@@ -54,9 +54,11 @@ static LIST_HEAD(sh_dmae_devices);
static void channel_clear(struct sh_dmae_chan *sh_dc)
{
struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
+ const struct sh_dmae_channel *chan_pdata = shdev->pdata->channel +
+ sh_dc->shdma_chan.id;
+ u32 val = chan_pdata->chclr_bit < 0 ? 0 : 1 << chan_pdata->chclr_bit;
- __raw_writel(0, shdev->chan_reg +
- shdev->pdata->channel[sh_dc->shdma_chan.id].chclr_offset);
+ __raw_writel(val, shdev->chan_reg + chan_pdata->chclr_offset);
}
static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg)
@@ -33,11 +33,21 @@ struct sh_dmae_slave_config {
char mid_rid;
};
+/**
+ * struct sh_dmae_channel - DMAC channel platform data
+ * @offset: register offset within the main IOMEM resource
+ * @dmars: channel DMARS register offset
+ * @chclr_offset: channel CHCLR register offset
+ * @dmars_bit: channel DMARS field offset within the register
+ * @chclr_bit: > 0: bit position, to be set to reset the channel
+ * < 0: CHCLR has to be cleared to clear channel's buffers
+ */
struct sh_dmae_channel {
unsigned int offset;
unsigned int dmars;
- unsigned int dmars_bit;
unsigned int chclr_offset;
+ unsigned char dmars_bit;
+ signed char chclr_bit;
};
struct sh_dmae_pdata {
On newer r-car SoCs the CHCLR register only contains one bit per channel, to which a 1 has to be written to reset the channel. Older SoC versions had one CHCLR register per channel, to which a 0 must be written to reset the channel and clear its buffers. This patch adds support for the newer layout. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> --- drivers/dma/sh/shdma.c | 6 ++++-- include/linux/sh_dma.h | 12 +++++++++++- 2 files changed, 15 insertions(+), 3 deletions(-)