diff mbox

[27/32] ARM: shmobile: r8a7791: add CAN clocks

Message ID b324252cc18d52d5752942a8574c22229153c58f.1424849129.git.horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit b324252cc18d52d5752942a8574c22229153c58f
Headers show

Commit Message

Simon Horman Feb. 26, 2015, 6:21 a.m. UTC
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock (clkp2)
and external clock fed on CAN_CLK pin.  Describe those clocks in the device
tree,  along with  the USB_EXTAL clock  from which clkp2 is derived.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi            | 23 +++++++++++++++++++++--
 include/dt-bindings/clock/r8a7791-clock.h |  1 +
 2 files changed, 22 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index afba8af..1ebffef 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -862,15 +862,34 @@ 
 			status = "disabled";
 		};
 
+		/* External USB clock - can be overridden by the board */
+		usb_extal_clk: usb_extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+			clock-output-names = "usb_extal";
+		};
+
+		/* External CAN clock */
+		can_clk: can_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "can_clk";
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7791-cpg-clocks",
 				     "renesas,rcar-gen2-cpg-clocks";
 			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
+			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "z";
+					     "lb", "qspi", "sdh", "sd0", "z",
+					     "rcan";
 		};
 
 		/* Variable factor clocks */
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index f096f3f..a45a363 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -20,6 +20,7 @@ 
 #define R8A7791_CLK_SDH			6
 #define R8A7791_CLK_SD0			7
 #define R8A7791_CLK_Z			8
+#define R8A7791_CLK_RCAN		9
 
 /* MSTP0 */
 #define R8A7791_CLK_MSIOF0		0