diff mbox

[22/28] ARM: shmobile: r8a7794: add USB PHY DT support

Message ID 74ef4572004fc2abf5951a07aab36600a17b3a48.1444182812.git.horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit 74ef4572004fc2abf5951a07aab36600a17b3a48
Headers show

Commit Message

Simon Horman Oct. 7, 2015, 1:57 a.m. UTC
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Define the R8A7794 generic part of the USB PHY device node. It is up to the
board file to enable the device.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index a0747d749bb1..6ba0fa4890d0 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -690,6 +690,26 @@ 
 				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	usbphy: usb-phy@e6590100 {
+		compatible = "renesas,usb-phy-r8a7794";
+		reg = <0 0xe6590100 0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+		clock-names = "usbhs";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+
+		usb0: usb-channel@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+		usb2: usb-channel@2 {
+			reg = <2>;
+			#phy-cells = <1>;
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;