diff mbox

ms7724se: add 1280x720 lcdc output support

Message ID u8wi1ts7g.wl%morimoto.kuninori@renesas.com (mailing list archive)
State Accepted
Headers show

Commit Message

Kuninori Morimoto Aug. 3, 2009, 4:52 a.m. UTC 
There was no big meaning in the support of SVGA,
but 720p support is necessary for ms7724se board.
So, this patch support 720p instead of SVGA.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
---
 arch/sh/boards/mach-se/7724/setup.c |   28 ++++++++++++++++++----------
 1 files changed, 18 insertions(+), 10 deletions(-)

Comments

Paul Mundt Aug. 4, 2009, 5:46 a.m. UTC | #1 
On Mon, Aug 03, 2009 at 01:52:03PM +0900, Kuninori Morimoto wrote:
> There was no big meaning in the support of SVGA,
> but 720p support is necessary for ms7724se board.
> So, this patch support 720p instead of SVGA.

On Mon, Aug 03, 2009 at 01:52:24PM +0900, Kuninori Morimoto wrote:
> 
> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
> ---
>  arch/sh/include/asm/dma-sh.h           |    1 +
>  arch/sh/include/cpu-sh4/cpu/dma-sh4a.h |    3 ++-
>  2 files changed, 3 insertions(+), 1 deletions(-)
> 
Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 7f506b1..52ea80e 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -41,7 +41,15 @@ 
  * SW41 : abxx xxxx  -> a = 0 : Analog  monitor
  *                          1 : Digital monitor
  *                      b = 0 : VGA
- *                          1 : SVGA
+ *                          1 : 720p
+ */
+
+/*
+ * about 720p
+ *
+ * When you use 1280 x 720 lcdc output,
+ * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
+ * and change SW41 to use 720p
  */
 
 /* Heartbeat */
@@ -637,15 +645,15 @@  static int __init devices_setup(void)
 	sh_eth_init();
 
 	if (sw & SW41_B) {
-		/* SVGA */
-		lcdc_info.ch[0].lcd_cfg.xres         = 800;
-		lcdc_info.ch[0].lcd_cfg.yres         = 600;
-		lcdc_info.ch[0].lcd_cfg.left_margin  = 142;
-		lcdc_info.ch[0].lcd_cfg.right_margin = 52;
-		lcdc_info.ch[0].lcd_cfg.hsync_len    = 96;
-		lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
-		lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
-		lcdc_info.ch[0].lcd_cfg.vsync_len    = 2;
+		/* 720p */
+		lcdc_info.ch[0].lcd_cfg.xres         = 1280;
+		lcdc_info.ch[0].lcd_cfg.yres         = 720;
+		lcdc_info.ch[0].lcd_cfg.left_margin  = 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len    = 40;
+		lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len    = 5;
 	} else {
 		/* VGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 640;