slave_id;
 
 	return 0;
 }
@@ -221,10 +218,12 @@ static int shdma_alloc_chan_resources(struct dma_chan *chan)
 	 */
 	if (slave) {
 		/* Legacy mode: .private is set in filter */
-		ret = shdma_setup_slave(schan, slave->slave_id, 0);
+		schan->real_slave_id = slave->slave_id;
+		ret = shdma_setup_slave(schan, 0);
 		if (ret < 0)
 			goto esetslave;
 	} else {
+		/* Normal mode: real_slave_id was set by filter */
 		schan->slave_id = -EINVAL;
 	}
 
@@ -258,11 +257,14 @@ esetslave:
 
 /*
  * This is the standard shdma filter function to be used as a replacement to the
- * "old" method, using the .private pointer. If for some reason you allocate a
- * channel without slave data, use something like ERR_PTR(-EINVAL) as a filter
+ * "old" method, using the .private pointer.
+ * You always have to pass a valid slave id as the argument, old drivers that
+ * pass ERR_PTR(-EINVAL) as a filter parameter and set it up in dma_slave_config
+ * need to be updated so we can remove the slave_id field from dma_slave_config.
  * parameter. If this filter is used, the slave driver, after calling
  * dma_request_channel(), will also have to call dmaengine_slave_config() with
- * .slave_id, .direction, and either .src_addr or .dst_addr set.
+ * .direction, and either .src_addr or .dst_addr set.
+ *
  * NOTE: this filter doesn't support multiple DMAC drivers with the DMA_SLAVE
  * capability! If this becomes a requirement, hardware glue drivers, using this
  * services would have to provide their own filters, which first would check
@@ -276,7 +278,7 @@ bool shdma_chan_filter(struct dma_chan *chan, void *arg)
 {
 	struct shdma_chan *schan;
 	struct shdma_dev *sdev;
-	int match = (long)arg;
+	int slave_id = (long)arg;
 	int ret;
 
 	/* Only support channels handled by this driver. */
@@ -284,16 +286,35 @@ bool shdma_chan_filter(struct dma_chan *chan, void *arg)
 	    shdma_alloc_chan_resources)
 		return false;
 
-	if (match < 0)
+	schan = to_shdma_chan(chan);
+	sdev = to_shdma_dev(chan->device);
+
+	/*
+	 * For DT, the schan->slave_id field is generated by the
+	 * set_slave function from the slave ID that is passed in
+	 * from xlate. For the non-DT case, the slave ID is
+	 * directly passed into the filter function by the driver
+	 */
+	if (schan->dev->of_node) {
+		ret = sdev->ops->set_slave(schan, slave_id, 0, true);
+		if (ret < 0)
+			return false;
+
+		schan->real_slave_id = schan->slave_id;
+		return true;
+	}
+
+	if (slave_id < 0) {
 		/* No slave requested - arbitrary channel */
+		dev_warn(sdev->dma_dev.dev, "invalid slave ID passed to dma_request_slave\n");
 		return true;
+	}
 
-	schan = to_shdma_chan(chan);
-	if (!schan->dev->of_node && match >= slave_num)
+	if (slave_id >= slave_num)
 		return false;
 
-	sdev = to_shdma_dev(schan->dma_chan.device);
-	ret = sdev->ops->set_slave(schan, match, 0, true);
+	ret = sdev->ops->set_slave(schan, schan->real_slave_id, 0, true);
+	schan->real_slave_id = slave_id;
 	if (ret < 0)
 		return false;
 
@@ -452,6 +473,8 @@ static void shdma_free_chan_resources(struct dma_chan *chan)
 		chan->private = NULL;
 	}
 
