diff mbox

[13/17] ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts

Message ID 96bd6f67f027383ae1e876157f229ac9e87d790e.1421371996.git.horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit 682d2dfb1d54b3b8d4409cc80c0a73e965c943a3
Headers show

Commit Message

Simon Horman Jan. 16, 2015, 2:35 a.m. UTC 
From: Magnus Damm <damm+renesas@opensource.se>

Sync the two DTS for the KZM9G board. The target is the file
"sh73a0-kzm9g.dts" and it is made identical to the DT reference
case with the exception of the compatbile string. In the future
the DT reference file will go away.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[geert: Update for recent changes to sh73a0-kzm9g-reference.dts]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g.dts | 374 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 373 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index e7dae01..6f00e6b 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -1,6 +1,9 @@ 
 /*
  * Device Tree Source for the KZM-A9-GT board
  *
+ * Copyright (C) 2012 Horms Solutions Ltd.
+ *
+ * Based on sh73a0-kzm9g.dts
  * Copyright (C) 2012 Renesas Solutions Corp.
  *
  * This file is licensed under the terms of the GNU General Public License
@@ -10,17 +13,386 @@ 
 
 /dts-v1/;
 #include "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "KZM-A9-GT";
 	compatible = "renesas,kzm9g", "renesas,sh73a0";
 
+	aliases {
+		serial4 = &scifa4;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd_dvfs>;
+			operating-points = <
+				/* kHz  uV */
+				1196000 1315000
+				 598000 1175000
+				 398667 1065000
+			>;
+			voltage-tolerance = <1>; /* 1% */
+		};
+	};
+
 	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
+		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
+		stdout-path = &scifa4;
 	};
 
 	memory {
 		device_type = "memory";
 		reg = <0x40000000 0x20000000>;
 	};
+
+	reg_1p8v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vmmc_sdhi0: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vmmc_sdhi2: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lan9220@10000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x10000000 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin0>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		reg-io-width = <4>;
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+			label = "LED1";
+		};
+		led2 {
+			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+			label = "LED2";
+		};
+		led3 {
+			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+			label = "LED3";
+		};
+		led4 {
+			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+			label = "LED4";
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		back-key {
+			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "SW3";
+		};
+
+		right-key {
+			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHT>;
+			label = "SW2-R";
+		};
+
+		left-key {
+			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFT>;
+			label = "SW2-L";
+		};
+
+		enter-key {
+			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			label = "SW2-P";
+		};
+
+		up-key {
+			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+			label = "SW2-U";
+		};
+
+		down-key {
+			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+			label = "SW2-D";
+		};
+
+		home-key {
+			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "SW1";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "left_j";
+		simple-audio-card,cpu {
+			sound-dai = <&sh_fsi2 0>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&ak4648>;
+			bitclock-master;
+			frame-master;
+			system-clock-frequency = <11289600>;
+		};
+	};
+};
+
+&cmt1 {
+	status = "okay";
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	compass@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+		interrupt-parent = <&irqpin3>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	ak4648: codec@12 {
+		compatible = "asahi-kasei,ak4648";
+		reg = <0x12>;
+		#sound-dai-cells = <0>;
+	};
+
+	accelerometer@1d {
+		compatible = "adi,adxl34x";
+		reg = <0x1d>;
+		interrupt-parent = <&irqpin3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+			     <3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rtc@32 {
+		compatible = "ricoh,r2025sd";
+		reg = <0x32>;
+	};
+
+	as3711@40 {
+		compatible = "ams,as3711";
+		reg = <0x40>;
+
+		regulators {
+			vdd_dvfs: sd1 {
+				regulator-name = "1.315V CPU";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			sd2 {
+				regulator-name = "1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			sd4 {
+				regulator-name = "1.215V";
+				regulator-min-microvolt = <1215000>;
+				regulator-max-microvolt = <1235000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo2 {
+				regulator-name = "2.8V CPU";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo3 {
+				regulator-name = "3.0V CPU";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo4 {
+				regulator-name = "2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo5 {
+				regulator-name = "2.8V #2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo7 {
+				regulator-name = "1.15V CPU";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo8 {
+				regulator-name = "1.15V CPU #2";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	touchscreen@55 {
+		compatible = "sitronix,st1232";
+		reg = <0x55>;
+		interrupt-parent = <&irqpin1>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcf8575: gpio@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		interrupt-parent = <&irqpin2>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mmcif {
+	pinctrl-0 = <&mmcif_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	vmmc-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&pfc {
+	i2c3_pins: i2c3 {
+		renesas,groups = "i2c3_1";
+		renesas,function = "i2c3";
+	};
+
+	mmcif_pins: mmc {
+		mux {
+			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+			renesas,function = "mmc0";
+		};
+		cfg {
+			renesas,groups = "mmc0_data8_0";
+			renesas,pins = "PORT279";
+			bias-pull-up;
+		};
+	};
+
+	scifa4_pins: serial4 {
+		renesas,groups = "scifa4_data", "scifa4_ctrl";
+		renesas,function = "scifa4";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
+	fsia_pins: sounda {
+		renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
+				 "fsia_data_in", "fsia_data_out";
+		renesas,function = "fsia";
+	};
+};
+
+&scifa4 {
+	pinctrl-0 = <&scifa4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi2>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&sh_fsi2 {
+	pinctrl-0 = <&fsia_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
 };