+	schan->real_slave_id = 0;
+
 	spin_lock_irq(&schan->chan_lock);
 
 	list_splice_init(&schan->ld_free, &list);
@@ -767,7 +790,14 @@ static int shdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		 * channel, while using it...
 		 */
 		config = (struct dma_slave_config *)arg;
-		ret = shdma_setup_slave(schan, config->slave_id,
+
+		/* overriding the slave_id through dma_slave_config is deprecated,
+		 * but possibly some out-of-tree drivers still do it. */
+		if (WARN_ON_ONCE(config->slave_id &&
+		    config->slave_id != schan->real_slave_id))
+			schan->real_slave_id = config->slave_id;
+
+		ret = shdma_setup_slave(schan,
 					config->direction == DMA_DEV_TO_MEM ?
 					config->src_addr : config->dst_addr);
 		if (ret < 0)
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 7d9d6a321521..df3a537f5a83 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -388,7 +388,7 @@ sh_mmcif_request_dma_one(struct sh_mmcif_host *host,
 {
 	struct dma_slave_config cfg = { 0, };
 	struct dma_chan *chan;
-	unsigned int slave_id;
+	void *slave_data;
 	struct resource *res;
 	dma_cap_mask_t mask;
 	int ret;
@@ -414,8 +414,6 @@ sh_mmcif_request_dma_one(struct sh_mmcif_host *host,
 
 	res = platform_get_resource(host->pd, IORESOURCE_MEM, 0);
 
-	/* In the OF case the driver will get the slave ID from the DT */
-	cfg.slave_id = slave_id;
 	cfg.direction = direction;
 
 	if (direction == DMA_DEV_TO_MEM) {
diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c
index 7d077388b9eb..2ba47ab689ff 100644
--- a/drivers/mmc/host/tmio_mmc_dma.c
+++ b/drivers/mmc/host/tmio_mmc_dma.c
@@ -288,8 +288,6 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat
 		if (!host->chan_tx)
 			return;
 
-		if (pdata->dma->chan_priv_tx)
-			cfg.slave_id = pdata->dma->slave_id_tx;
 		cfg.direction = DMA_MEM_TO_DEV;
 		cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->pdata->bus_shift);
 		cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
@@ -307,8 +305,6 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat
 		if (!host->chan_rx)
 			goto ereqrx;
 
-		if (pdata->dma->chan_priv_rx)
-			cfg.slave_id = pdata->dma->slave_id_rx;
 		cfg.direction = DMA_DEV_TO_MEM;
 		cfg.src_addr = cfg.dst_addr + pdata->dma->dma_rx_offset;
 		cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index a21c378f096a..c3ce81c1a716 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -159,7 +159,6 @@ static void flctl_setup_dma(struct sh_flctl *flctl)
 		return;
 
 	memset(&cfg, 0, sizeof(cfg));
-	cfg.slave_id = pdata->slave_id_fifo0_tx;
 	cfg.direction = DMA_MEM_TO_DEV;
 	cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl);
 	cfg.src_addr = 0;
@@ -175,7 +174,6 @@ static void flctl_setup_dma(struct sh_flctl *flctl)
 	if (!flctl->chan_fifo0_rx)
 		goto err;
 
-	cfg.slave_id = pdata->slave_id_fifo0_rx;
 	cfg.direction = DMA_DEV_TO_MEM;
 	cfg.dst_addr = 0;
 	cfg.src_addr = (dma_addr_t)FLDTFIFO(flctl);
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 2071f788c6fb..6cbcdc04c947 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -918,7 +918,6 @@ static struct dma_chan *rspi_request_dma_chan(struct device *dev,
 	}
 
 	memset(&cfg, 0, sizeof(cfg));
-	cfg.slave_id = id;
 	cfg.direction = dir;
 	if (dir == DMA_MEM_TO_DEV) {
 		cfg.dst_addr = port_addr;
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 239be7cbe5a8..786ac9ec11fc 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -984,7 +984,6 @@ static struct dma_chan *sh_msiof_request_dma_chan(struct device *dev,
 	}
 
 	memset(&cfg, 0, sizeof(cfg));
-	cfg.slave_id = id;
 	cfg.direction = dir;
 	if (dir == DMA_MEM_TO_DEV) {
 		cfg.dst_addr = port_addr;
diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h
index abdf1f229dc3..dd0ba502ccb3 100644
--- a/include/linux/shdma-base.h
+++ b/include/linux/shdma-base.h
@@ -69,6 +69,7 @@ struct shdma_chan {
 	int id;				/* Raw id of this channel */
 	int irq;			/* Channel IRQ */
 	int slave_id;			/* Client ID for slave DMA */
+	int real_slave_id;		/* argument passed to filter function */
 	int hw_req;			/* DMA request line for slave DMA - same
 					 * as MID/RID, used with DT */
 	enum shdma_pm_state pm_state;
